North Yorkshire · England
Bath Re-enamelling for Tadcaster homes
Full bath re-enamelling and resurfacing at your home in Tadcaster, with a one-year guarantee on every repair.
- Resurfacing from £350
- Lots of chips and rust spots
- A bath in a colour that no longer suits
Your questions about bath re-enamelling in Tadcaster
Is it OK to have pets in the house?
We ask you to keep children and pets out of the room while we work and until it has cured. The rest of the house is unaffected.
Can I get a quote without a visit?
Yes, almost always. Clear photos let us give you a fixed price without visiting.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
What happens next?
You get a fixed price and available dates. If we need another angle, we will ask.
Do the materials smell?
It depends on the job, but frequently a little. Open windows and an extractor fan help, and it soon fades.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
How we handle bath re-enamelling in Tadcaster
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. We regularly repair pressed steel baths, cast iron baths and acrylic baths, and the jobs we see most are chips and rust in more than one place and a bath that stays dull however much you clean it.
We stand behind the work with a one-year guarantee.
- Where
- Tadcaster (LS24)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Quote
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is normally the cheaper route.
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
What else we do in Tadcaster
Different materials, different repairs
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Repairing versus replacing in Tadcaster
Replacing a bath can take several days across several trades. Re-enamelling is one technician, usually one day, and the bath is usable the day after. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You will see the full price before booking.
Why Tadcaster clients choose us
- Straight answers about what a repair can do
- We leave the room as we found it
- Work done at your home or business
- CHAS and Constructionline accredited
See our pricing or guide to resurfacing and replacement costs.
Landlord and trade work in Tadcaster
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
How it works
We begin by going over the job with you, so you know exactly what we’re doing. Then the area is sheeted and masked and we start. You can expect it to take most of the day.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- We leave it to cure, and it’s usually ready the following day.
Before we arrive
- Have a window or extractor fan available
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
How to get a price
You do not need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
When we would advise against a repair
A repair is not right for every job, for example:
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we’ll say what we think before booking.
Materials we work on in Tadcaster
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- What the surface is made of
- How easy the damage is to reach
- What kind of damage it is
- The size and number of damaged areas
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Quotes from your pictures
You can take the photos on your phone, there’s no need for anything special. Just make sure we can see:
- A clear, close picture of the problem area
- Details of any past repairs
- Natural light rather than flash
- The material, if you know it
If you’re in Tadcaster and want a price, pictures are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Do you need bath re-enamelling in Tadcaster?
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
If you can see any of these, send us a photo:
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
- Several chips and rust patches
- An outdated colour you’d like to change
Comparing quotes
- What preparation is included
- Whether the price covers travel
- How to look after the finish
- When it can be used again
Tadcaster and the surrounding area
Tadcaster is about 9 miles south-west of York, in North Yorkshire. Jobs in Tadcaster are booked in like any other job: a fixed quote from photos, then a visit to do the work. We cover 626 places across North Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 13 miles away.
Our visits in LS24 work the same way as everywhere else we cover. Local streets include Station Road, High Street and Westfield Terrace, and we cover them all. Tadcaster is on the A64 and A659, so it’s easy for us to reach. Other places close to Tadcaster include Stutton (1 mile south), Oxton (1 mile east), Towton (2 miles south), Ulleskelf (3 miles south-east) and Scarthingwell (4 miles south). We also work in nearby towns such as Harrogate (13 miles north-west), Knaresborough (12 miles north-west), Selby (11 miles south-east), Starbeck (12 miles north-west), Bilton (14 miles north-west) and Harlow Hill (14 miles north-west).
Around Tadcaster
Our clients here include homes close to Tadcaster Grammar School, Tadcaster Social Club pub and St Joseph's Catholic Primary School, among other places. For rail, the closest station is Ulleskelf station, roughly 3 miles south-east. A little further out are Kyme Castle (1.4 miles north-west) and The Ark Museum (less than half a mile east).
About our accreditations · Every repair comes with a one-year guarantee.
