Somerset · England
Bath re-enamelling & resurfacing in Cranmore, Somerset
Full bath re-enamelling and resurfacing in Cranmore, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Lots of chips and rust spots
- Staining under the taps and around the waste
Bath re-enamelling in Cranmore, done in place
The bath stays where it is, so the taps, tiles and plumbing are not touched. It typically takes one visit, and can be used again the day after. If you’re dealing with chips and rust in more than one place and a coloured bath you want in white, we can help, on cast iron baths, acrylic baths and pressed steel baths alike.
You are covered for a year from the day of the repair. If anything is not right, ring us and we will come back.
- Location
- Cranmore (BA4)
- Area hub
- Somerset
- Cover
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
The process
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job normally takes the best part of a day. We clean up when we’re done and let you know when you can use it again.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- We prepare the surface and apply a bonding primer.
- Several coats of new finish are sprayed on.
- Once cured, normally by the following day, the bath is ready.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Let us know which floor the room is on
Ask for a price
Send us pictures of the damage and one of the entire item, with your BA4 postcode, and we will come back with a fixed quote.
Advice
DIY kit or professional repair?
Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
If you do try a kit, read the instructions carefully, ensure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
Should you replace it?
There are times replacing is better: a cracked-through bath, a change of size or shape, or a full refit. Otherwise, resurfacing generally wins. Resurfacing from £350, with every job priced individually. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
What you get with us
- Honest advice, even when it means no job
- One price list for the whole UK
- Work done at your home or business
- One visit for most repairs
Take a look at our prices page and bath cost comparison.
Towns and villages near Cranmore
More services for Cranmore
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair won’t do:
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
- Steel that has corroded right through
If in doubt, send pictures and we will say what we think before you book.
Materials we repair
- Pressed steel baths
- Victorian roll-tops
- Acrylic baths
- Cast iron baths
- Basins & shower trays
Common questions in Cranmore
How long does re-enamelling last?
Care for it and it lasts. Gentle cleaning, no suction mats.
When can you do it?
We will give you dates with your quote. Tell us if you need it done quickly.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as homeowners.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
What do you need from me?
Send photos through the quote form or call 0345 017 0787, and we’ll do the rest.
Can you repair something that is been repaired before?
In most cases. The old repair comes out first.
Is there a call-out fee?
There is no separate call-out charge. The fixed quote covers the visit and the work.
What happens next?
We look at the pictures and reply with a fixed quote and some dates. If anything’s unclear, we will ask for another photo.
Do you need bath re-enamelling in Cranmore?
Sometimes it’s an earlier resurfacing that has failed, peeling around the waste or bubbling. We strip what’s failing and start again.
These are the problems we are asked about most:
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
- A dull, rough surface that won’t come clean
- A peeling or bubbling previous coating
What to look for in a quote
- Whether they match the colour on site
- Who turns up on the day
- How to look after the finish
- Whether the price covers travel
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
What bath re-enamelling costs
Resurfacing from £350. Every quote is fixed and free. What we look at:
- Whether it’s a chip, crack, burn or wear
- Previous DIY repairs that have to come out
- The colour and finish to match
- How many areas need work
Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Send pictures for a quote
You can take the photos on your phone. Make sure they show:
- Good light, ideally daylight, without flash glare
- The material, if you know it
- One picture of the entire bath
- Your postcode, so we can check dates
To get a price, send a couple of photos through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Cranmore and the surrounding area
Cranmore is about 7 miles south of Midsomer Norton, in Somerset. Jobs in Cranmore are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Cranmore is one of 640 towns and villages in Somerset we cover.
We work across BA4. That includes homes on Martins Paddock, Cook's Lane and Piers Road and the roads around them. Other places close to Cranmore include East Cranmore (1 mile east), Chesterblade (1 mile south), Stoney Stratton (3 miles south), Westcombe (3 miles south) and Batcombe (3 miles south-east). Further out, we also cover Frome (7 miles north-east), Wells (8 miles west), Midsomer Norton (7 miles north), Shepton Mallet (3 miles west), Street (12 miles west) and Glastonbury (11 miles west).
Around Cranmore
Locally, our jobs take us to homes close to Church of St Bartholomew and Strode Arms Inn and the streets around them. Well-known places in the area include Nunney Castle (4.5 miles east) and Oakhill Manor Museum (3.2 miles north-west). The countryside around Cranmore includes Lamyatt Beacon.
Landlord and trade work in Cranmore
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
About our accreditations · Every repair comes with a one-year guarantee.
