North Yorkshire · England
Bath Re-enamelling in Copt Hewick
Damaged bath in Copt Hewick? We repair it in place, mix the colour on the day and guarantee the work for a year.
- Resurfacing from £350
- Thin, worn enamel in places
- A roll-top that is seen better days
Bath re-enamelling in Copt Hewick without replacing anything
Most baths are re-enamelled in a day, with the bath ready to use the following day. Nothing is disconnected or removed. Whether it’s lots of chips and rust spots and an old resurfacing that’s failing, we can help, on cast iron baths, basins & shower trays and Victorian roll-tops alike.
The work is guaranteed for twelve months. If something is not right in that time, we come back and put it right.
- Where
- Copt Hewick (HG4)
- Area hub
- North Yorkshire
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Covering Copt Hewick
Copt Hewick is about 2 miles east of Ripon, in North Yorkshire. Jobs in Copt Hewick are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. We cover all 626 towns and villages in North Yorkshire. You can also see our page for Leeds, about 23 miles away.
Postcode districts we cover here: HG4. We regularly work on streets such as Back Lane and Luncarr Lane and the roads around them. We also cover the places around Copt Hewick: Bridge Hewick (1 mile south), Marton-le-Moor (2 miles east), Skelton on Ure (2 miles south-east), Dishforth (3 miles north-east) and Melmerby (3 miles north). Further out, we also cover Harrogate (10 miles south), Knaresborough (9 miles south), Northallerton (14 miles north), Starbeck (10 miles south), Thirsk (9 miles north-east) and Bilton (9 miles south).
Local landmarks in Copt Hewick
Locally, our jobs take us to homes close to Black-a-Moor pub, Ripon Grammar School and Sharow Church of England Primary School, among other places. Well-known places in the area include Ripon Community Hospital (1.8 miles west) and The Courthouse Museum (1.6 miles west).
Also near Copt Hewick
More services for Copt Hewick
Keeping it looking good
Simple care helps the repair last. We recommend:
- Respect the curing time we give you
- Get any chip repaired quickly
- Stick to gentle, non-abrasive cleaners
- A dripping tap should be fixed promptly
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
Copt Hewick questions
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
Is a repair better than a new one?
Usually, when the rest is in good condition. A repair avoids removal and making good. We will tell you honestly if replacement makes more sense.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
What does bath re-enamelling cost?
Prices start from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
Will it make a mess?
We protect the room with dust sheets and masking first, and tidy up before we leave.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you repair several things at once?
Of course, and it usually saves money. Just add the extra items to your photos and you’ll get one combined price.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Should you replace it?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Our bath re-enamelling starts from £350. Compared with replacing, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
What you get with us
- No need to remove anything
- We leave the room as we found it
- CHAS and Constructionline accredited
- Work done at your home or business
See our prices page and guide to resurfacing and replacement costs.
Can I fix it myself?
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
Do you need bath re-enamelling in Copt Hewick?
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
Most people get in touch after spotting something like this:
- An old resurfacing that’s failing
- A bath that stays dull however much you clean it
- A roll-top that is seen better days
- Several chips and rust patches
Comparing quotes
- How soon you can use it again
- The length of the guarantee and what it covers
- A fixed quote, and whether VAT is included
- How your room will be protected
How we price bath re-enamelling
Prices start from £350. There is no charge for travel to Copt Hewick. The price depends on:
- How hard the colour is to match
- How many areas need work
- Whether old repairs or coatings need taking off
- The material and finish
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Send photos for a quote
Two or three clear pictures are generally enough. Try to include:
- A wider photo showing the whole bath
- Something in shot to show the size
- The material, if you know it
- Good light, ideally daylight, without flash glare
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you will get a fixed price back. Quotes are free and you’re under no obligation.
What a repair can’t fix
A repair is not right for every job, including:
- A cast iron or steel bath that’s cracked right through
- Leaking taps or wastes (a plumber’s job)
- A poorly supported acrylic bath, until it’s firmed up
Send us pictures and we will tell you honestly.
Surfaces we repair
- Cast iron baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
- Pressed steel baths
How the visit works
Visits start with a quick look at the job together. Next, we cover and mask everything nearby and we start. It normally takes a full day, and we will keep you posted as we go.
- We mask and protect the room and ventilate it.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Let the surface dry out before the visit
- Plan for the room to be out of bounds to pets and children
- Have somewhere for us to park nearby if possible
How to get a price
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job without visiting.
Read more
Work for landlords and builders
Builders use us to fix snagging damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit to keep costs down.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
