North Yorkshire · England
Bath Re-enamelling for Coneythorpe homes
Full bath re-enamelling and resurfacing for householders, landlords and businesses in Coneythorpe. Send pictures for a free, fixed quote.
- Resurfacing from £350
- A period or roll-top bath worth keeping
- Brown or grey marks that do not clean off
Bath re-enamelling at your home in Coneythorpe
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, so we do not cut corners on it. Our repair technicians work on cast iron baths, acrylic baths and pressed steel baths, and the jobs we see most are lots of chips and rust spots and an outdated colour you’d like to change.
All our work is covered by our one-year guarantee.
- Area
- Coneythorpe (HG5)
- Region
- North Yorkshire
- Cover
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Coneythorpe and the surrounding area
Coneythorpe is about 3 miles north-east of Knaresborough, in North Yorkshire. Jobs in Coneythorpe are booked in like any other job: a fixed price from your photos, then a visit to do the work. Coneythorpe is one of 626 towns and villages in North Yorkshire we cover. Our nearest city page is Leeds, about 16 miles away.
Here we cover the HG5 postcode area. We regularly work on streets such as Green Lane, Shortsill Lane and Clareton Lane. Nearby, we also work in Arkendale (1 mile north), Goldsborough (2 miles south-west), Ferrensby (2 miles north-west), Knaresborough (3 miles south-west) and Scriven (3 miles west). Within a short drive, we also cover Harrogate (6 miles west), Ripon (9 miles north-west), Tadcaster (11 miles south-east), Starbeck (5 miles south-west), Thirsk (15 miles north) and Bilton (6 miles west).
Local landmarks in Coneythorpe
Our clients here include homes close to The Tiger Inn. The nearest railway station is Knaresborough station, roughly 3.1 miles west. Nearby you’ll also find Claro (1.3 miles west) and Knaresborough Heritage Centre (2.9 miles south-west).
DIY repairs versus a professional job
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is typically cheaper.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Honest limits
Not everything can be repaired, and we’ll tell you before we start. We can’t fix:
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
- Plumbing leaks, which need a plumber
Send us pictures and we will tell you honestly before booking.
What we work on
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Acrylic baths
Do you need bath re-enamelling in Coneythorpe?
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
These are the problems we’re asked about most:
- Worn patches where water runs and sits
- Staining under the taps and around the waste
- Several chips and rust patches
- An old resurfacing that’s failing
Before you book anyone
- How long it needs to cure
- A fixed quote, and whether VAT is included
- How long the guarantee is and what it covers
- How your room will be protected
What happens on the day
Your technician turns up at the time we agreed with you and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take a full day, and the room is left clean and tidy.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the next day.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Ensure the room can be ventilated
- Mention if the room is upstairs or in a flat
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Read more
Also near Coneythorpe
What else we do in Coneythorpe
Repair or replace in Coneythorpe?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it.
Why Coneythorpe customers choose us
- Usually one visit, start to finish
- We’ll tell you if it’s not worth repairing
- Dust sheets down, tidy finish
- Free fixed quotes from pictures
Read our full price list or resurfacing vs replacement cost guide.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Whether old repairs or coatings need taking off
- How easy the damage is to reach
- How many areas need work
- What kind of damage it is
The price depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Natural light rather than flash
- Any details about the material
Most customers in Coneythorpe get their price from pictures. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we pay close attention there.
Your questions about bath re-enamelling in Coneythorpe
Do you cover the whole of North Yorkshire?
Everywhere in the UK, Coneythorpe included. There’s no extra charge for travel.
Is there a smell?
Yes, while we’re applying the finish. We set up ventilation and the smell fades as it cures.
How do I get a price for bath re-enamelling in Coneythorpe?
Resurfacing from £350. Because every job differs, we price from photos. You’ll get a fixed figure before you book.
How long will the bath be out of use?
One day for most baths, ready the next day. We give you timings with the quote.
What happens after I send pictures?
We come back with a fixed price. There is no obligation to book.
Will the bath be moved?
No. It’s re-enamelled where it stands, so the tiles and taps stay put.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
How durable is a resurfaced bath?
Look after it and it lasts. Gentle cleaning, no suction mats.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- Use washing-up liquid and a soft cloth
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
- Have chips seen to early
Use mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
