Cambridgeshire · England
Bath re-enamelling & resurfacing in Stilton, Cambridgeshire
Bath re-enamelling in and around Stilton: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- An outdated colour you’d like to change
- A dull, rough surface that will not come clean
Bath re-enamelling in Stilton, done in place
Resurfacing renews the entire surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We’re frequently asked to fix several chips and rust patches and a dull, rough surface that won’t come clean, across cast iron baths, acrylic baths and basins & shower trays.
You get a one-year guarantee, the same in Stilton as everywhere else we work.
- Location
- Stilton (PE7)
- Region
- Cambridgeshire
- Guarantee
- 12 months on all our work
- Quote
- From £350. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Stilton questions
Can landlords book you?
Yes, often. We can quote for several properties together and work between tenancies.
Will you leave a mess?
No. The work area is masked and covered, and we take our waste away with us.
What happens after I send photos?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Can pets and children be at home?
Just keep them out of the work area. We’ll tell you when the room can be used again.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Is there a smell?
Some odour is normal while we spray, so we ventilate the room. It fades as the coating cures.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
How it works
You don’t need to empty the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. It normally takes a full day, and you’re welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Ensure the room can be ventilated
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Read more
DIY repairs versus a professional job
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
How to care for the repair
After the repair has cured, a few habits help it last:
- Don’t use the bath until it has fully cured
- Do not leave bottles, razors or sponges standing on the surface
- A quick wipe after use keeps limescale away
- A dripping tap should be fixed promptly
The first few days matter most: let it cure fully, then use mild cleaners only. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, do not pick at it. Moisture gets underneath and makes it worse, so it’s better to have it stripped and redone.
What a repair can’t fix
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Leaks from fittings rather than the bath
- Holes rusted through the metal
If in doubt, send photos and we will say what we think.
Materials we work on in Stilton
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
Common problems we fix in Stilton
Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.
If you can see any of these, send us a picture:
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
- A roll-top that’s seen better days
- Several chips and rust patches
Comparing quotes
- How to care for the finish
- How changes to the job are handled
- The length of the guarantee and what it covers
- Whether they match the colour on site
Stilton and nearby
Stilton is about 6 miles south of Peterborough, in Cambridgeshire. We work in every kind of home, old or new, large or small, plus businesses and rented homes. We cover all 371 towns and villages across Cambridgeshire, from the larger towns to small villages. Our nearest city page is Birmingham, about 67 miles away.
We work across PE7 and the streets around it. Local streets include High Street, Apreece Way and Cooper Thornhill Road. We also cover the places around Stilton: Folksworth (1 mile west), Norman Cross (1 mile north), Morborne (1 mile north-west), Washingley (2 miles west) and Haddon (2 miles north-west). Further out, we also cover Huntingdon (12 miles south-east), St Ives (14 miles south-east), Whittlesey (9 miles north-east), Chatteris (14 miles east), Godmanchester (13 miles south-east) and Ramsey (8 miles east).
Landmarks near Stilton
Around Stilton, we work in homes near The Talbot Public House, Parish Church of St Mary and Stilton Church of England Primary Academy and the streets around them. A little further out are Bruces Castle Farm (3.3 miles south-east) and Peterborough District Hospital (6 miles north). Not far away are Hampton Nature Reserve and Orton Mere.
For landlords and businesses
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
We work for landlords, letting agents and housing providers in Stilton as well as homeowners. Repairing between tenancies keeps void periods short, and it usually costs far less than a refit.
Repair or replace in Stilton?
Replacing a bath can take several days across several trades. Resurfacing takes one technician and generally a day, and the bath is usable the day after. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your photos, so there are no surprises on the day.
Why us?
- CHAS and Constructionline accredited
- We come to you, anywhere in the UK
- No extra charge for your area
- Everything repaired in place
See our full price list or bath cost comparison.
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Towns and villages near Stilton
Also in Stilton
About our accreditations · Every repair comes with a one-year guarantee.
