Highland · Scotland
Bath re-enamelling & resurfacing in Conon Bridge, Highland
Full bath re-enamelling and resurfacing at your home in Conon Bridge, with a one-year guarantee on every repair.
- Resurfacing from £350
- A coating lifting around the plughole
- An original cast iron bath that needs restoring
How we handle bath re-enamelling in Conon Bridge
We do not move the bath, so the taps, tiles and plumbing aren’t touched. It generally takes one visit, with the bath ready to use the following day. If you are dealing with an outdated colour you’d like to change and chips and rust in more than one place, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Conon Bridge (IV7)
- County
- Highland
- Warranty
- One year on every repair
- Price
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How we price bath re-enamelling
Resurfacing from £350. We price every job individually. The main factors are:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
- The material
Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your pictures
It only takes a minute to photograph the damage, and it saves a visit. Try to send:
- Where you are, by postcode
- A coin beside the damage so we can judge size
- Any details about the material
- A photo taken from further back
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed quote, not a guess.
Keeping it looking good
How the surface is treated afterwards matters:
- Repair dripping taps early
- Never use suction bath mats
- Stick to gentle, non-abrasive cleaners
- Have chips seen to early
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.
Landlords, agents and businesses in Conon Bridge
For anyone letting property in or around Conon Bridge, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Places near Conon Bridge
Other services in Conon Bridge
Conon Bridge and nearby
Conon Bridge is about 10 miles north-west of Inverness, in Highland. Anywhere in IV7, we come to you. Conon Bridge is one of 253 places in Highland we cover.
Postcode districts we cover here: IV7. Jobs here include addresses on Station Road, High Street and Leanaig Road. You’ll find Conon Bridge on the A862 and B9162, so it’s easy for us to reach. If you are just outside Conon Bridge, we cover Maryburgh (1 mile north-west), Easter Kinkell (2 miles east), Dingwall (3 miles north), Muir of Ord (3 miles south) and Blairninich (4 miles north-west). Larger places within reach include Inverness (10 miles south-east), Cradlehall (12 miles south-east), Merkinch (9 miles south-east), Hilton (11 miles south-east), Alness (11 miles north-east) and Invergordon (13 miles north-east). For island and remote addresses, call first so we can plan the visit.
Near you in Conon Bridge
Our customers here include homes close to Conon Hotel and Dingwall Academy. Conon Bridge has its own railway station: Conon Bridge station. Nearby you’ll also find Ross Memorial Hospital (2.1 miles north) and Brahan Castle (2.2 miles west). Green spaces nearby include Loch Ussie and Tollie Red Kites RSPB Reserve.
DIY kit or professional repair?
If you’re set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is generally the cheaper route.
Repairing versus replacing in Conon Bridge
If you like your bathroom but not your bath’s surface, re-enamelling is the least disruptive fix. Nothing else is disturbed. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why choose Surface Doctor in Conon Bridge
- We leave the room as we found it
- Everything repaired in place
- Every repair guaranteed for a year
- We’ll tell you if it’s not worth repairing
Read our pricing and guide to resurfacing and replacement costs.
Your questions about bath re-enamelling in Conon Bridge
How do I get a price for bath re-enamelling in Conon Bridge?
Prices start from £350. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do I have to be there?
We need someone to let us in. You do not need to watch us work.
Will there be fumes?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
How soon can you come?
We’ll give you dates with your quote. Tell us if you need it done quickly.
What happens if you find more damage?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Can you make a coloured bath white?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Will there be a smell?
Some materials have a smell while they’re applied, so we ventilate the room. It clears as the materials cure.
Do you need bath re-enamelling in Conon Bridge?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and abrasive cleaners do the most damage.
The things clients generally mention when they call include:
- Thin, worn enamel in places
- A coloured bath you want in white
- Stains that will not shift
- A peeling or bubbling previous coating
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- What happens if the damage is worse than the photos show
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.
How the visit works
A typical visit goes like this: we arrive on time, protect everything around the work area, do the job and clear up. Allow a full day. Before we go, we’ll explain how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Tell us about any previous repairs or coatings
Getting a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed price.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
