North Yorkshire · England
Bath re-enamelling & resurfacing in Melmerby, North Yorkshire
Problem with your bath in Melmerby? We put it right where it is, match it on site and guarantee the work for a year.
- Resurfacing from £350
- Wear marks under the taps
- A roll-top that is seen better days
Do you need bath re-enamelling in Melmerby?
Once enamel loses its gloss, it stains more easily, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Get in touch if you’ve noticed:
- Brown or grey marks that don’t clean off
- Several chips and rust patches
- Wear marks under the taps
- An old resurfacing that’s failing
Comparing quotes
- The length of the guarantee and what it covers
- What happens if they find more damage
- What preparation is included
- Whether they match the colour on site
Bath re-enamelling at your home in Melmerby
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, once the bath has been cleaned, repaired and prepared. Whether it’s an old resurfacing that’s failing and worn patches where water runs and sits, we can help, whatever the material.
Big or small, you get the same one-year guarantee in Melmerby and across North Yorkshire.
- Location
- Melmerby (HG4)
- County
- North Yorkshire
- Warranty
- A year, on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, using a system that bonds to acrylic. The bath needs to be firm and well supported for the finish to last.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
How the visit works
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we’re doing. Most jobs take most of the day, and you are welcome to carry on with your day while we work.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Before we arrive
- Let us know which floor the room is on
- Have somewhere for us to park nearby if possible
- Avoid using the area for a few hours before we arrive
Get a quote
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Towns and villages near Melmerby
Also in Melmerby
What affects the price in Melmerby
Prices start from £350. Prices are worked out job by job. What matters most is:
- How hard the colour is to match
- The size and number of damaged areas
- What the surface is made of
- Doing more than one item at once
We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
Photographing the damage takes a minute. Please include:
- A close-up of the damage, in focus
- A coin beside the damage so we can judge size
- The postcode, so we can plan the visit
- Natural light rather than flash
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Melmerby as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit to keep costs down.
Covering Melmerby
Melmerby is about 4 miles north-east of Ripon, in North Yorkshire. Book a date that suits you, and we will give you an arrival time in advance, so there’s no waiting around. Melmerby is one of 626 places in North Yorkshire where we work. We work right across the region, from Melmerby to Leeds (26 miles away).
Here we cover the HG4 postcode area. We regularly work on streets such as Witherick Lane, Melmerby Green Lane and Maple Garth. Other places close to Melmerby include Baldersby St James (2 miles east), Rainton (2 miles east), Copt Hewick (3 miles south), Dishforth (3 miles south-east) and Bridge Hewick (3 miles south). Within a short drive, we also cover Harrogate (13 miles south), Knaresborough (12 miles south), Ripon (4 miles south-west), Northallerton (11 miles north), Starbeck (13 miles south) and Thirsk (7 miles north-east).
Around Melmerby
Typical jobs here are in homes near Church of St Mary. Well-known places in the area include The Workhouse Museum (3.3 miles south-west) and Ripon Community Hospital (3.5 miles south-west).
Aftercare tips
So the finish stays in good condition for years:
- Avoid suction-cup mats
- Store bottles off the bath
- Don’t let dyes or oils sit on the finish
- Clean with a soft cloth and mild detergent
Stick to mild, non-abrasive cleaners, avoid suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
What we can’t put right
In fairness, some problems need a different fix:
- Leaks from fittings rather than the bath
- A poorly supported acrylic bath, until it’s firmed up
- A metal bath with a through crack
Not sure? Send photos and we’ll give you a straight answer before you book.
What we work on
- Cast iron baths
- Victorian roll-tops
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
Your questions about bath re-enamelling in Melmerby
Do you need to take the bath out?
Not at all. We work on the bath in place, with the room protected and ventilated.
What information do you need?
Photos of the damage, a picture of the whole bath and your postcode. After that, we just agree a date.
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders.
It’s been repaired before. Can you still fix it?
Usually, yes. The old repair comes out first, so let us know about it.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Do you resurface freestanding baths?
Yes. Inside and out if you’d like.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Is there a call-out fee?
Travel is included in the price, with the same prices everywhere we work.
About our accreditations · Every repair comes with a one-year guarantee.
