Greater London · England

Bath re-enamelling & resurfacing in Marylebone, Greater London

Full bath re-enamelling and resurfacing in Marylebone, carried out at your home and guaranteed for a year.

  • Resurfacing from £350
  • Thin, worn enamel in places
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Marylebone?

Should you replace it?

When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. The price reflects the work involved, not your postcode. You will see the full price before you book, with nothing added on the day.

What you get with us

  • Rooms protected and left tidy
  • One price list for the entire UK
  • No need to remove anything
  • Colour mixed on the day to match

Take a look at our pricing and guide to resurfacing and replacement costs.

How we handle bath re-enamelling in Marylebone

Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Resurfacing them in place keeps the original bath. Typical jobs include an old resurfacing that’s failing and a bath that stays dull however much you clean it, in cast iron baths, pressed steel baths and Victorian roll-tops.

Your repair is guaranteed for a year, as with every job we do.

Stained basin resurfaced to clean white (before and after)
Where
Marylebone (W1U, W1T, W1K)
Area hub
Greater London
Guarantee
One year on every repair
Quotes
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026

How we price bath re-enamelling

Prices start from £350. We give every job a fixed price from photos. These are the things that affect it:

  • How many items we do on one visit
  • What the surface is made of
  • How hard the colour is to match
  • Where the damage is and how we get to it

We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Getting a price from pictures

You can take the pictures on your phone, there is no need for anything special. Make sure they show:

  • Any earlier repairs or coatings
  • Natural light rather than flash
  • A picture taken from further back
  • Any details about the material

Upload a photo of the damage and a wider shot of the whole item, and tell us you are in Marylebone, and we will come back with a fixed quote.

What we do, step by step

We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes the best part of a day. Before we leave, we explain the curing time and the aftercare.

  1. We sheet, mask and ventilate the room.
  2. We remove the old silicone and deep clean the bath.
  3. Chips, rust and pitting are repaired.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure.

How to prepare

  • Keep a parking space free if you can
  • Mention any earlier repairs or resurfacing
  • Ensure the area is dry

Getting a price

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

Get a free quote

Read more

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.

We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

What we can’t put right

Some problems need a builder, plumber or fitter rather than us:

  • A cast iron or steel bath that’s cracked right through
  • Damage hidden under a previous coating, until it’s stripped back
  • Leaking taps or wastes (a plumber’s job)

Send us pictures and we will tell you honestly before booking.

What we work on

  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths
  • Basins & shower trays
  • Pressed steel baths

Should I try a DIY kit first?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.

Covering Marylebone

Marylebone is about 3 miles north-west of London, in Greater London. Whether you’re in the middle of Marylebone or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover 764 places in Greater London, from the larger towns to small villages.

Our technicians cover all of the W1U, W1T and W1K postcode area. That includes homes on Park Lane, Duck Lane and Bruton Lane and the roads around them. You’ll find Marylebone on the A400 and A401, which makes it straightforward to reach. If you are just outside Marylebone, we cover City of Westminster (1 mile south-west), Mayfair (1 mile south), Fitzrovia (1 mile north-east), Burlington Estate (1 mile south-east) and Soho (1 mile south-east). Within a short drive, we also cover London (3 miles south-east), Kensington (3 miles south-west), Shoreditch (3 miles east), Walthamstow (7 miles north-east), Hoxton (3 miles north-east) and Whitechapel (3 miles east). Marylebone is one of the larger places we cover in Greater London.

Around Marylebone

Locally, our jobs take us to homes close to Russian chapel on Welbeck Street, St Vincent's Catholic Primary School and Royal Society of Medicine Library, among other places. Other local landmarks include The St Marylebone CofE School (within half a mile north-west), The Phoenix pub (under half a mile south-east), The St Marylebone CofE School (under half a mile north-west) and St Anne's Churchyard (0.7 miles south-east). Marylebone has its own railway station: Bond Street station. Other landmarks nearby include Twist Museum (within half a mile south-east) and Montfichet's Tower (2 miles east). The countryside around Marylebone includes Adelaide Nature Reserve and St. James's Park Lake.

  • Other local spots include Westminster St James (0.8 miles south-east)
Map of Marylebone © OpenStreetMap contributors

When to call us in Marylebone

Older baths often have several problems at once: worn patches, chips, rust spots and stains. Resurfacing sorts them out together.

People normally call us after spotting one of these:

  • A roll-top that’s seen better days
  • Thin, worn enamel in places
  • Enamel that is lost its shine and feels rough
  • Staining under the taps and around the waste

What your quote should include

  • A fixed price, and whether VAT is included
  • Whether there are any call-out or travel charges
  • How to care for the finish
  • What happens if they find more damage

10 questions to ask before you book

Materials and what they mean for the repair

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Questions from Marylebone

What areas do you cover?

All of Greater London, and the rest of the UK. Travel is included in the price.

Someone resurfaced my bath and it’s peeling. Can you help?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Do I have to be there?

Someone needs to let us in and show us the job. You don’t need to watch us work.

Does the bath have to be removed?

No. It’s re-enamelled where it stands, so nothing else is disturbed.

Is there any odour?

It depends on the job, but frequently a little. Ventilation keeps it to a minimum, and it soon fades.

What if the damage is worse than the photos show?

Your quote covers the damage in the photos. If there’s more, we’ll tell you before starting.

Can you redo someone else’s repair?

Yes, regularly. Removing the old work can add time, and that’s in the quote.

Do you work for landlords and businesses?

Yes. We carry out repairs for homeowners, landlords, letting agents, builders and businesses in Marylebone.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.