Staffordshire · England
Bath re-enamelling & resurfacing in Colton, Staffordshire
We travel to Colton for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- Staining under the taps and around the waste
Bath re-enamelling at your home in Colton
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you’re dealing with brown or grey marks that don’t clean off and a period or roll-top bath worth keeping, we can typically put it right.
Every job is backed for twelve months in Colton and everywhere else. We return to put right any problem with the work.
- Location
- Colton (WS15)
- Region
- Staffordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Materials and what they mean for the repair
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Nearby places to Colton
What else we do in Colton
Landlords, agents and businesses in Colton
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
What affects the price in Colton
Prices start from £350. A fixed quote means you know the cost before you book. We look at:
- Doing more than one item at once
- The size and number of damaged areas
- Where the damage is and how we get to it
- What the surface is made of
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
How to get a fixed price
Good pictures mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- A picture taken from further back
- A close-up of the damage, in focus
- Any details about the material
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Keeping it looking good
Looking after the surface is easy, and it makes a real difference:
- Never use suction bath mats
- Keep toiletries on a shelf rather than in the bath
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Acting earlier keeps the preparation simpler.
Do you need bath re-enamelling in Colton?
Many baths we resurface have simply been well used. The body of the bath is typically perfectly sound.
Look out for any of the following:
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
- An outdated colour you’d like to change
- Staining under the taps and around the waste
What your quote should include
- How the room is protected while they work
- What happens if they find more damage
- What aftercare is recommended
- What the guarantee covers, and for how long
When a repair isn’t the answer
It helps to know what we cannot do too:
- Holes rusted through the metal
- A bath split right through the body
- Plumbing leaks, which need a plumber
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Cast iron baths
Our work in Colton
Colton is about 2 miles north of Rugeley, in Staffordshire. Across the WS15 area, we carry out the work at your property. Colton is one of 512 places in Staffordshire where we work. Our jobs stretch from Colton to Birmingham (22 miles away).
Our visits in WS15 work the same way as everywhere else we cover. We regularly work on streets such as High Street, Aspley Place and Martlin Lane and the roads around them. Other places close to Colton include Stockwell Heath (1 mile north), Bishton (2 miles west), Rugeley (2 miles south), Etchinghill (2 miles south-west) and Slitting Mill (2 miles south-west). Within a short drive, we also cover Stafford (8 miles west), Burton upon Trent (12 miles east), Tamworth (15 miles south-east), Cannock (7 miles south-west), Lichfield (8 miles south-east) and Burntwood (7 miles south).
Near you in Colton
Around Colton, we work in homes near The Hart School, Church of St Mary and The St. Mary's CofE Primary School, among other places. Colton’s nearest station is Rugeley Trent Valley station, about 1 mile south of the centre. Further afield, we also cover the area around Cannock Castle Ring (4.8 miles south) and Museum of Childhood And Costume (2.2 miles north). Not far away are Tixall Wide and Wolseley Centre.
Colton questions
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
How soon can you come?
Your quote comes with available dates. If it’s urgent, say so and we will do what we can.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you redo someone else’s repair?
Generally, yes. Tell us what was done before and we will plan for it.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Do you come to Colton?
We do. Technicians travel to Colton from across the region, and the price is the same as everywhere else.
Can you re-enamel a roll-top bath?
Yes, often. We resurface the inside, and the outside can be refinished too.
Repairing versus replacing in Colton
A refit takes several trades and several days. Re-enamelling takes one technician and usually one day, with the bath ready the following day. Prices start from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why Colton clients choose us
- A fixed quote before you book
- We’ll tell you if it’s not worth repairing
- Colour mixed on the day to match
- Technicians who travel to you, UK-wide
See our pricing or guide to resurfacing and replacement costs.
How it works
Arrival times are agreed in advance. On site, it takes the best part of a day for most jobs. The room is left tidy and you will know when it can be used.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Let us know which floor the room is on
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
