Somerset · England
Bath re-enamelling & resurfacing in Cole Hill, Somerset
Bath re-enamelling for Cole Hill, without a refit. Send us pictures for a fixed quote, then we come to you.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Wear marks under the taps
Work for landlords and builders
We work for landlords, letting agents and housing providers in Cole Hill as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Bath re-enamelling in Cole Hill, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is typically the most cost-effective option. There’s no removal, plumbing or tiling involved. Whether it’s stains that won’t shift and thin, worn enamel in places, we can normally put it right, on Victorian roll-tops, basins & shower trays and acrylic baths alike.
Every job is backed for twelve months. We return to put right any problem with the work.
- Area
- Cole Hill (BA11)
- Region
- Somerset
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
About Cole Hill
Cole Hill is about 3 miles south-east of Frome, in Somerset. From the centre of Cole Hill to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Cole Hill is one of 640 places in Somerset we cover.
Postcode districts we cover here: BA11. Other places close to Cole Hill include East Woodlands (1 mile north-west), Elliots Green (1 mile north), Lane End (1 mile north-east), Corsley Heath (2 miles north-east) and Lower Marston (2 miles west). Further out, we also cover Frome (3 miles north-west), Midsomer Norton (10 miles north-west), Shepton Mallet (11 miles west), Radstock (9 miles north-west), Wincanton (11 miles south-west) and Castle Cary (12 miles south-west).
Around Cole Hill
In Cole Hill, that means homes near Horse & Groom pub and Church of St Katherine, among other places. For rail, the closest station is Frome station, roughly 2.1 miles north of the centre. Further afield, we also cover the area around Nunney Castle (3.8 miles west). Green spaces nearby include Vallis Vale and Shearwater.
Do you need bath re-enamelling in Cole Hill?
Enamel does not fail overnight. Abrasive cleaners, limescale and years of use dull the surface, starting where water runs and sits.
Typical reasons for a call-out include:
- A coloured bath you want in white
- A dull, rough surface that will not come clean
- Several chips and rust patches
- An old resurfacing that is failing
Before booking anyone
- What preparation is included
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- How long it needs to cure
What affects the price in Cole Hill
Resurfacing from £350. Each job gets its own fixed price. These are the things that affect it:
- The size and number of damaged areas
- The material and finish
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
What it costs depends on how much damage there is and what kind, the material and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before booking.
Send photos for a quote
When you take your pictures, these tips help us give you a firm price:
- Good light, ideally daylight, without flash glare
- The postcode, so we can plan the visit
- One sharp close-up of the damage
- One picture of the entire bath
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Towns and villages near Cole Hill
Other services in Cole Hill
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
What we do, step by step
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job generally takes a full day. We clean up when we are done and let you know when you can use it again.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the next day, the bath is ready.
Before we arrive
- Keep pets and children out of the room while we work
- Keep a parking space free if you can
- Move bottles, mats and clutter away from the area
Get a quote
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we’ll come back with a fixed figure.
Read more
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. The bath needs to be firm and well supported.
Questions from Cole Hill
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Can you price it without visiting?
Typically, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you change the colour of my bath?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
How long does re-enamelling take?
Most baths are done in a day, ready the following day. We give you timings with the quote.
When can you do it?
Your quote comes with available dates. Tell us if you need it done quickly.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.
Do you cover the entire of Somerset?
The entire UK, including all of Somerset. Just include your postcode and we’ll offer you dates.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Cole Hill.
Repairing versus replacing in Cole Hill
For a sound bath, resurfacing costs far less than replacement, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Cole Hill customers choose us
- Straight answers about what a repair can do
- Every repair guaranteed for a year
- One price list for the entire UK
- Colours mixed by hand to suit your surface
Take a look at our pricing and guide to resurfacing and replacement costs.
Aftercare tips
It’s all simple stuff:
- Avoid suction-cup mats
- Respect the curing time we give you
- Repair dripping taps early
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
About our accreditations · Every repair comes with a one-year guarantee.
