Kent · England
Bath Re-enamelling for Coursehorn homes
Bath re-enamelling in Coursehorn without the cost of replacing. Send us pictures for a fixed price, then we come to you.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Bath re-enamelling in Coursehorn, done in place
When a bath is structurally fine but worn out on the surface, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. Typical jobs include a bath in a colour that no longer suits and chips and rust in more than one place, in cast iron baths, acrylic baths and basins & shower trays.
You get a one-year guarantee, the same in Coursehorn as everywhere else we work.
- Area
- Coursehorn (TN17)
- Area hub
- Kent
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY repairs versus a professional job
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
What we cannot put right
A repair is not always the answer, and we’ll tell you before we start. We can’t fix:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A cast iron or steel bath that is cracked right through
Send us photos and we’ll tell you honestly before booking.
Materials we work on in Coursehorn
- Pressed steel baths
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Basins & shower trays
Looking after it afterwards
Much of the damage we repair could have been avoided. A few tips:
- Keep suction mats out of the bath
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
- Don’t leave bottles, razors or sponges standing on the surface
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface and makes resurfacing more work.
Do you need bath re-enamelling in Coursehorn?
Enamel doesn’t fail overnight. Abrasive cleaners, limescale and years of use wear the gloss away, starting where water runs and sits.
People usually call us after spotting one of these:
- A period or roll-top bath worth keeping
- Stains that will not shift
- Several chips and rust patches
- Worn patches where water runs and sits
Questions to ask before you book
- Who will actually do the work
- If travel is included in the price
- Whether the colour is mixed to match
- Whether the price is fixed and includes VAT
Landlord and trade work in Coursehorn
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We will fit around changeovers where we can.
Towns and villages near Coursehorn
What else we do in Coursehorn
How it works
We agree an arrival time beforehand, so you are not left guessing. On site, it takes a full day for most jobs. The room is left tidy and you will know when it can be used.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can usually be used the next day.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us if there are stairs or a lift
- Make sure the area is dry
Get a quote
A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Read more
About Coursehorn
Coursehorn is about 12 miles south of Maidstone, in Kent. We visit clients in Coursehorn and the surrounding area, so you do not need to take anything anywhere. Coursehorn is one of 922 towns and villages in Kent we cover. Our nearest city page is London, about 40 miles away.
We cover every part of TN17. Close by, we cover Baker's Cross (1 mile west), Cranbrook (1 mile west), Swattenden (1 mile south-west), Hartley (2 miles south-west) and Benenden (2 miles south-east). Further out, we also cover Maidstone (12 miles north), Ashford (14 miles east), Royal Tunbridge Wells (13 miles west), Tonbridge (14 miles north-west), Kings Hill (14 miles north-west) and Foley Park (13 miles north).
Near you in Coursehorn
Typical jobs here are in homes near Cranbrook School, Cranbrook Church of England Primary School and Church of St Dunstan, among other places. Also close by are White Horse pub (0.8 miles west) and Crane Valley (1 mile west). A little further out are Sissinghurst Castle (1.7 miles north-east) and Sissinghurst Castle (1.7 miles north-east).
Repairs by material
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Prices and what affects them
Prices start from £350. We price every job individually, from your pictures. The main factors are:
- Previous DIY repairs that have to come out
- Whether it’s a chip, crack, burn or wear
- The material
- How easy the damage is to reach
The price depends on how much damage there is and what kind, the material and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
Quotes from your photos
Good photos mean an accurate price. Here’s what we find most useful:
- Good light, ideally daylight, without flash glare
- One sharp close-up of the damage
- Where you are, by postcode
- Whether it’s been repaired or coated before
Pricing is simple: take a close-up of the damage and a picture from further back, send them over with your postcode, and we’ll reply with a fixed price. Quotes are free and no obligation.
Your questions about bath re-enamelling in Coursehorn
Does the bath have to be removed?
No. We resurface it in place, so the tiles and taps stay put.
Do you cover Coursehorn?
Yes. We cover the entire UK and travel to Coursehorn. Send pictures and we’ll quote, or call 0345 017 0787.
How much does bath re-enamelling cost in Coursehorn?
Prices start from £350. Every job gets a fixed price based on photos of the damage. Send a close-up of the damage and a wider photo with your TN17 postcode.
Which areas do you work in?
We cover the entire UK, including Coursehorn and the rest of Kent. Send your postcode with your photos and we’ll confirm dates.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Can landlords book you?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Kent.
Can you make a coloured bath white?
Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
About our accreditations · Every repair comes with a one-year guarantee.
