Staffordshire · England
Bath re-enamelling & resurfacing in Cookshill, Staffordshire
Problem with your bath in Cookshill? We put it right where it is, match it on site and back it with a one-year guarantee.
- Resurfacing from £350
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
About our bath re-enamelling in Cookshill
We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Common call-outs are for brown or grey marks that don’t clean off and thin, worn enamel in places, in cast iron baths, pressed steel baths and acrylic baths.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Cookshill (ST11)
- County
- Staffordshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Should I try a DIY kit first?
Kits are cheap and easy to find, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Getting it right first time is usually cheaper.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
Signs you need bath re-enamelling in Cookshill
The gloss on enamel is thin, and abrasive cleaning slowly wears it away. Eventually the surface turns porous and stains.
People usually call us when they notice one of these:
- A coating lifting around the plughole
- Thin, worn enamel in places
- Chips and rust in more than one place
- Staining under the taps and around the waste
Questions to ask before you book
- How long it needs to cure
- How changes to the job are handled
- What protection goes down before work starts
- Who will actually do the work
Also near Cookshill
Also in Cookshill
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
Our work in Cookshill
Cookshill is about 4 miles south-east of Stoke-on-Trent, in Staffordshire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Cookshill is one of 512 towns and villages in Staffordshire we cover. Our nearest city page is Manchester, about 34 miles away.
Here we cover the ST11 postcode area. We regularly work on streets such as The Green, Mill Close and Caverswall Road and the roads around them. Other places close to Cookshill include Caverswall (1 mile south-east), Weston Coyney (1 mile west), Forsbrook (2 miles south-east), Dilhorne (2 miles east) and Blythe Bridge (2 miles south-east). Further out, we also cover Stafford (13 miles south), Newcastle-under-Lyme (7 miles west), Stone (7 miles south-west), Leek (8 miles north), Biddulph (10 miles north-west) and Alsager (12 miles north-west).
What’s near Cookshill
Locally, our jobs take us to homes close to St Peter's CofE (A) Primary School, Church of St Filomena (Roman Catholic) and Red House. The nearest railway station is Blythe Bridge station, roughly 1.6 miles south-east of the centre. Other landmarks nearby include Cheadle Hospital (3.8 miles east) and Beswick Museum (1.5 miles south-west). Open spaces near Cookshill include Hem Heath Woods.
When a repair is not the answer
We will not take on work that won’t last, so these are the limits:
- A metal bath with a through crack
- Steel that has corroded right through
- Anything hidden under an old coating, until we remove it
Send us pictures and we’ll tell you honestly before you book.
Surfaces we repair
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
How we price bath re-enamelling
Prices start from £350. There is no area surcharge for Cookshill. The price reflects:
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
- Whether old repairs or coatings need taking off
- How much damage there is
Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- Something in shot to show the size
- Whether it’s been repaired or coated before
- What it’s made of, if you know
- A close-up of the damage, in focus
Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and you’ll get a fixed price back. Quotes are free and you are under no obligation.
Landlord and trade work in Cookshill
If you manage property in Cookshill, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Your questions about bath re-enamelling in Cookshill
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Can you re-enamel a roll-top bath?
Yes, roll-tops are a big part of our work. The inside is resurfaced, and we can refinish the outside as well.
Does the bath have to be removed?
Not at all. We work on the bath in place, with the room masked and ventilated.
Is there any odour?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Do you do work for letting agents?
Yes, frequently. We can quote for several properties together and work between tenancies.
Can you repair something that is been repaired before?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
Is it worth repairing rather than replacing?
Generally, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Will the new finish last?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
Aftercare tips
After the repair has cured, a few habits help it last:
- A quick wipe after use keeps limescale away
- Leave the bath for the full curing time before using it
- Store bottles off the bath
- Repair dripping taps early
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Resurfacing sooner means less repair work first.
What we do, step by step
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and tidy away. Plan for the best part of a day from start to finish. Before leaving, we tell you how long to leave it and what to avoid for the first few days.
- We check the bath and agree the finish with you.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Clear the area around the damage
- Keep children and pets away from the room on the day
- Have a window or extractor fan available
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
