Staffordshire · England
Bath Re-enamelling for Alsager homes
Bath re-enamelling in Alsager without the cost of replacing. Get a fixed quote from your photos, then book a visit.
- Resurfacing from £350
- Lots of chips and rust spots
- A period or roll-top bath worth keeping
Bath re-enamelling in Alsager without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Our repair technicians work on acrylic baths, Victorian roll-tops and cast iron baths, and people most often call us about a coating lifting around the plughole and enamel that’s lost its shine and feels rough.
You’re covered after we leave: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Area
- Alsager (ST7)
- Region
- Staffordshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
What happens on the day
There is not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to the best part of a day.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
Before we arrive
- Tell us if there are stairs or a lift
- Let us know if it has been repaired before
- Open a window if you can
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Related advice
Signs you need bath re-enamelling in Alsager
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
The things customers typically mention when they call include:
- Enamel that is lost its shine and feels rough
- Chips and rust in more than one place
- An original cast iron bath that needs restoring
- Brown or grey marks that don’t clean off
Before booking anyone
- What aftercare is recommended
- When it can be used again
- Whether there are any call-out or travel charges
- How the colour is matched
Also near Alsager
Also in Alsager
For landlords and businesses
If you manage property in Alsager, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
Questions from Alsager
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
How long will the bath be out of use?
Generally a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
Is a repair better than a new one?
Typically, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
How soon can you come?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Does re-enamelling smell?
Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.
What affects the price in Alsager
Resurfacing from £350. Every quote is fixed and free. What we take into account:
- What the surface is made of
- Unusual colours or finishes
- How easy the damage is to reach
- The type of damage
Our prices are the same across the UK, so there’s no premium for Alsager. What changes the price is the job itself: how much damage, what it’s made of and how many items.
Getting a price from pictures
Two or three clear pictures are normally enough. Try to include:
- A clear, close picture of the problem area
- The postcode, so we can plan the visit
- Any earlier repairs or coatings
- Good light, ideally daylight, without flash glare
Email us pictures of the damage and a wider shot of the whole item, and tell us you’re in Alsager, and we will reply with a fixed price.
Aftercare tips
Looking after the surface is easy:
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
- Repair dripping taps early
- Keep toiletries on a shelf rather than in the bath
The first few days matter most: give it the full curing time, then clean it gently. After that, no abrasives and no suction mats.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed quote from your pictures, so there are no surprises on the day.
Why Alsager customers choose us
- Colours mixed by hand to suit your surface
- Technicians who travel to you, UK-wide
- A fixed quote before you book
- Every repair guaranteed for a year
Take a look at our full price list or guide to resurfacing and replacement costs.
Where we work around Alsager
Alsager is about 6 miles east of Crewe, in Staffordshire. We travel to homes and businesses in Alsager and the surrounding area, so nothing has to leave your home. Alsager is one of 512 places in Staffordshire we cover. Our nearest city page is Manchester, about 26 miles away.
Every address in ST7 is within our area. That includes homes on Station Road, Church Road and Green Drive. You will find Alsager on the A50 and A5011, so it’s easy for us to reach. If you’re just outside Alsager, we cover Radway Green (1 mile south-west), Oakhanger (2 miles south-west), Millend (2 miles south), Barthomley (2 miles south-west) and Park End (2 miles south). We also work in nearby towns such as Newcastle-under-Lyme (6 miles south-east), Longton (11 miles south-east), Stone (15 miles south-east), Leek (12 miles east), Biddulph (6 miles east) and Kidsgrove (3 miles east).
Landmarks near Alsager
Around Alsager, we work in homes near Alsager School, Alsager Highfields Community Primary School and Mere Inn and the streets around them. The nearest railway station is Alsager station, roughly 0.5 miles south-east of the centre. Further afield, we also cover the area around Englesea Brook Chapel and Museum of Primitive Methodism (3.6 miles south-west) and Mow Cop Castle (4.1 miles east). Open spaces near Alsager include Bignall Hill and Parrot's Drumble.
About our accreditations · Every repair comes with a one-year guarantee.
