Worcestershire · England
Bath re-enamelling & resurfacing in Coppicegate, Worcestershire
Bath re-enamelling for Coppicegate, without a refit. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
How we handle bath re-enamelling in Coppicegate
When a bath is structurally fine but worn out on the surface, re-enamelling is generally the most cost-effective option. There’s no removal, plumbing or tiling involved. We are frequently asked to fix several chips and rust patches and an outdated colour you’d like to change, in Victorian roll-tops, acrylic baths and cast iron baths.
Whatever the size of the job, it’s backed by a one-year guarantee in Coppicegate and across Worcestershire.
- Area
- Coppicegate (DY12)
- Region
- Worcestershire
- Warranty
- One year on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
For landlords and businesses
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. We can visit several plots in one trip to keep costs down.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
Coppicegate and nearby
Coppicegate is about 6 miles west of Kidderminster, in Worcestershire. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Coppicegate is one of 376 towns and villages in Worcestershire we cover. You can also see our page for Birmingham, about 21 miles away.
Every address in DY12 is covered, from the main roads to the quietest streets. Neighbouring places we cover include Buttonoak (1 mile south), Upper Arley (2 miles east), Netherton (2 miles north), Stanley (2 miles north) and Nash End (2 miles north-east). Within a short drive, we also cover Kidderminster (6 miles east), Bromsgrove (15 miles south-east), Droitwich Spa (15 miles south-east), Stourport-on-Severn (7 miles south-east), Bewdley (4 miles south-east) and Chawson (14 miles south-east).
Near you in Coppicegate
Nearby you will also find Kidderminster Hospital and Treatment Centre (5.5 miles south-east) and Crundles Farm (3.5 miles south-east).
What we are called out for in Coppicegate
Hard water speeds up the wear, and abrasive cleaners do the most damage.
Customers typically contact us about:
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- An old resurfacing that’s failing
- A dull, rough surface that will not come clean
What to look for in a quote
- A fixed price, and whether VAT is included
- What aftercare is recommended
- What the guarantee covers, and for how long
- How your room will be protected
Questions from Coppicegate
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you cover the whole of Worcestershire?
The entire UK, including all of Worcestershire. Just include your postcode and we will confirm dates.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will you leave a mess?
Dust sheets and masking go down before we start, and tidy up before we leave.
How do I get a price for bath re-enamelling in Coppicegate?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Do you need to take the bath out?
No. We resurface it in place, so the tiles and taps stay put.
What happens once I’ve sent pictures?
We review the pictures and send a fixed quote.
How it works
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which typically takes a full day. If anything looks different from your pictures, we’ll talk to you before going ahead.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Plan for the room to be out of bounds to pets and children
- Ensure the area is dry
How to get a price
The quickest way to a price is to send two or three pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.
Related advice
Keeping it looking good
Once the work has cured, treat it gently:
- Have chips seen to early
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- Don’t leave bottles, razors or sponges standing on the surface
Use mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading and make the job bigger. Resurfacing before they spread keeps it simpler.
Different materials, different repairs
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that is the part we put right.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Should you replace it?
A refit takes several trades and several days. Re-enamelling takes one technician and generally one day, with the bath ready the following day. Our bath re-enamelling starts from £350. Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why Coppicegate customers choose us
- CHAS and Constructionline accredited
- Straight answers about what a repair can do
- We come to you, anywhere in the UK
- No need to remove anything
Take a look at our pricing or guide to resurfacing and replacement costs.
When a repair is not the answer
We won’t take on work that won’t last, so here’s what a repair cannot put right:
- Problems we can’t see until an old finish comes off
- Leaks from fittings rather than the bath
- A bath that’s rusted through
If in doubt, send pictures and we’ll say what we think before you book.
Materials we work on in Coppicegate
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
- Acrylic baths
- Victorian roll-tops
Nearby places to Coppicegate
Other services in Coppicegate
About our accreditations · Every repair comes with a one-year guarantee.
