Wiltshire · England
Bath re-enamelling & resurfacing in Lane End, Wiltshire
Fixed-price bath re-enamelling in Lane End and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A period or roll-top bath worth keeping
About our bath re-enamelling in Lane End
Most baths are re-enamelled in a day, and you can use the bath the day after. Nothing is disconnected or removed. Whether it’s a dull, rough surface that won’t come clean and a coloured bath you want in white, we can usually put it right, on pressed steel baths, acrylic baths and basins & shower trays alike.
Big or small, you get the same one-year guarantee in Lane End and across Wiltshire.
- Location
- Lane End (BA12)
- Area hub
- Wiltshire
- Warranty
- One year on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
For landlords and businesses
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Lane End, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
Our work in Lane End
Lane End is about 3 miles south-east of Frome, in Wiltshire. From the centre of Lane End to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Lane End is one of 425 places in Wiltshire we cover.
Every address in BA12 is covered, from the main roads to the quietest streets. You will find streets such as Lanes End Hill and Geys Hill. Nearby, we also work in Lye's Green (1 mile north-east), Corsley Heath (1 mile east), Elliots Green (1 mile west), Temple (1 mile south-east) and Corsley (1 mile north-east). Within a short drive, we also cover Trowbridge (8 miles north), Westbury (5 miles north-east), Melksham (13 miles north-east), Warminster (4 miles east), Corsham (15 miles north) and Bradford-on-Avon (9 miles north).
Around Lane End
Typical jobs here are in homes near North Hill House School, The Royal Oak pub and Church of St Mary, among other places. The closest station to Lane End is Frome station, roughly 2.1 miles north-west of the centre. Other landmarks nearby include Nunney Castle (4.7 miles west) and Warminster Museum (3.9 miles east). Not far away are Cley Hill and Shearwater.
Common questions in Lane End
Will you leave a mess?
Dust sheets and masking go down before we start, and we clean up when we have finished.
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Will the bath be moved?
No. We resurface it in place, so the tiles and taps stay put.
Do you cover the entire of Wiltshire?
All of Wiltshire, and the rest of the UK. There’s no extra charge for travel.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Can pets and children be at home?
Yes, as long as they stay out of the room we’re working in. We will tell you when the room can be used again.
Can you do the outside of a roll-top?
Yes, frequently. The inside is resurfaced, and we can refinish the outside as well.
When to call us in Lane End
Enamel’s shine is only skin deep, and abrasive cleaning slowly wears it away. After years of use, the surface becomes porous and stains easily.
It’s worth getting a quote if you see:
- A roll-top that’s seen better days
- Worn patches where water runs and sits
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
Questions to ask before you book
- Who turns up on the day
- Whether the colour is mixed to match
- How to look after the finish
- How the room is protected while they work
How it works
We work cleanly and quietly, so you can stay at home while we are there. Protection goes down first, then the work takes a full day. At the end we talk you through how soon it can be used and how to care for it.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Preparing for the visit
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
How to get a price
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Read more
What a repair cannot fix
A few problems are outside what a surface repair can do:
- Damage hidden under a previous coating, until it’s stripped back
- A poorly supported acrylic bath, until it’s firmed up
- Steel that has corroded right through
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Acrylic baths
What affects the price in Lane End
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- Doing more than one item at once
- Unusual colours or finishes
- How much damage there is
- Where the damage is and how we get to it
Rather than charging by the hour, we fix the price before we start. Damage, material and access decide it, and doing several items at once reduces it.
Send pictures for a quote
Two or three clear photos are normally enough. Try to include:
- A coin beside the damage so we can judge size
- Details of any past repairs
- A clear, close picture of the problem area
- Where you are, by postcode
Upload photos of the damage and a wider shot of the entire item, and tell us you’re in Lane End, and we will come back with a fixed quote.
Aftercare tips
After the repair has cured, a few habits help it last:
- Repair dripping taps early
- Don’t leave a chip unrepaired
- Stick to gentle, non-abrasive cleaners
- Never use suction bath mats
Use mild, non-abrasive cleaners, avoid suction bath mats, and do not leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Towns and villages near Lane End
Also in Lane End
Different materials, different repairs
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
