Isle of Wight · England

Bath Re-enamelling for Colwell homes

Fixed-price bath re-enamelling in Colwell and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Resurfacing from £350
  • A coloured bath you want in white
  • Worn patches where water runs and sits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Colwell

About our bath re-enamelling in Colwell

We don’t move the bath, so the taps, tiles and plumbing are not touched. It typically takes one visit, with the bath ready to use the following day. We are often asked to fix thin, worn enamel in places and enamel that’s lost its shine and feels rough, in basins & shower trays, pressed steel baths and cast iron baths.

Peace of mind is built in: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.

Before and after: an old basin refinished to bright white
Location
Colwell (PO40, PO39)
County
Isle of Wight
Guarantee
12 months on all our work
Quotes
From £350. Fixed and free, based on pictures
Telephone
0345 017 0787
Updated
23 October 2026

Can I fix it myself?

We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

Repairing versus replacing in Colwell

Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why choose Surface Doctor in Colwell

  • Colours mixed by hand to suit your surface
  • Accredited with CHAS, Constructionline and SafeContractor
  • Fixed prices from your pictures
  • No extra charge for your area

Read our prices page and resurfacing vs replacement cost guide.

Repairs by material

Pressed steel

Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Signs you need bath re-enamelling in Colwell

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.

Typical reasons for a call-out include:

  • An old resurfacing that is failing
  • Worn patches where water runs and sits
  • A coloured bath you want in white
  • Stains that will not shift

What to look for in a quote

  • What prep work is covered
  • How soon you can use it again
  • Whether the price is fixed and includes VAT
  • What protection goes down before work starts

10 questions to ask before you book

When a repair is not the answer

A few problems are outside what a surface repair can do:

  • An acrylic bath that flexes badly underfoot
  • Plumbing leaks, which need a plumber
  • Damage hidden under a previous coating, until it’s stripped back

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Pressed steel baths
  • Basins & shower trays
  • Cast iron baths
  • Victorian roll-tops
  • Acrylic baths

Keeping it looking good

Good habits make a big difference to how long a repair lasts:

  • Have chips seen to early
  • Avoid suction-cup mats
  • Fix dripping taps quickly
  • Stick to gentle, non-abrasive cleaners

Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.

Rust spots on a worn bath get worse with time. It’s simpler to resurface before they spread.

FAQs for Colwell

What does bath re-enamelling cost?

Resurfacing from £350. We give a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Is it messy?

We protect the room with dust sheets and masking first, and we clean up when we have finished.

I rent my home. Can I book you?

Yes. Check with your landlord; we can send the quote to them too.

When can you do it?

That depends on our diary for your area. We’ll offer you dates when we send your quote.

Do you come to Colwell?

We do. Technicians travel to Colwell from across the region, and the price is the same as everywhere else.

Can you do more than one item on the same visit?

Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.

What happens once I’ve sent photos?

We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we’ll ask for another photo.

Which areas do you work in?

We work UK-wide, and that includes Colwell. Our prices are the same everywhere.

Landlord and trade work in Colwell

We carry out planned and one-off repairs for housing associations and facilities teams in Isle of Wight and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

We’re used to working with agents and managing companies. Send the address, pictures and access details and we’ll handle the rest.

What we do, step by step

From the moment we arrive, we keep the work contained to the one room. Surfaces nearby are masked off, the job takes most of the day, and we finish by cleaning up and talking you through the result.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. Chips, rust and pitting are repaired.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the following day.

Getting ready for the visit

  • Tell us about parking, stairs or access
  • Have somewhere for us to park nearby if possible
  • Let us know which floor the room is on

Get a quote

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed quote. There’s no charge for the quote and you’re under no obligation.

Get a fixed price

Related advice

Covering Colwell

Colwell is about 5 miles south of Lymington, in Isle of Wight. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Colwell is one of 125 towns and villages in Isle of Wight where we work.

We cover every part of the PO40 and PO39 postcode area. From Colwell Chine Road, Heath Lane and Chine Close or a nearby road, a technician can come to you. We also cover the places around Colwell: Totland (1 mile south-west), Freshwater (1 mile south-east), Norton Green (1 mile north-east), Easton (1 mile south-east) and Afton (1 mile south-east). Further out, we also cover Newport (10 miles east), Cowes (11 miles north-east), East Cowes (12 miles north-east), Barton (11 miles east), Hunny Hill (10 miles east) and Cross Lane (11 miles east). If you are somewhere remote, ring us first and we’ll plan the trip.

Near you in Colwell

In Colwell, that means homes near All Saints Church of England Primary School, Christ Church and Colwell Bay Inn, among other places. For rail, the closest station is Lymington Pier station, about 4.9 miles north of the centre. Well-known places in the area include Yarmouth Castle (2 miles north-east) and Medina (less than half a mile south-west). Green spaces nearby include Tennyson Down and Lymington and Keyhaven Marshes Nature Reserve.

Map of Colwell © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.