Isle of Wight · England
Bath Re-enamelling for Totland homes
Bath re-enamelling across Totland and nearby, usually in one visit.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Several chips and rust patches
How we handle bath re-enamelling in Totland
Re-enamelling is a one-day job for most baths, with the bath ready to use the following day. Nothing is disconnected or removed. Whether it’s an outdated colour you’d like to change and a roll-top that’s seen better days, we can help, whatever the material.
Your repair is guaranteed for a year, as with every job we do.
- Area
- Totland (PO39, PO40)
- Region
- Isle of Wight
- Guarantee
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
What we do, step by step
Nothing needs to be moved out of the room. We bring everything we need with us, lay protective sheets and start once you are happy with the plan. It typically takes most of the day, and you can get on with other things while we are there.
- The room is masked, protected and ventilated.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Let us know which floor the room is on
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
Ask for a price
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Places near Totland
More services for Totland
Landlord and trade work in Totland
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
If you manage property in Totland, we will quote for several properties at once. Send pictures for each one and we’ll come back with a combined price.
Repairing versus replacing in Totland
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Prices start from £350. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Totland customers choose us
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- Colour-matched on site
- We will tell you if it’s not worth repairing
Take a look at our prices page or resurfacing vs replacement cost guide.
What we can’t put right
A few problems are outside what a surface repair can do:
- Steel that has corroded right through
- A cast iron or steel bath that’s cracked right through
- Damage hidden under a previous coating, until it’s stripped back
Send us photos and we’ll tell you honestly.
What we work on
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Cast iron baths
Totland and the surrounding area
Totland is about 5 miles south of Lymington, in Isle of Wight. From the centre of Totland to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We cover all 125 towns and villages across Isle of Wight.
Every address in PO39 and PO40 is within our area, from the main roads to the quietest streets. We regularly work on streets such as Meadow Barn Close, Ward Road and Weston Road and the roads around them. Totland sits on or near the B3322, which makes travel easy. We also travel to Colwell (1 mile north-east), Freshwater (1 mile east), Easton (1 mile east), Norton Green (1 mile north-east) and Afton (1 mile east). We also work in nearby towns such as Newport (11 miles east), Cowes (12 miles north-east), East Cowes (12 miles north-east), Barton (11 miles east), Hunny Hill (11 miles east) and Cross Lane (11 miles east). Some remote addresses need extra planning, so call us to arrange it.
Landmarks near Totland
We visit homes around Colwell Bay Inn, Christ Church and St Saviour's Catholic Primary School. Other landmarks nearby include Dimbola Museum And Galleries (1.2 miles south-east) and Yarmouth Castle (2.5 miles north-east). For a walk, there’s Lymington and Keyhaven Marshes Nature Reserve and Tennyson Down.
- Other local spots include Medina (less than half a mile north)
Repairs by material
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Steel frequently rusts by the plughole, so we check it carefully.
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Have chips seen to early
- Clean with a soft cloth and mild detergent
- A quick wipe after use keeps limescale away
- Repair dripping taps early
Dry the bath after use if possible, particularly with hard water, and rinse away any product left on the surface.
Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
When to call us in Totland
Many baths we resurface have simply been well used. Underneath, a cast iron or steel bath is usually as strong as ever.
Clients generally contact us about:
- Staining under the taps and around the waste
- Worn patches where water runs and sits
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
What to look for in a quote
- What happens if the damage is worse than the photos show
- The length of the guarantee and what it covers
- What protection goes down before work starts
- What preparation is included
Totland: your questions answered
Can you do more than one item on the same visit?
Yes, and it’s frequently cheaper. Send pictures of everything together and you will get one combined price.
Can landlords book you?
We do, regularly. We can quote for several properties together and work between tenancies.
Do you charge for travel?
We don’t add a call-out fee. The fixed price covers the visit and the work.
What areas do you cover?
Everywhere in the UK, Totland included. Travel is included in the price.
Do I have to be there?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
What happens after I send pictures?
You will get a fixed quote back, plus dates. You’re under no obligation.
Is it safe with children and pets around?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Do you work in Totland?
Yes, we do. We send a technician to Totland for every job, with no extra charge for travel.
About our accreditations · Every repair comes with a one-year guarantee.
