North Yorkshire · England
Bath Re-enamelling for Marton-le-Moor homes
We travel to Marton-le-Moor for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Several chips and rust patches
What we do, step by step
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes most of the day, and the room is left clean and tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- Several coats of finish are sprayed on, then it cures until the following day.
Preparing for the visit
- Point us to the nearest place to park
- Clear the area around the damage
- Mention if the room is upstairs or in a flat
Get a quote
Getting a price is easy: take a close-up of the damage and a picture from further back, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and no obligation.
Read more
Bath re-enamelling at your home in Marton-le-Moor
We re-enamel plenty of period and roll-top baths, which would be difficult and expensive to replace. Doing them in place keeps an original feature. Common call-outs are for an old resurfacing that’s failing and lots of chips and rust spots, on cast iron baths, acrylic baths and pressed steel baths.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Location
- Marton-le-Moor (HG4)
- Region
- North Yorkshire
- Guarantee
- One year on every repair
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Marton-le-Moor and the surrounding area
Marton-le-Moor is about 4 miles east of Ripon, in North Yorkshire. We agree a date that works for you, and we will give you an arrival time in advance, so you’re not left waiting in all day. Marton-le-Moor is one of 626 towns and villages in North Yorkshire we cover. You can also see our page for Leeds, about 23 miles away.
Every address in HG4 is within our area, from the main roads to the quietest streets. From Marton Meadow, Cana Lane and Whitegate Lane or anywhere nearby, a technician can come to you. Neighbouring places we cover include Skelton on Ure (2 miles south-west), Dishforth (2 miles north-east), Kirby Hill (2 miles south-east), Copt Hewick (2 miles west) and Bridge Hewick (2 miles west). We also work in nearby towns such as Harrogate (10 miles south-west), Knaresborough (9 miles south), Ripon (4 miles west), Northallerton (14 miles north), Starbeck (10 miles south) and Thirsk (8 miles north-east).
Landmarks near Marton-le-Moor
Locally, our jobs take us to homes close to Marton Church and the streets around them. Other landmarks nearby include Ripon Community Hospital (3.8 miles west) and Hutton Conyers Castle (3.3 miles north-west).
Repairs by material
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
For landlords and businesses
We work for landlords, letting agents and housing providers in Marton-le-Moor as well as homeowners. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We’re CHAS, Constructionline and SafeContractor accredited.
When to call us in Marton-le-Moor
Many baths we resurface have simply been well used. The body of the bath is usually perfectly sound.
Typical reasons for a call-out include:
- A bath that stays dull however much you clean it
- A peeling or bubbling previous coating
- A roll-top that is seen better days
- Thin, worn enamel in places
Comparing quotes
- How the room is protected while they work
- Whether cleaning and preparation are in the price
- When it can be used again
- What the guarantee covers, and for how long
When a repair is not the answer
Some problems need a builder, plumber or fitter rather than us:
- Leaking taps or wastes (a plumber’s job)
- Steel that has corroded right through
- A poorly supported acrylic bath, until it’s firmed up
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Cast iron baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
Towns and villages near Marton-le-Moor
Other services in Marton-le-Moor
Marton-le-Moor: your questions answered
Do you work in Marton-le-Moor?
Yes. We work across the UK and travel to Marton-le-Moor. Send photos and we’ll quote, or call 0345 017 0787.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Will the bath be moved?
No, it stays where it is. We work on the bath in place, with the room masked and ventilated.
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you change the colour of my bath?
Yes. We can resurface a coloured bath in white, and we can do the rest of the suite as well.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across North Yorkshire.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Repairing versus replacing in Marton-le-Moor
For a sound bath, resurfacing costs far less than replacement, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Resurfacing from £350, with every job priced individually. What it costs depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. We give a fixed price from your photos, so there are no surprises on the day.
Why us?
- We leave the room as we found it
- Fixed prices from your photos
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
Take a look at our full price list or bath cost comparison.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What affects the price in Marton-le-Moor
Prices start from £350. We don’t charge extra for travel to Marton-le-Moor. The price comes down to:
- What kind of damage it is
- Where the damage is and how we get to it
- How much damage there is
- How many items we do on one visit
There are no surprise extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
You can take the photos on your phone. Just make sure we can see:
- The postcode, so we can plan the visit
- A coin beside the damage so we can judge size
- Any details about the material
- A picture taken from further back
If you’re in Marton-le-Moor and want a price, the easiest route is pictures: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
About our accreditations · Every repair comes with a one-year guarantee.
