Glasgow · Scotland

Bath Re-enamelling in Pollokshields

Fixed-price bath re-enamelling in Pollokshields and the surrounding area, normally in one visit.

  • Resurfacing from £350
  • Worn patches where water runs and sits
  • Several chips and rust patches
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath re-enamelling in Pollokshields?

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Do not use the bath until it has fully cured
  • Avoid suction-cup mats
  • A dripping tap should be fixed promptly
  • Rinse off hair dye, oils and bath bombs right away

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Repair dripping taps promptly.

Leave a peeling coating alone. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.

Bath re-enamelling at your home in Pollokshields

If your bath is sound but looks tired, re-enamelling is usually the most cost-effective option. It avoids removal, plumbing and re-tiling. If you are dealing with a bath in a colour that no longer suits and an original cast iron bath that needs restoring, we can normally put it right.

All our work is covered by a one-year guarantee, wherever you are in Glasgow.

Location
Pollokshields (G41, G42, G5)
Area hub
Glasgow
Guarantee
12 months on all our work
Quote
From £350. Free, fixed price from pictures
Call
0345 017 0787
Updated
23 October 2026
Roll-top bath being refinished by a Surface Doctor technician

When a repair is not the answer

We will not take on work that won’t last, so here’s what a repair cannot put right:

  • Steel that has corroded right through
  • Leaking taps or wastes (a plumber’s job)
  • A poorly supported acrylic bath, until it’s firmed up

Send us photos and we will tell you honestly before you book.

Surfaces we repair

  • Victorian roll-tops
  • Acrylic baths
  • Cast iron baths
  • Basins & shower trays
  • Pressed steel baths

Your questions about bath re-enamelling in Pollokshields

Can you repair something that is been repaired before?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

How quickly can you book me in?

We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.

Can you price it without visiting?

Usually, yes. A close-up and a wider photo are enough to give a fixed quote.

Do you charge for travel?

We do not add a call-out fee. The fixed price covers the visit and the work.

What happens next?

We check the damage, the material and your postcode, then reply with a quote.

How long does re-enamelling take?

Most baths are done in a day, ready the day after. We’ll confirm timings when we quote.

Do the materials smell?

Expect a mild smell while we are working that clears as it cures.

I rent my home. Can I book you?

Of course. Check with your landlord; we can send the quote to them too.

Repairing versus replacing in Pollokshields

A refit takes several trades and several days. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Prices start from £350. Compared with replacing, a repair is generally a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.

Why choose Surface Doctor in Pollokshields

  • Straight answers about what a repair can do
  • Free fixed quotes from pictures
  • CHAS and Constructionline accredited
  • Repair technicians who travel to you, UK-wide

Read our full price list and resurfacing vs replacement cost guide.

Work for landlords and builders

Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

We are used to working with agents and managing companies. Just send photos, the address and how to get access.

Materials and what they mean for the repair

Cast iron

Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.

Pressed steel

Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

DIY repairs versus a professional job

It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

Do you need bath re-enamelling in Pollokshields?

Hard water speeds up the wear, and abrasive cleaners do the most damage.

These are the problems we’re asked about most:

  • A bath in a colour that no longer suits
  • Worn patches where water runs and sits
  • An original cast iron bath that needs restoring
  • Enamel that’s lost its shine and feels rough

What to look for in a quote

  • What protection goes down before work starts
  • If travel is included in the price
  • Whether a trained technician does the job
  • Whether the price is fixed and includes VAT

Choosing a repair company

Where we work around Pollokshields

Pollokshields is about 1 mile south of Glasgow, in Glasgow. Customers in Pollokshields get the same service as everywhere else we cover: a fixed quote from photos, then a visit to do the work. We cover all 183 towns and villages in Glasgow.

Our visits in G41, G42 and G5 are booked in the same way as anywhere else. From Bruce Road, Minard Road and Leslie Road or a nearby road, we can come to you. Other places close to Pollokshields include Strathbungo (1 mile south-east), Crossmyloof (1 mile south-west), Kinning Park (1 mile north-west), Govanhill (1 mile east) and Crosshill (1 mile south-east). Within a short drive, we also cover Dowanhill (3 miles north), North Kelvinside (3 miles north), Partickhill (3 miles north-west), Kelvinside (3 miles north), Hyndland (3 miles north-west) and Wyndford (3 miles north).

Around Pollokshields

Locally, our jobs take us to homes close to Shawlands Academy, 51 pub and Glasgow Women's Library and the streets around them. Nearby too are Trinity U.F Church (within half a mile south), Craigholme School (0.5 miles west), Our Lady and St Margaret's Primary School (0.7 miles north) and Queen's Park (0.8 miles south-east). There is a railway station in Pollokshields itself: Pollokshields West station. Nearby you will also find Princes Square (1.6 miles north-east) and Scotland Street School Museum (0.7 miles north). Not far away are Hogganfield Loch and Cathkin Braes.

Map of Pollokshields © OpenStreetMap contributors

The process

Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day for most jobs. The room is left tidy and you’ll know when it can be used.

  1. First we look the bath over and confirm the finish.
  2. Everything around the bath is masked and covered.
  3. We degrease the bath, fix any damage and key the surface.
  4. We apply the primer and then the finish coats.
  5. We remove the masking, tidy up and give you the curing time.

How to prepare

  • Let us know about parking or access
  • Let us know if it has been repaired before
  • Move bottles, mats and clutter away from the area

Ask for a price

If you are in Pollokshields and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.

Get a free quote

Read more

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.