Kent · England
Bath re-enamelling & resurfacing in Cop Street, Kent
Our technicians come to Cop Street for full bath re-enamelling and resurfacing. Everything is done in place, and the work is guaranteed.
- Resurfacing from £350
- A coating lifting around the plughole
- A bath that stays dull however much you clean it
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send pictures, as it can add time.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
Bath re-enamelling in Cop Street without replacing anything
If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. There is no removal, plumbing or tiling involved. Whether it’s stains that won’t shift and a coating lifting around the plughole, we can generally put it right, whatever the material.
Whatever the size of the job, you get the same one-year guarantee.
- Area
- Cop Street (CT3)
- Region
- Kent
- Guarantee
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How the visit works
On the day, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. The job normally takes the best part of a day. We clean up when we’re done and tell you when it’s ready to use.
- First we protect the bathroom and set up ventilation.
- We clean and degrease the bath and repair any chips or rust.
- We prepare the surface and apply a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can generally be used the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Get a quote
Send us photos of the damage and a wider shot of the whole item, with your CT3 postcode, and we’ll reply with a fixed price.
Advice
Landlord and trade work in Cop Street
We work for landlords, letting agents and housing providers in Cop Street as well as householders. Repairing between tenancies keeps void periods short, and it generally costs far less than a refit.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
Cop Street and the surrounding area
Cop Street is about 6 miles south-west of Ramsgate, in Kent. Jobs in Cop Street are booked in like any other job: a fixed quote from photos, then a visit to do the work. Cop Street is one of 922 places in Kent we cover. Our jobs stretch from Cop Street to London (61 miles away).
Jobs in CT3 are booked in the same way as anywhere else. Other places close to Cop Street include Weddington (1 mile south), Ash (1 mile south), Guilton (1 mile south-west), Coombe (1 mile south) and Durlock (1 mile south-west). Further out, we also cover Canterbury (9 miles west), Margate (8 miles north-east), Dover (11 miles south), Folkestone (15 miles south), Ramsgate (6 miles north-east) and Broadstairs (8 miles north-east).
Landmarks near Cop Street
Locally, our jobs take us to homes close to The Chequer Inn, Church of St Nicholas and Ash Cartwright and Kelsey Church of England Primary School, among other places. For rail, the closest station is Sandwich station, roughly 2.9 miles south-east. Further afield, we also cover the area around White Mill (2.1 miles east). Green spaces nearby include Monk's Wall nature reserve.
More services for Cop Street
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Steel often rusts by the plughole, so we pay close attention there.
Do you need bath re-enamelling in Cop Street?
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Get in touch if you’ve noticed any of these:
- Worn patches where water runs and sits
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
- An outdated colour you’d like to change
What your quote should include
- Aftercare advice
- If travel is included in the price
- Is the price fixed, and does it include VAT?
- Who turns up on the day
Prices and what affects them
Prices start from £350. There are no hourly rates or hidden extras. The price depends on:
- Whether we combine several jobs
- The material and finish
- How many areas need work
- Access to the area
The price depends on how much damage there is and what kind, what it’s made of and how many jobs we combine into one visit. You get a fixed quote from your pictures, so there are no surprises on the day.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- The postcode, so we can plan the visit
If you’re in Cop Street and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
How to look after the repair
A little care keeps the finish looking good. Our advice:
- Wipe the bath dry after use in hard water areas
- Have chips seen to early
- Clean with a soft cloth and mild detergent
- Store bottles off the bath
Wipe the bath dry after use where you can, especially in hard water areas, and rinse away any product left on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
Common questions in Cop Street
Is it safe with children and pets around?
Keep pets and children away from the work area on the day, so the repair isn’t disturbed while it cures.
How quickly can you book me in?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
How long is the bath unusable?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
Can you repair something that’s been repaired before?
Yes, regularly. Removing the old work can add time, and that’s in the quote.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Can you do more than one item on the same visit?
Of course, and it typically saves money. Just add the extra items to your photos and we will quote them together.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It fades as the coating cures.
Repair or replace in Cop Street?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
What you get with us
- Colour mixed on the day to match
- We come to you, anywhere in the UK
- Same prices wherever you are
- One visit for most repairs
Read our full price list or resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
