Devon · England
Bath re-enamelling & resurfacing in Combpyne, Devon
Bath re-enamelling in and around Combpyne: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A coating lifting around the plughole
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the work takes the best part of a day, and we finish by cleaning up and talking you through the result.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
How to prepare
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
- Mention if the room is upstairs or in a flat
Ask for a price
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
Bath re-enamelling at your home in Combpyne
A re-enamelled bath looks and feels like a new one, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. We regularly repair Victorian roll-tops, pressed steel baths and acrylic baths, and the jobs we see most are a period or roll-top bath worth keeping and several chips and rust patches.
Big or small, it’s backed by a one-year guarantee.
- Area
- Combpyne (EX13)
- Area hub
- Devon
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Also in Combpyne
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send photos.
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Repairs by material
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Combpyne questions
Do you need to take the bath out?
No. We resurface it in place, so nothing else is disturbed.
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Which areas do you work in?
Across the UK, and that includes Combpyne. Our prices are the same everywhere.
Do I need to be at home?
We need someone to let us in. You don’t need to watch us work.
Is the work guaranteed?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
What happens next?
You get a fixed price and available dates. If we need another angle, we’ll ask.
Can I get a quote without a visit?
Yes, almost always. Clear pictures let us give you a fixed price without visiting.
Does re-enamelling smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Landlords, agents and businesses in Combpyne
For anyone letting property in or around Combpyne, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Our work in Combpyne
Combpyne is about 9 miles south-east of Honiton, in Devon. Wherever you are in the EX13 postcode area, we carry out the work at your property. Combpyne is one of 586 towns and villages in Devon where we work.
All of EX13 is within our area, from the main roads to the quietest streets. Other places close to Combpyne include Musbury (2 miles north-west), Axmouth (2 miles west), Maidenhayne (2 miles north-west), Colyford (3 miles west) and Kingsdon (3 miles north-west). We also work in nearby towns such as Sidmouth (10 miles west), Honiton (9 miles north-west), Seaton (3 miles west), Axminster (4 miles north), Budleigh Salterton (15 miles south-west) and Ottery St Mary (12 miles west).
Near you in Combpyne
Our clients here include homes close to Church of St Mary. For rail, the closest station is Axminster station, roughly 3.7 miles north. Nearby you will also find Museum of Motoring Memories (2.4 miles west) and Colcombe Castle (3 miles north-west).
What affects the price in Combpyne
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- How many items we do on one visit
- Whether old repairs or coatings need taking off
- The type of damage
- Unusual colours or finishes
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so you know the cost before you book.
Quotes from your photos
When you take your photos, these tips help us give you a firm price:
- A wider photo showing the entire bath
- A close-up of the damage, in focus
- Daylight if possible, and no flash reflection
- The postcode, so we can plan the visit
To get a price, send a couple of pictures through our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Do you need bath re-enamelling in Combpyne?
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. Eventually the surface turns porous and stains.
Look out for these signs:
- Worn patches where water runs and sits
- A bath in a colour that no longer suits
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
What your quote should include
- What the guarantee covers, and for how long
- How your room will be protected
- What preparation is included
- Is the price fixed, and does it include VAT?
What we cannot put right
A few problems are outside what a surface repair can do:
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Looking after it afterwards
So the finish stays in good condition:
- Never use suction bath mats
- Wipe the bath dry after use in hard water areas
- Clean with a soft cloth and mild detergent
- Have chips seen to early
A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.
Rust spots on a worn bath get worse with time, and each one adds to the preparation. It’s simpler to resurface before they spread.
About our accreditations · Every repair comes with a one-year guarantee.
