Cambridgeshire · England
Bath re-enamelling & resurfacing in Conington, Cambridgeshire
Damaged bath in Conington? We repair it in place, match it on site and guarantee the work for a year.
- Resurfacing from £350
- A dull, rough surface that will not come clean
- Lots of chips and rust spots
What we cannot put right
We’d rather lose a job than do one that won’t last, so these are the limits:
- Holes rusted through the metal
- A metal bath with a through crack
- Acrylic that moves when you stand in it
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
About our bath re-enamelling in Conington
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. We regularly repair cast iron baths, pressed steel baths and acrylic baths, and people most often call us about enamel that’s lost its shine and feels rough and an original cast iron bath that needs restoring.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Conington (PE7)
- County
- Cambridgeshire
- Guarantee
- A year, on every repair
- Price
- From £350. Free and fixed, from your photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, and get on with the job, which generally takes a full day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Have somewhere for us to park nearby if possible
- Let us know which floor the room is on
Getting a price
Upload a picture of the damage and a wider shot of the entire item, and tell us you are in Conington, and we will come back with a fixed quote.
Related advice
Conington and the surrounding area
Conington is about 4 miles south of Yaxley, in Cambridgeshire. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our technicians cover all 371 towns and villages across Cambridgeshire. Our jobs stretch from Conington to London (67 miles away).
Every address in PE7 is covered. From Church Road, Conington Lane and Bruces Close or a nearby road, we can come to you. Neighbouring places we cover include Glatton (1 mile west), Holme (2 miles north-east), Sawtry (2 miles south), Stilton (2 miles north) and Folksworth (3 miles north-west). Further out, we also cover Huntingdon (9 miles south-east), St Ives (12 miles south-east), Whittlesey (9 miles north-east), Chatteris (13 miles east), Godmanchester (11 miles south-east) and Yaxley (4 miles north).
Landmarks near Conington
Locally, our jobs take us to homes close to All Saints Church and Sawtry Village Academy. A little further out are Bruces Castle Farm (0.9 miles south-east). Not far away are Great Fen Project.
What affects the price in Conington
Prices start from £350. There’s no charge for travel to Conington. The price comes down to:
- Whether it’s a chip, crack, burn or wear
- The colour and finish to match
- Access to the area
- Any earlier repairs that need removing first
A repair generally costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.
Getting a price from pictures
Good photos mean an accurate price. Here’s what helps:
- Natural light rather than flash
- Any earlier repairs or coatings
- One sharp close-up of the damage
- Your postcode, so we can check dates
We price from pictures so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you’ll get a fixed figure back.
Common questions in Conington
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
How do I book?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Is it worth repairing rather than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Do you charge for travel?
There’s no separate call-out charge. Your fixed price includes everything.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
Do you work for landlords and businesses?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Cambridgeshire.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Will the new finish last?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Work for landlords and builders
Housing associations and facilities teams use us for planned and reactive repairs in Cambridgeshire and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Signs you need bath re-enamelling in Conington
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
These are the problems we’re asked about most:
- Chips and rust in more than one place
- Wear marks under the taps
- A coating lifting around the plughole
- Enamel that is lost its shine and feels rough
Comparing quotes
- What preparation is included
- If travel is included in the price
- How long the guarantee is and what it covers
- Who will actually do the work
Nearby places to Conington
More services for Conington
Repair or replace: which is better?
Replacing a cast iron bath is a big job: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Prices start from £350. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- We come to you, anywhere in the UK
- Fixed prices from your pictures
- Honest advice, even when it means no job
Take a look at our full price list or bath cost comparison.
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Materials and what they mean for the repair
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
About our accreditations · Every repair comes with a one-year guarantee.
