Worcestershire · England
Bath re-enamelling & resurfacing in Upper Arley, Worcestershire
Full bath re-enamelling and resurfacing for homes and businesses in Upper Arley and across Worcestershire. Free, fixed quotes from your pictures.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- A roll-top that’s seen better days
How we price bath re-enamelling
Prices start from £350. We charge the same across the UK, including Upper Arley. The price reflects:
- How much damage there is
- Whether it’s a chip, crack, burn or wear
- How many items we do on one visit
- Previous DIY repairs that have to come out
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Send pictures for a quote
A couple of clear pictures is all it takes. Try to include:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- Your postcode, so we can check dates
- Any earlier repairs or coatings
Pricing is simple: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed quote back. Quotes are free and no obligation.
Bath re-enamelling at your home in Upper Arley
Resurfacing renews the entire surface of the bath without a refit. It suits baths that are dull, stained, rough or chipped all over. If you are dealing with a coloured bath you want in white and lots of chips and rust spots, we can generally put it right, on cast iron baths, acrylic baths and Victorian roll-tops alike.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Upper Arley (DY12)
- County
- Worcestershire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
How it works
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Avoid using the area for a few hours before we arrive
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job the same day in most cases.
Advice
Landlords, agents and businesses in Upper Arley
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Also near Upper Arley
What else we do in Upper Arley
What we’re called out for in Upper Arley
A dull surface stains and holds dirt, and scrubbing it wears it down further. That’s the point where re-enamelling makes sense.
The most common problems we are called about are:
- A peeling or bubbling previous coating
- Staining under the taps and around the waste
- Thin, worn enamel in places
- A roll-top that’s seen better days
What your quote should include
- When it can be used again
- The length of the guarantee and what it covers
- How changes to the job are handled
- Whether they match the colour on site
Repair or replace: which is better?
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Re-enamelling avoids all of it. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access, and doing several items at once reduces it.
Why Upper Arley customers choose us
- CHAS, Constructionline and SafeContractor accredited
- Nothing taken out or refitted
- One price list for the whole UK
- We come to you, anywhere in the UK
See our pricing or bath cost comparison.
Upper Arley and nearby
Upper Arley is about 5 miles north-west of Kidderminster, in Worcestershire. Wherever you are in the DY12 postcode area, we carry out the work at your property. Upper Arley is one of 376 towns and villages in Worcestershire where we work. Our jobs stretch from Upper Arley to Birmingham (19 miles away).
Here we cover the DY12 postcode area. We also travel to Nash End (1 mile north), Good's Green (1 mile east), Coppicegate (2 miles west), Buttonoak (2 miles south-west) and Shatterford (2 miles north-east). Further out, we also cover Kidderminster (5 miles south-east), Bromsgrove (13 miles south-east), Droitwich Spa (14 miles south-east), Stourport-on-Severn (6 miles south-east), Bewdley (3 miles south) and Chawson (13 miles south-east).
Landmarks near Upper Arley
Around Upper Arley, we work in homes near Church of St Peter, Upper Arley CofE VC Primary School and The Harbour Inn, among other places. Nearby you’ll also find Crundles Farm (2.4 miles south-east) and Kidderminster Hospital and Treatment Centre (4.2 miles south-east). Green spaces nearby include Kinver Edge.
Questions from Upper Arley
What happens once I’ve sent pictures?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we’ll ask for another photo.
Can you quote from pictures?
Nearly always. We only ask to see it in person if the photos cannot show what we need.
Do you hold any accreditations?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
I’m a tenant. Can you help?
We are happy to deal with the tenant, landlord or agent. Get your landlord’s agreement first.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is there any odour?
Expect a mild smell while we are working that clears as it cures.
DIY kit or professional repair?
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
When a repair isn’t the answer
We’d rather lose a job than do one that won’t last, so these are the limits:
- Steel that has corroded right through
- Problems we can’t see until an old finish comes off
- A metal bath with a through crack
If in doubt, send photos and we’ll say what we think.
Materials we work on in Upper Arley
- Acrylic baths
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Respect the curing time we give you
- Repair dripping taps early
- Avoid suction-cup mats
- Stick to gentle, non-abrasive cleaners
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Repair dripping taps promptly.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
About our accreditations · Every repair comes with a one-year guarantee.
