Cambridgeshire · England
Bath Re-enamelling for Commercial End homes
Damaged bath in Commercial End? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- A peeling or bubbling previous coating
- A coloured bath you want in white
Bath re-enamelling in Commercial End without replacing anything
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. If you’re dealing with wear marks under the taps and lots of chips and rust spots, we can usually put it right, on cast iron baths, basins & shower trays and acrylic baths alike.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll sort it.
- Area
- Commercial End (CB25)
- Region
- Cambridgeshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to look after the repair
After the repair has cured, a few habits help it last:
- Dry the bath after use to stop limescale
- Use washing-up liquid and a soft cloth
- Get any chip repaired quickly
- Keep toiletries on a shelf rather than in the bath
A quick rinse and wipe after use helps, particularly where water is hard, to stop limescale building up.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Nearby places to Commercial End
More services for Commercial End
How the visit works
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes the best part of a day. If we find something your photos didn’t show, we will explain it before carrying on.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the next day.
Before we arrive
- Point us to the nearest place to park
- Let us know which floor the room is on
- Keep children and pets away from the room on the day
Get a quote
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. There is no charge for the quote and you’re under no obligation.
Advice
What affects the price in Commercial End
Resurfacing from £350. We give every job a fixed quote from photos. This is what makes a difference:
- Previous DIY repairs that have to come out
- The type of damage
- The material
- How many items we do on one visit
A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- Your postcode, so we can check dates
- Details of any past repairs
- Daylight if possible, and no flash reflection
- The material, if you know it
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
Repair or replace: which is better?
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Resurfacing from £350, with every job priced individually. We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- Most jobs done in one visit
- CHAS and Constructionline accredited
- Colour-matched on site
- A year’s guarantee on all work
Read our full price list and resurfacing vs replacement cost guide.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Commercial End and nearby
Commercial End is about 5 miles west of Newmarket, in Cambridgeshire. Our work suits any type of property, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. We work in 371 places across Cambridgeshire, from the larger towns to small villages. Our nearest city page is London, about 54 miles away.
Postcode districts we cover here: CB25. From Commercial End, Archers Close and Mill Lane or a nearby road, a technician can come to you. Close by, we cover Swaffham Bulbeck (1 mile south), Lode (1 mile west), Bottisham (2 miles south-west), Reach (2 miles north) and Stow cum Quy (3 miles south-west). Within a short drive, we also cover Cambridge (7 miles south-west), Newmarket (5 miles east), Ely (11 miles north), Cambourne (15 miles west), Littleport (15 miles north) and King's Hedges (6 miles west).
Near you in Commercial End
Our customers here include homes close to Royal Oak Public House, Swaffham Bulbeck Church of England Primary School and Church of Saint Mary the Virgin, among other places. The nearest railway station is Waterbeach station, roughly 3.7 miles west. A little further out are Bottisham Airfield Museum (2 miles south) and Newmarket Equine Hospital (3.7 miles south-east). Open spaces near Commercial End include Wicken Fen.
DIY kit or professional repair?
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
When to call us in Commercial End
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. That’s the point where re-enamelling makes sense.
Contact us if you’ve noticed any of these:
- Worn patches where water runs and sits
- An outdated colour you’d like to change
- Staining under the taps and around the waste
- A coating lifting around the plughole
Comparing quotes
- How to care for the finish
- How the room is protected while they work
- A fixed price, and whether VAT is included
- Whether they match the colour on site
When we’d advise against a repair
Not everything can be repaired, and we’ll tell you before we start. Repairs won’t solve:
- Holes rusted through the metal
- Problems we cannot see until an old finish comes off
- Leaks from fittings rather than the bath
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
Common questions in Commercial End
Do the materials smell?
There may be a mild smell during the work, which fades afterwards.
What happens after I send pictures?
You get a fixed price and available dates. If anything’s unclear, we’ll ask for another photo.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Does someone need to be in?
We need someone to let us in. You don’t need to watch us work.
How long will the bath be out of use?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Which areas do you work in?
Across the UK. Prices don’t change with location.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
About our accreditations · Every repair comes with a one-year guarantee.
