Glasgow · Scotland
Bath re-enamelling & resurfacing in Crosshill, Glasgow
Bath re-enamelling in Crosshill without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- Brown or grey marks that don’t clean off
What bath re-enamelling costs
Prices start from £350. We price every job individually. What matters most is:
- What kind of damage it is
- The material
- Where the damage is and how we get to it
- How many areas need work
Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Send pictures for a quote
You can typically get a fixed price without us visiting. To make it quick:
- Something in shot to show the size
- A photo taken from further back
- A close-up of the damage, in focus
- Good light, ideally daylight, without flash glare
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Bath re-enamelling in Crosshill without replacing anything
When a bath is structurally fine but worn out on the surface, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Typical jobs include a peeling or bubbling previous coating and chips and rust in more than one place, in cast iron baths, acrylic baths and pressed steel baths.
We stand behind the work with a one-year guarantee, so you are not left on your own once we have gone.
- Location
- Crosshill (G42, G41, G44)
- Area hub
- Glasgow
- Warranty
- A year, on every repair
- Quotes
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
When to call us in Crosshill
In hard water areas, limescale and the cleaning it needs wear enamel faster, and gritty cleaners are the worst culprits.
The most common problems we’re called about are:
- A bath that stays dull however much you clean it
- Stains that won’t shift
- Worn patches where water runs and sits
- A period or roll-top bath worth keeping
Comparing quotes
- A fixed price, and whether VAT is included
- What aftercare is recommended
- How long the guarantee is and what it covers
- Whether the colour is mixed to match
Repairing versus replacing in Crosshill
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Re-enamelling avoids all of it. Resurfacing from £350, with every job priced individually. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Why book with us
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Nothing taken out or refitted
- Free fixed quotes from pictures
Take a look at our prices page or resurfacing vs replacement cost guide.
Landlord and trade work in Crosshill
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
For anyone letting property in or around Crosshill, we’ll quote for several properties at once. Just send photos for each address and we’ll price them together.
What happens on the day
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, put protection down and get going once we have agreed what we’re doing. It normally takes most of the day, and you are welcome to carry on with your day while we work.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- We repair chips, rust spots and pitting.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure.
Before we arrive
- Keep a parking space free if you can
- Mention any earlier repairs or resurfacing
- Let the surface dry out before the visit
Getting a price
If you are in Crosshill and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
About Crosshill
Crosshill is about 2 miles south of Glasgow, in Glasgow. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. Our technicians cover 183 places across Glasgow, from the larger towns to small villages.
Every address in G42, G41 and G44 is covered, from the main roads to the quietest streets. We regularly work on streets such as Agnew Lane, Dixon Road and Grange Road. We also travel to Govanhill (1 mile north), Strathbungo (1 mile north-west), Mount Florida (1 mile south), Pollokshields (1 mile north-west) and Langside (1 mile south-west). Further out, we also cover Hillhead (3 miles north), Dowanhill (3 miles north-west), Woodlands (3 miles north), Woodside (3 miles north), North Kelvinside (3 miles north) and Partickhill (3 miles north-west).
Landmarks near Crosshill
Our clients here include homes close to The Albert Public House, Queen's Park and Couper Institute and Library and the streets around them. Also close by are Holyrood Secondary School (within half a mile east), John Bosco Secondary School (0.9 miles north-east) and 38 Dixon Avenue (within half a mile north-west). There is a railway station in Crosshill itself: Crosshill station. Further afield, we also cover the area around Princes Square (1.8 miles north) and Haggs Castle (1.4 miles west). Open spaces near Crosshill include Cathkin Braes and Hogganfield Loch.
Crosshill: your questions answered
Is it worth repairing rather than replacing?
Generally, yes. Replacement brings removal, refitting and making good, which a repair avoids. We’ll be honest if it’s not worth it.
Is the work guaranteed?
Yes: twelve months. If anything goes wrong with the repair within the year, we return to fix it.
How long is the bath unusable?
One day for most baths, ready the following day. We give you timings with the quote.
Will the bath be moved?
Not at all. Everything is done in your bathroom, with the room protected and ventilated.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
How durable is a resurfaced bath?
A well-prepared finish lasts a long time if it’s looked after. Gentle cleaning, no suction mats.
What happens once I’ve sent photos?
We review the pictures and send a fixed quote and the next dates we have.
Does re-enamelling smell?
Yes, while we are applying the finish. We set up ventilation and the smell fades as it cures.
Should I try a DIY kit first?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
Aftercare tips
How the surface is treated afterwards matters:
- Don’t leave a chip unrepaired
- Avoid suction-cup mats
- Don’t let dyes or oils sit on the finish
- Use washing-up liquid and a soft cloth
Avoid hair dye, bath bombs and oils sitting on the surface, as they can stain. Fix dripping taps quickly.
The longer worn enamel is left, the rougher it gets, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
Nearby places to Crosshill
More services for Crosshill
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- Damage hidden under a previous coating, until it’s stripped back
- A bath that’s rusted through
- A poorly supported acrylic bath, until it’s firmed up
Send us photos and we will tell you honestly.
What we work on
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
About our accreditations · Every repair comes with a one-year guarantee.
