Kent · England

Bath Re-enamelling for Baker's Cross homes

Our repair technicians come to Baker's Cross for full bath re-enamelling and resurfacing. Nothing is taken out, and the work is guaranteed.

  • Resurfacing from £350
  • Stains that will not shift
  • A dull, rough surface that will not come clean
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Baker's Cross

Bath re-enamelling in Baker's Cross, done in place

After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Whether it’s staining under the taps and around the waste and a peeling or bubbling previous coating, we can help, whatever the material.

You are covered for a year from the day of the repair. If anything isn’t right, ring us and we’ll sort it.

Location
Baker's Cross (TN17, TN18)
Region
Kent
Warranty
One year on every repair
Quotes
From £350. Free and fixed, from your pictures
Telephone
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

How the visit works

Visits start with a quick look at the job together, so you know exactly what we are doing. After that, protection goes down around the work area and the work begins. You can expect it to take the best part of a day, and we’ll keep you posted as we go.

  1. The bathroom is protected and ventilation set up.
  2. We remove the old silicone and deep clean the bath.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. The new finish is sprayed on in several coats and left to cure until the day after.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Tell us if there are stairs or a lift
  • Keep a parking space free if you can

How to get a price

Most clients in Baker's Cross get their price from pictures. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.

Send photos for a quote

Advice

When we would advise against a repair

In fairness, some problems need a different fix:

  • A cast iron or steel bath that’s cracked right through
  • Leaks from fittings rather than the bath
  • A poorly supported acrylic bath, until it’s firmed up

If in doubt, send photos and we’ll say what we think before booking.

Materials we work on in Baker's Cross

  • Basins & shower trays
  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths
  • Acrylic baths

Aftercare tips

How the surface is treated afterwards matters:

  • Never use suction bath mats
  • A quick wipe after use keeps limescale away
  • Leave the bath for the full curing time before using it
  • Do not let dyes or oils sit on the finish

Use mild, non-abrasive cleaners, do not use suction bath mats, and keep bottles and razors off the surface.

Worn enamel only gets rougher with time, and rust spots spread under the surface. Resurfacing sooner means less repair work first.

Should you replace it?

A new bath means a plumber, lifting out the old bath, re-tiling or making good the walls and several days without a working bathroom. Resurfacing gives the bath a new finish with the bath left where it is. Our bath re-enamelling starts from £350. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.

What you get with us

  • Straight answers about what a repair can do
  • Every repair guaranteed for a year
  • Technicians who travel to you, UK-wide
  • No extra charge for your area

Read our prices page or resurfacing vs replacement cost guide.

DIY repairs versus a professional job

If you are set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Materials and what they mean for the repair

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.

Acrylic

Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.

Our work in Baker's Cross

Baker's Cross is about 9 miles south-east of Paddock Wood, in Kent. Wherever you are in the TN17 postcode area, we come to you. Baker's Cross is one of 922 towns and villages in Kent where we work. You can also see our page for London, about 39 miles away.

Here we cover the TN17 and TN18 postcode area. Streets in the area include Dorothy Avenue, Brickenden Road and Doctor Hope's Road, all of which we cover. We also cover the places around Baker's Cross: Cranbrook (1 mile west), Coursehorn (1 mile east), Swattenden (1 mile south-west), Hartley (2 miles south-west) and Benenden (2 miles south-east). Further out, we also cover Maidstone (12 miles north), Ashford (14 miles east), Royal Tunbridge Wells (12 miles west), Tonbridge (14 miles north-west), Kings Hill (14 miles north-west) and Foley Park (13 miles north).

Around Baker's Cross

In Baker's Cross, that means homes near Cranbrook School, Crane Valley and Church of St Dunstan. Also close by are White Horse pub (within half a mile north-west) and Cranbrook Church of England Primary School (0.5 miles north-west). Well-known places in the area include Sissinghurst Castle (2.3 miles north-east) and Sissinghurst Castle (2.3 miles north-east).

Map of Baker's Cross © OpenStreetMap contributors

Baker's Cross questions

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Can you repair several things at once?

Yes, and it’s frequently cheaper. Send pictures of everything together and we will quote them together.

It’s been repaired before. Can you still fix it?

Yes, regularly. It can add a little time, which we include in the quote.

How long does re-enamelling last?

It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

Do you come to Baker's Cross?

Yes. We work across the UK and travel to Baker's Cross. Send pictures and we’ll quote, or call 0345 017 0787.

Is it worth repairing rather than replacing?

Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. If it is not worth repairing, we will tell you.

Do you work for landlords and businesses?

Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses across Kent.

Do you resurface freestanding baths?

Yes. Inside and out if you’d like.

Common problems we fix in Baker's Cross

Hard water speeds up the wear, and gritty cleaners are the worst culprits.

If you can see any of these, send us a picture:

  • An outdated colour you’d like to change
  • A roll-top that’s seen better days
  • Chips and rust in more than one place
  • Brown or grey marks that don’t clean off

What to look for in a quote

  • Aftercare advice
  • How long it needs to cure
  • What the guarantee covers, and for how long
  • If travel is included in the price

Choosing a repair company

Landlord and trade work in Baker's Cross

We work for landlords, letting agents and housing providers in Baker's Cross as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Hospitality businesses can’t afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.