Edinburgh · Scotland

Bath Re-enamelling in Comiston

Bath re-enamelling for Comiston, without a refit. Send us pictures for a fixed price, then book a visit.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A bath in a colour that no longer suits
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Comiston

Bath re-enamelling in Comiston, done in place

Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Typical jobs include an original cast iron bath that needs restoring and enamel that’s lost its shine and feels rough, across basins & shower trays, acrylic baths and cast iron baths.

We guarantee the work for a year. If something is not right in that time, we come back and put it right.

Where
Comiston (EH10, EH13)
Area hub
Edinburgh
Warranty
One year on every repair
Quote
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

How the visit works

Once we are through the door, we keep the work contained to the one room. Surfaces nearby are masked off, the work takes a full day, and we finish by cleaning up and talking you through the result.

  1. The room is masked, protected and ventilated.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. The surface is prepared and a bonding primer applied.
  4. We spray on the new enamel finish in several coats.
  5. We leave it to cure, and it’s normally ready the following day.

Before we arrive

  • Ensure the room can be ventilated
  • Keep a parking space free if you can
  • Tell us about parking, stairs or access

Ask for a price

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can price the job without visiting.

Send photos for a quote

Read more

Landlords, agents and businesses in Comiston

For anyone letting property in or around Comiston, we can repair and quote for several addresses together. Just send photos for each address and we will price them together.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

DIY kit or professional repair?

A DIY attempt isn’t a disaster. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.

We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

What we’re called out for in Comiston

Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use dull the surface, usually first under the taps and around the waste.

These are the problems we are asked about most:

  • Enamel that is lost its shine and feels rough
  • Brown or grey marks that do not clean off
  • Several chips and rust patches
  • An original cast iron bath that needs restoring

What to look for in a quote

  • Whether the colour is mixed to match
  • What protection goes down before work starts
  • Whether cleaning and preparation are in the price
  • What aftercare is recommended

Choosing a repair company

Materials and what they mean for the repair

Roll-top and period baths

We can resurface a roll-top inside and out, with the outside refinished as well.

Acrylic

We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.

Where we work around Comiston

Comiston is about 2 miles south of Edinburgh, in Edinburgh. Jobs in Comiston are booked in like any other job: a fixed quote from photos, then a visit to do the work. We work in 175 places across Edinburgh.

Here we cover the EH10 and EH13 postcode area. From Braid Road, Camus Avenue and Comiston Road or a nearby road, we can come to you. Other places close to Comiston include Oxgangs (1 mile south-west), Greenbank (1 mile north-west), Caiystane (1 mile south), Buckstone (1 mile east) and Colinton Mains (1 mile west). Larger places within reach include Leith (5 miles north), Bonnington (4 miles north), Greenside (3 miles north), Broughton (3 miles north), Bellevue (4 miles north) and Silvermills (3 miles north).

Landmarks near Comiston

Locally, our jobs take us to homes close to Firrhill High School, Army School of Bagpipe Music and Highland Drumming and Harrison Park. The nearest railway station is Slateford station, about 1.6 miles north-west. A little further out are Cameron Toll Shopping Centre (2.2 miles north-east) and Cockburn Geological Museum (1.8 miles north-east). The countryside around Comiston includes Duddingston Loch and Craiglockhart Hill.

Map of Comiston © OpenStreetMap contributors

Keeping it looking good

Good habits make a big difference to how long a repair lasts. Here’s what we suggest:

  • Stick to gentle, non-abrasive cleaners
  • Never use suction bath mats
  • Leave the bath for the full curing time before using it
  • Rinse off hair dye, oils and bath bombs right away

The first few days matter most: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.

Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.

Repairing versus replacing in Comiston

Replacing a bath typically involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, with the bath ready the following day. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

Why Comiston clients choose us

  • Colour-matched on site
  • Every repair guaranteed for a year
  • Honest advice, even when it means no job
  • We come to you, anywhere in the UK

Take a look at our full price list or guide to resurfacing and replacement costs.

Honest limits

Some problems need a builder, plumber or fitter rather than us:

  • A metal bath with a through crack
  • Problems we cannot see until an old finish comes off
  • Leaks from fittings rather than the bath

If in doubt, send pictures and we’ll say what we think.

Surfaces we repair

  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops

Comiston: your questions answered

Will the new finish last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.

Do the materials smell?

There can be some smell while we work, so we ventilate the room. It fades as everything cures.

How much does bath re-enamelling cost in Comiston?

Prices start from £350. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.

Can you fix a peeling bath coating?

Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you repair something that is been repaired before?

Usually, yes. The old repair comes out first.

Does someone need to be in?

Someone needs to let us in and show us the job. After that, you can carry on with your day.

How long is the bath unusable?

Most baths are done in a day, ready the day after. We will confirm timings when we quote.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.