Southend-on-Sea · England
Bath Re-enamelling in Courtsend
Full bath re-enamelling and resurfacing at your home in Courtsend, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath that stays dull however much you clean it
- Thin, worn enamel in places
Landlords, agents and businesses in Courtsend
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
Bath re-enamelling in Courtsend without replacing anything
The bath stays where it is, so your taps, tiles and plumbing are left alone. It typically takes one visit, with the bath ready to use the following day. Typical jobs include wear marks under the taps and stains that won’t shift, on pressed steel baths, cast iron baths and basins & shower trays.
Every job is backed for twelve months, and the guarantee is the same wherever you live. We return to put right any problem with the work.
- Location
- Courtsend (SS3)
- Region
- Southend-on-Sea
- Cover
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Different materials, different repairs
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is the part we put right.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Courtsend and the surrounding area
Courtsend is about 8 miles north-east of Shoeburyness, in Southend-on-Sea. We agree a date that works for you, and we will give you an arrival time in advance, so you are not left waiting in all day. We work in all 16 towns and villages across Southend-on-Sea. Our nearest city page is London, about 44 miles away.
Here we cover the SS3 postcode area. Close by, we cover Paglesham Eastend (5 miles west), Burnham-on-Crouch (5 miles north-west), Stoneyhills (5 miles north-west), Dengie (6 miles north-west) and Paglesham (6 miles west). Within a short drive, we also cover Southend-on-Sea (10 miles west), Prittlewell (10 miles west), Shoeburyness (8 miles south-west), Leigh-on-Sea (12 miles west), North Shoebury (8 miles south-west) and Westcliff-on-Sea (11 miles south-west).
What’s near Courtsend
Green spaces nearby include Wallasea Wetlands.
Prices and what affects them
Prices start from £350. We price every job individually, from your photos. The main factors are:
- How much damage there is
- How many items we do on one visit
- Previous DIY repairs that have to come out
- Access to the area
Set against the cost of replacement, a repair is generally a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
Getting a price from pictures
Phone photos are fine, there’s no need for anything special. Just make sure we can see:
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
- A photo taken from further back
- Where you are, by postcode
You don’t need a survey visit. Nearly every job can be priced from pictures: send a close-up, a wider shot and your postcode, and we will come back to you with a fixed figure.
Repairing versus replacing in Courtsend
Getting a cast iron bath out is hard work: it’s very heavy, may need breaking up, and the replacement can be costly. Resurfacing in place avoids that entirely. Resurfacing from £350, with every job priced individually. Every job is a little different, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why choose Surface Doctor in Courtsend
- Normally one visit, start to finish
- A year’s guarantee on all work
- Repair technicians who travel to you, UK-wide
- No extra charge for your area
See our full price list and guide to resurfacing and replacement costs.
Questions from Courtsend
How do I book?
Some photos, your postcode and how to reach you. On the day, access to the room.
Do you work in Courtsend?
Yes. We work across the UK and come to Courtsend and the rest of Southend-on-Sea. Send photos and we’ll quote, or call 0345 017 0787.
Does someone need to be in?
Someone needs to let us in and show us the job. You don’t need to watch us work.
What does bath re-enamelling cost?
Resurfacing from £350. Because every job differs, we price from photos. You know the full cost before anything is booked.
I rent my home. Can I book you?
Of course. Check with your landlord; we can send the quote to them too.
Can you do the outside of a roll-top?
Yes. Inside and out if you’d like.
Are you a vetted contractor?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you quote from photos?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
How the visit works
Your technician turns up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes the best part of a day, and the room is left clean and tidy.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- The masking comes off, we tidy up and tell you when it can be used.
How to prepare
- Let the surface dry out before the visit
- Let us know which floor the room is on
- Make sure the room can be ventilated
How to get a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Towns and villages near Courtsend
Other services in Courtsend
When a repair isn’t the answer
It helps to know what we can’t do:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- Holes rusted through the metal
Send us pictures and we’ll tell you honestly.
Surfaces we repair
- Pressed steel baths
- Cast iron baths
- Basins & shower trays
- Victorian roll-tops
- Acrylic baths
Looking after it afterwards
Most damage we see is avoidable. These habits help:
- Stick to gentle, non-abrasive cleaners
- Don’t leave a chip unrepaired
- Fix dripping taps quickly
- Leave the bath for the full curing time before using it
Rinse the bath and wipe it over after use, particularly where water is hard, to stop limescale building up.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
About our accreditations · Every repair comes with a one-year guarantee.
