Pembrokeshire · Wales
Bath re-enamelling & resurfacing in Cresselly, Pembrokeshire
Full bath re-enamelling and resurfacing at your home in Cresselly, with a one-year guarantee on every repair.
- Resurfacing from £350
- Wear marks under the taps
- Enamel that is lost its shine and feels rough
About our bath re-enamelling in Cresselly
Re-enamelling gives a worn bath a new glossy surface without a refit. It suits baths that are dull, stained, rough or chipped all over. Our repair technicians work on basins & shower trays, acrylic baths and cast iron baths, and people most frequently call us about a roll-top that’s seen better days and enamel that’s lost its shine and feels rough.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Location
- Cresselly (SA68)
- County
- Pembrokeshire
- Guarantee
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair will not last.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Previous DIY repairs that have to come out
We do not add extras on the day. What we quote from your photos is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send pictures for a quote
When you take your photos, these tips help us give you a firm price:
- What it’s made of, if you know
- A photo taken from further back
- Your postcode, so we can check dates
- Details of any past repairs
To get a price, send two or three photos through our quote form or call us. We will say immediately whether it can be repaired.
Your questions about bath re-enamelling in Cresselly
How much does bath re-enamelling cost in Cresselly?
Prices start from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo and your postcode.
Will there be a smell?
Some materials have a smell while they’re applied, which is why we ventilate. It fades as everything cures.
Can you redo someone else’s repair?
Generally, yes. Let us know what was used before.
Is it safe with children and pets around?
Just keep them out of the work area. We will let you know when it’s safe to use again.
Will the new finish last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
Can you quote from pictures?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Is the work guaranteed?
All our work carries a one-year guarantee. We will explain what it covers when we quote.
What do you need from me?
A close-up, a wider photo and your postcode. Then we will agree a date.
Towns and villages near Cresselly
What else we do in Cresselly
Materials and what they mean for the repair
Cast iron
Re-enamelling suits cast iron baths perfectly. The body lasts for generations; only the enamel wears, so a new finish makes them look new again.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
How to care for the repair
Looking after the surface is easy, and it makes a real difference:
- Avoid suction-cup mats
- Get any chip repaired quickly
- Wipe the bath dry after use in hard water areas
- Wash away dyes and oils after use
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
The longer worn enamel is left, the rougher it gets, and rust spots spread under the surface. Resurfacing sooner means less repair work first.
Our work in Cresselly
Cresselly is about 9 miles south-east of Haverfordwest, in Pembrokeshire. Anywhere in SA68, a technician comes to you. Cresselly is one of 223 towns and villages in Pembrokeshire where we work.
Jobs in SA68 work the same way as everywhere else we cover. We also cover the places around Cresselly: Jeffreyston (2 miles east), Caeriw (2 miles south-west), Redberth (2 miles south-east), Carew (2 miles south-west) and Sageston (2 miles south). We also work in nearby towns such as Haverfordwest (9 miles north-west), Milford Haven (10 miles west), Pembroke (6 miles south-west), Pembroke Dock (6 miles west), The Marsh (9 miles north-west) and Dinbych-y-Pysgod (6 miles south-east).
What’s near Cresselly
Around Cresselly, we work in homes near Cresselly Arms. The closest station to Cresselly is Saundersfoot station, roughly 3.8 miles east of the centre. Other landmarks nearby include Carew Cheriton Control Tower (2.1 miles south) and Cresswell Castle (0.9 miles north-west). The countryside around Cresselly includes Myrtle Grove Hill.
Work for landlords and builders
Landlords, letting agents and housing providers in Cresselly use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
If you manage property in Cresselly, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Repair or replace: which is better?
Replacement only makes sense in a few cases: a cracked-through bath, a change of size or shape, or a full refit. In most other cases, resurfacing is the better choice. Our bath re-enamelling starts from £350. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Why Cresselly clients choose us
- Colour-matched on site
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- Accredited with CHAS, Constructionline and SafeContractor
Read our prices page and guide to resurfacing and replacement costs.
What we are called out for in Cresselly
Once enamel loses its gloss, it stains more easily, and scrubbing it wears it down further. At that stage, resurfacing is the fix.
You may need us if you’ve spotted any of these:
- Chips and rust in more than one place
- A bath in a colour that no longer suits
- A coating lifting around the plughole
- A dull, rough surface that will not come clean
What to look for in a quote
- Is the price fixed, and does it include VAT?
- Whether they match the colour on site
- Who will actually do the work
- How soon you can use it again
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which typically takes most of the day. If we find something your photos didn’t show, we’ll explain it before carrying on.
- First we look the bath over and confirm the finish.
- Taps, tiles and the floor are masked off.
- The bath is degreased, repaired and keyed.
- We apply the primer and then the finish coats.
- We remove the masking, tidy up and give you the curing time.
Getting ready for the visit
- Make sure the room can be ventilated
- Keep children and pets away from the room on the day
- Move bottles, mats and clutter away from the area
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
