Kent · England
Bath Re-enamelling in Benenden
We travel to Benenden for full bath re-enamelling and resurfacing. Nothing is taken out, with a one-year guarantee.
- Resurfacing from £350
- Thin, worn enamel in places
- A peeling or bubbling previous coating
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Pressed steel
Steel baths re-enamel well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
About our bath re-enamelling in Benenden
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the whole bath is tired rather than one spot. Our technicians work on pressed steel baths, Victorian roll-tops and basins & shower trays, and the jobs we see most are a coating lifting around the plughole and enamel that’s lost its shine and feels rough.
Every job is backed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Where
- Benenden (TN17)
- Region
- Kent
- Cover
- 12 months on all our work
- Price
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
What we’re called out for in Benenden
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- A period or roll-top bath worth keeping
- A bath in a colour that no longer suits
- Staining under the taps and around the waste
- A peeling or bubbling previous coating
Questions to ask before you book
- Whether they match the colour on site
- How long it needs to cure
- What protection goes down before work starts
- What prep work is covered
Landlords, agents and businesses in Benenden
Landlords, letting agents and housing providers in Benenden use us as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Housing associations and facilities teams use us for planned and reactive repairs in Kent and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.
Common questions in Benenden
When can you do it?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Will there be a smell?
It depends on the job, but frequently a little. Ventilation keeps it to a minimum.
How long does re-enamelling take?
Most baths are done in a day and can be used the day after. We give you timings with the quote.
Can you quote from pictures?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Can you re-enamel a roll-top bath?
Yes. We can do the inside and outside if you’d like.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Can you change the colour of my bath?
Yes, most people go for white. Tell us what you’d like when you ask for a quote.
Is there a guarantee?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Prices and what affects them
Resurfacing from £350. We do not charge extra for travel to Benenden. The price depends on:
- The material
- Any earlier repairs that need removing first
- Access to the area
- Whether we combine several jobs
The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. We give a fixed quote from your pictures, so you know the cost before you book.
How to get a fixed quote
Good pictures mean an accurate price. Here’s what helps:
- A close-up of the damage, in focus
- The material, if you know it
- A coin or ruler next to the damage for scale
- The postcode, so we can plan the visit
No survey visit is needed: we price from photos. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
About Benenden
Benenden is about 13 miles west of Ashford, in Kent. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Benenden is one of 922 towns and villages in Kent we cover. Our nearest city page is London, about 42 miles away.
Here we cover the TN17 postcode area. Jobs here include addresses on The Street, Hortons Close and Iden Green Road and the roads around them. Benenden sits on or near the B2086, which makes travel easy. Other places close to Benenden include Iden Green (1 mile south), Coursehorn (2 miles north-west), Baker's Cross (2 miles north-west), Swattenden (2 miles north-west) and Cranbrook (3 miles north-west). Within a short drive, we also cover Maidstone (14 miles north), Ashford (13 miles east), Royal Tunbridge Wells (14 miles west), Foley Park (15 miles north), Paddock Wood (11 miles north-west) and Tenterden (5 miles east).
What’s near Benenden
In Benenden, that means homes near King William IV Public House, Church of St George and Benenden Church of England Primary School, among other places. A little further out are Mervyn Quinlan Museum (2 miles north-east) and Sissinghurst Castle (3.2 miles north).
Should you replace it?
Replacing a cast iron bath is a big job: they’re heavy, often need breaking up, and a new one isn’t cheap. Re-enamelling avoids all of it. Our bath re-enamelling starts from £350. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Send pictures and we’ll give you the exact figure.
Why Benenden clients choose us
- No need to remove anything
- Technicians who travel to you, UK-wide
- Most jobs done in one visit
- Fixed prices from your pictures
Read our full price list and resurfacing vs replacement cost guide.
Towns and villages near Benenden
Other services in Benenden
The process
A typical visit goes like this: we arrive at the agreed slot, sheet and mask the area around the job, carry out the work and clear up. Plan for most of the day. Before we go, we will explain when it can be used and what to avoid for the first few days.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Let us know if it has been repaired before
- Let us know which floor the room is on
Ask for a price
Email us pictures of the damage and one of the whole item, with your TN17 postcode, and we’ll come back with a fixed quote.
Advice
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
How to look after the repair
After the repair has cured, a few habits help it last:
- Get any chip repaired quickly
- A quick wipe after use keeps limescale away
- Don’t leave bottles, razors or sponges standing on the surface
- Repair dripping taps early
Dry the bath after use if possible, and rinse off any bath products.
Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.
About our accreditations · Every repair comes with a one-year guarantee.
