Hampshire · England
Bath Repair for Corhampton homes
Our technicians come to Corhampton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
Common questions in Corhampton
When can I have a bath again?
Most baths can be used the day after. We confirm the time before we leave.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can I add another job to the visit?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Can landlords book you?
Yes. We work for landlords, agents, builders and businesses as well as householders across Hampshire.
Can you match an avocado or pink bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Bath repair at your home in Corhampton
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place. Our technicians work on acrylic, roll-top & freestanding and cast iron enamel, and people most frequently call us about scuffs and scratches in the surface and an old repair that has yellowed or come loose.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before booking.
- Area
- Corhampton (SO32)
- Area hub
- Hampshire
- Cover
- 12 months on all our work
- Price
- From £95. Free and fixed, from your pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
The process
You don’t need to empty the room. We bring everything we need with us, put protection down and get going once we’ve agreed what we are doing. It normally takes a few hours, depending on the damage, and you’re welcome to carry on with your day while we work.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- Finish coats go on, then the repair is polished to blend in.
- The repair is left to cure, and most baths can be used the following day.
Before we arrive
- Tell us if there are stairs or a lift
- Point us to the nearest place to park
- Let us know about parking or access
How to get a price
To get a price, send two or three photos through our quote form or call us. We’ll say straight away if a repair is the right fix.
Read more
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and do not use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
Repair or replace in Corhampton?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
Why book with us
- CHAS and Constructionline accredited
- Every repair guaranteed for a year
- Most jobs done in one visit
- Work done at your home or business
Take a look at our full price list and resurfacing vs replacement cost guide.
Nearby places to Corhampton
What else we do in Corhampton
Signs you need bath repair in Corhampton
A bath gets knocked about more than you’d think: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Over time, chips and rust spots are almost inevitable.
These are the problems we are asked about most:
- Chips on the rim or sides
- Damage done while the bathroom was being fitted
- A kit repair that didn’t last
- Rust spots around the plughole
Comparing quotes
- Whether they match the colour on site
- What prep work is covered
- How the room is protected while they work
- How to care for the finish
When we’d advise against a repair
We won’t take on work that will not last, so these are the limits:
- Cracks in acrylic we cannot reach from underneath
- A steel bath rusted through
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Send us pictures and we will tell you honestly before you book.
Materials we work on in Corhampton
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
How to look after the repair
After the repair has cured, a few habits help it last:
- Don’t leave a fresh chip for long
- Get a dripping tap fixed promptly
- Cover the bath during DIY or decorating
- If an acrylic bath flexes, have its feet adjusted
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Stop using the bath if a crack lets water through. Water under the bath can damage the floor and the ceiling below.
Materials and what they mean for the repair
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.
Our work in Corhampton
Corhampton is about 7 miles north-west of Horndean, in Hampshire. Wherever you are in the SO32 postcode area, a technician comes to you. We work in 683 places across Hampshire. We work right across the region, from Corhampton to London (57 miles away).
All of SO32 is within our area, from the main roads to the quietest streets. From De Port Heights, Warnford Road and Millside or anywhere nearby, a technician can come to you. We also cover the places around Corhampton: Exton (1 mile north), Meonstoke (1 mile south), Brockbridge (1 mile south), Droxford (1 mile south) and Soberton (2 miles south). We also work in nearby towns such as Winchester (10 miles north-west), Gosport (12 miles south), Havant (10 miles south-east), Eastleigh (9 miles west), Fareham (9 miles south) and Horndean (7 miles south-east).
What’s near Corhampton
We visit homes around Meonstoke Church of England Infant School, The Shoe Inn and Corhampton Church and the streets around them. Open spaces near Corhampton include Beacon Hill and St Clair's Meadow.
Landlords, agents and businesses in Corhampton
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
About our accreditations · Every repair comes with a one-year guarantee.
