Highland · Scotland

Bath Re-enamelling in Muir of Ord

Damaged bath in Muir of Ord? We repair it in place, match it on site and guarantee the work for a year.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Wear marks under the taps
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling in Muir of Ord

How we handle bath re-enamelling in Muir of Ord

We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Resurfacing them in place keeps the original bath. We regularly repair basins & shower trays, acrylic baths and Victorian roll-tops, and the jobs we see most are a bath in a colour that no longer suits and stains that won’t shift.

Whatever the size of the job, it’s backed by a one-year guarantee in Muir of Ord and across Highland.

Location
Muir of Ord (IV6)
County
Highland
Guarantee
One year on every repair
Quote
From £350. Free, fixed quote from pictures
Phone
0345 017 0787
Last updated
23 October 2026
Technician in a mask working on a freestanding roll-top bath

How it works

Here’s how a visit usually runs: we arrive at the agreed slot, sheet and mask the area around the job, do the job and clear up. Plan for most of the day. Before leaving, we tell you when it can be used and what to avoid for the first few days.

  1. We check the bath and agree the finish with you.
  2. Taps, tiles and the floor are masked off.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. The masking comes off, we tidy up and tell you when it can be used.

Getting ready for the visit

  • Clear the area around the damage
  • Tell us if there are stairs or a lift
  • Have a window or extractor fan available

Ask for a price

For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Related advice

What your bath is made of matters

Cast iron

Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.

Acrylic

We resurface acrylic baths as well, with a coating system suited to acrylic. The bath needs to be firm and well supported.

For landlords and businesses

Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.

Housing associations and facilities teams use us for planned and reactive repairs. A repair avoids taking out and refitting, which is easier on the people living there.

Our work in Muir of Ord

Muir of Ord is about 9 miles west of Inverness, in Highland. Our technicians come to homes and businesses in Muir of Ord and nearby villages, so nothing has to leave your home. Muir of Ord is one of 253 towns and villages in Highland where we work.

Our repair technicians cover all of IV6 and the streets around it. You will find streets such as Fairmuir Road, Seaforth Road and Burns Avenue. If you’re just outside Muir of Ord, we cover Windhill (1 mile south), Beauly (3 miles south), Conon Bridge (3 miles north), Kirkhill (3 miles south-east) and Marybank (4 miles north-west). Further out, we also cover Inverness (9 miles east), Cradlehall (12 miles east), Merkinch (8 miles east), Dingwall (6 miles north), Hilton (10 miles south-east) and Alness (14 miles north-east). If you’re somewhere remote, ring us first and we’ll plan the trip.

Around Muir of Ord

Typical jobs here are in homes near Gilchrist. Muir of Ord has its own railway station: Muir of Ord station. Well-known places in the area include Tarradale Castle (1.9 miles south-east) and Ross Memorial Hospital (5.4 miles north). Not far away are Loch nam Bonnach and Tollie Red Kites RSPB Reserve.

Map of Muir of Ord © OpenStreetMap contributors

Questions from Muir of Ord

Can you quote from pictures?

Nearly always. We only ask to see it in person if the photos cannot show what we need.

Do you do work for letting agents?

We do, regularly. We can quote for several properties together and work between tenancies.

Can you re-enamel a roll-top bath?

Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.

Is repairing better than replacing?

Normally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.

How long does re-enamelling last?

A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.

Can tenants book a repair?

We can work for tenants, landlords or agents. Get your landlord’s agreement first.

Does someone need to be in?

Someone needs to let us in and show us the job. You do not need to watch us work.

What happens after I send pictures?

We review the photos and send a fixed quote and the next dates we have.

Common problems we fix in Muir of Ord

Often the bath has just had decades of use. The body of the bath is normally perfectly sound.

Most people contact us when they notice one of these:

  • Stains that will not shift
  • A roll-top that is seen better days
  • Wear marks under the taps
  • A peeling or bubbling previous coating

What to look for in a quote

  • What prep work is covered
  • What aftercare is recommended
  • How changes to the job are handled
  • How the colour is matched

Choosing a repair company

Keeping it looking good

How the surface is treated afterwards matters. Here’s what we suggest:

  • Clean with a soft cloth and mild detergent
  • A dripping tap should be fixed promptly
  • Don’t let dyes or oils sit on the finish
  • Don’t leave bottles, razors or sponges standing on the surface

Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.

Rust spots on a worn bath get worse with time and make the job bigger. It’s simpler to resurface before they spread.

When we’d advise against a repair

A few problems are outside what a surface repair can do:

  • Plumbing leaks, which need a plumber
  • A poorly supported acrylic bath, until it’s firmed up
  • Problems we can’t see until an old finish comes off

Not sure? Send photos and we’ll give you a straight answer before you book.

Surfaces we repair

  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Cast iron baths
  • Victorian roll-tops

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.

How we price bath re-enamelling

Prices start from £350. We give every job a fixed quote from photos. These are the things that affect it:

  • The material
  • The colour and finish to match
  • How much damage there is
  • The type of damage

Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your photos

Good photos mean an accurate price. Here’s what we find most useful:

  • The postcode, so we can plan the visit
  • A clear, close picture of the problem area
  • A coin beside the damage so we can judge size
  • Whether it’s been repaired or coated before

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed quote without visiting.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.