Greater London · England
Bath re-enamelling & resurfacing in Coldharbour, Greater London
Bath re-enamelling across Coldharbour and nearby, done in a single visit in most cases.
- Resurfacing from £350
- Worn patches where water runs and sits
- A roll-top that is seen better days
Bath re-enamelling in Coldharbour without replacing anything
Re-enamelling gives a worn bath a new glossy surface without a refit. It’s the answer when the whole bath is tired rather than one spot. If you’re dealing with an outdated colour you’d like to change and an old resurfacing that’s failing, we can usually put it right.
Peace of mind is built in: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Coldharbour (E14, SE10, E22)
- County
- Greater London
- Cover
- One year on every repair
- Quote
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Your questions about bath re-enamelling in Coldharbour
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Is there a smell?
A little, during the work. We set up ventilation and the smell fades as it cures.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as homeowners across Greater London.
What happens once I’ve sent photos?
We look at the photos and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just ensure the landlord agrees.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, access to the room.
Do you cover Coldharbour?
Yes. We work across the UK and come to Coldharbour. Send us pictures for a fixed quote, or call 0345 017 0787.
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
What we do, step by step
There is not much you need to do on the day. Let us in and show us the room, and we will get on with it. The job generally runs to the best part of a day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Open a window if you can
- Ensure the area is dry
- Let us know if it has been repaired before
How to get a price
Email us a picture of the damage and a wider shot of the whole item, and tell us you’re in Coldharbour, and we’ll come back with a fixed quote.
Advice
Work for landlords and builders
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
When we would advise against a repair
Some problems need a builder, plumber or fitter rather than us:
- Plumbing leaks, which need a plumber
- Steel that has corroded right through
- Damage hidden under a previous coating, until it’s stripped back
If in doubt, send pictures and we’ll say what we think before booking.
Surfaces we repair
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
Aftercare tips
Aftercare is simple, and it makes a real difference:
- Don’t leave bottles, razors or sponges standing on the surface
- Avoid suction-cup mats
- Dry the bath after use to stop limescale
- A dripping tap should be fixed promptly
Wipe the bath dry after use where you can, particularly with hard water, and rinse off any bath products.
If a previous coating is starting to peel, don’t pick at it. Moisture gets underneath and makes it worse, so have it stripped and resurfaced.
Why repair rather than replace?
Replacing a bath usually involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Resurfacing from £350, with every job priced individually. There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
What you get with us
- Everything repaired in place
- Honest advice, even when it means no job
- Colour mixed on the day to match
- Dust sheets down, tidy finish
Read our pricing and guide to resurfacing and replacement costs.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Places near Coldharbour
Also in Coldharbour
Common problems we fix in Coldharbour
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
Signs it’s time to call us include:
- A dull, rough surface that will not come clean
- Chips and rust in more than one place
- Stains that won’t shift
- A coating lifting around the plughole
Before booking anyone
- What happens if the damage is worse than the photos show
- How soon you can use it again
- How to look after the finish
- Whether a trained technician does the job
Our work in Coldharbour
Coldharbour is about 2 miles north of Greenwich, in Greater London. Jobs in Coldharbour are booked in like any other job: a fixed quote from photos, then a visit to do the work. Coldharbour is one of 764 places in Greater London we cover.
Jobs in E14, SE10 and E22 are booked in the same way as anywhere else. You’ll find streets such as Canada Square, Simpson's Road and Amsterdam Road. Main roads around Coldharbour include the A1206 and A1261, so getting to you is simple. Other places close to Coldharbour include Blackwall (1 mile north-east), London Docklands (1 mile west), Poplar (1 mile north-west), Canary Wharf (1 mile west) and Heron Quays (1 mile west). Further out, we also cover London (4 miles west), City of Westminster (6 miles west), Marylebone (6 miles west), Kensington (8 miles west), St Pancras (5 miles west) and Shoreditch (3 miles north-west).
Near you in Coldharbour
Typical jobs here are in homes near The Gun pub, Woolmore Primary School and All Saints Church. Nearby too are Mudchute Park and Farm (0.8 miles south), Canary Wharf College 3 (0.7 miles south-west) and Tower Hamlets College (0.6 miles north-west). The nearest railway station is Canary Wharf station, about 0.5 miles north-west of the centre. Further afield, we also cover the area around Poplar Hospital (0.6 miles north) and Surrey Quays Shopping Centre (1.8 miles west). Not far away are Tower Hill and Lavender Pond.
- Parks and local facilities nearby include Holy Trinity (2.3 miles north-west)
About our accreditations · Every repair comes with a one-year guarantee.
