Shropshire · England
Bath re-enamelling & resurfacing in Stanley, Shropshire
Full bath re-enamelling and resurfacing in Stanley, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that don’t clean off
- Lots of chips and rust spots
Stanley and the surrounding area
Stanley is about 6 miles north-west of Kidderminster, in Shropshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover 433 places in Shropshire, from the larger towns to small villages. We work right across the region, from Stanley to Birmingham (20 miles away).
Postcode districts we cover here: WV16. We also travel to Netherton (1 mile west), Highley (1 mile north-west), Alveley (1 mile north-east), Nash End (2 miles south-east) and Coppicegate (2 miles south). Larger places within reach include Madeley (14 miles north), Bridgnorth (7 miles north), Ludlow (15 miles west), Shifnal (15 miles north), Broseley (13 miles north) and Albrighton (14 miles north).
Near you in Stanley
Our customers here include homes close to Church of St Mary, The Ship Inn and Severn Valley Country Park and the streets around them. Nearby you will also find Glazeley Castle (4.3 miles north-west).
Bath re-enamelling in Stanley, done in place
After cleaning, repairing and priming, we spray on the new finish. Most of the work, and most of the durability, is in the preparation, so we do not cut corners on it. Our technicians work on acrylic baths, cast iron baths and pressed steel baths, and the jobs we see most are stains that won’t shift and chips and rust in more than one place.
You are covered for a year from the day of the repair. Just call us if there is a problem and we will come back.
- Area
- Stanley (WV16)
- Area hub
- Shropshire
- Cover
- A year, on every repair
- Price
- From £350. Free, fixed price from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Pressed steel
Pressed steel baths take a new finish well, once any rust has been treated. Steel frequently rusts by the plughole, so we check it carefully.
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Work for landlords and builders
Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Don’t leave a chip unrepaired
- Don’t leave bottles, razors or sponges standing on the surface
- Respect the curing time we give you
- Fix dripping taps quickly
A quick rinse and wipe after use helps, particularly where water is hard, so limescale cannot build up.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Towns and villages near Stanley
Also in Stanley
FAQs for Stanley
What does bath re-enamelling cost?
Prices start from £350. We give a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo and your postcode.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
Can landlords book you?
Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.
Can you change the colour of my bath?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Will the new finish last?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Can tenants book a repair?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
Do you need bath re-enamelling in Stanley?
Hard water speeds up the wear, and abrasive cleaners do the most damage.
You may need us if you’ve spotted any of these:
- An original cast iron bath that needs restoring
- An outdated colour you’d like to change
- Lots of chips and rust spots
- Thin, worn enamel in places
Questions to ask before booking
- Aftercare advice
- Whether a trained technician does the job
- How soon you can use it again
- How the room is protected while they work
Repairing versus replacing in Stanley
A replacement frequently means several trades over several days. Re-enamelling is one technician, typically one day, with the bath back in use the following day. Our bath re-enamelling starts from £350. What it costs depends on the type and amount of damage, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Why Stanley clients choose us
- Honest advice, even when it means no job
- One price list for the whole UK
- One visit for most repairs
- One-year guarantee on every repair
Take a look at our full price list or bath cost comparison.
What we do, step by step
Your technician turns up when we said we would and checks the damage against your photos first. Dust sheets and masking tape go down before any work starts. Most visits take most of the day, and the room is left clean and tidy.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures.
Getting ready for the visit
- Mention if the room is upstairs or in a flat
- Keep a parking space free if you can
- Plan for the room to be out of bounds to pets and children
Ask for a price
Pricing is simple: snap the damage close up and then the whole item, send them over with your postcode, and we will reply with a fixed quote. Quotes are free and no obligation.
Read more
Prices and what affects them
Resurfacing from £350. Each job gets its own fixed price. This is what makes a difference:
- How many areas need work
- How easy the damage is to reach
- What the surface is made of
- The type of damage
Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
It only takes a minute to photograph the damage, and it saves a visit. Please include:
- Any earlier repairs or coatings
- A clear, close picture of the problem area
- A coin or ruler next to the damage for scale
- Your postcode, so we can check dates
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price the same day in most cases.
About our accreditations · Every repair comes with a one-year guarantee.
