North Lanarkshire · Scotland
Bath re-enamelling & resurfacing in Crosshouse, North Lanarkshire
Fixed-price bath re-enamelling in Crosshouse and the surrounding area, normally in one visit and guaranteed for a year.
- Resurfacing from £350
- Enamel that’s lost its shine and feels rough
- An original cast iron bath that needs restoring
How it works
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day in most cases. The room is left tidy and ready to use once it has cured.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Clear toiletries, mats and anything else from around the area
- Keep children and pets away from the room on the day
Ask for a price
Upload a picture of the damage and a wider shot of the entire item, with your ML6 postcode, and we will reply with a fixed quote.
Read more
About our bath re-enamelling in Crosshouse
We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we don’t cut corners on it. We’re often asked to fix a peeling or bubbling previous coating and a bath in a colour that no longer suits, on basins & shower trays, Victorian roll-tops and pressed steel baths.
Every job is backed for twelve months in Crosshouse and everywhere else. If something goes wrong with the work, we come back.
- Where
- Crosshouse (ML6)
- Region
- North Lanarkshire
- Cover
- A year, on every repair
- Quotes
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
What your bath is made of matters
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot for the finish to last.
Signs you need bath re-enamelling in Crosshouse
Enamel’s shine is only skin deep, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
The most common problems we’re called about are:
- A coating lifting around the plughole
- A period or roll-top bath worth keeping
- Wear marks under the taps
- Staining under the taps and around the waste
Comparing quotes
- Aftercare advice
- How long it needs to cure
- What protection goes down before work starts
- How the colour is matched
What a repair cannot fix
It helps to know what we can’t do:
- Steel that has corroded right through
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
If in doubt, send pictures and we will say what we think before booking.
What we work on
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
Towns and villages near Crosshouse
What else we do in Crosshouse
Common questions in Crosshouse
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
Do you charge for travel?
There is no separate call-out charge. The fixed quote covers the visit and the work.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
Can you fix a peeling bath coating?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Can you quote from pictures?
In nearly every case. We only ask to see it in person if the photos can’t show what we need.
Will the price change on the day?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Is there a smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Can I fix it myself?
A DIY attempt is not a disaster. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Work for landlords and builders
Rented homes see more wear and tear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
If you manage property in Crosshouse, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
About Crosshouse
Crosshouse is about 2 miles south of Cumbernauld, in North Lanarkshire. Wherever you are in the ML6 postcode area, we come to you. Crosshouse is one of 89 towns and villages in North Lanarkshire we cover. We work right across the region, from Crosshouse to Glasgow (12 miles away).
Every address in ML6 is covered. We also travel to Riggend (1 mile south), Wattston (1 mile south-east), Greenfaulds (1 mile north-west), Greengairs (2 miles east) and Carbrain (2 miles north). We also work in nearby towns such as Motherwell (9 miles south), Coatbridge (5 miles south), Airdrie (4 miles south), Wishaw (10 miles south), Bellshill (7 miles south) and Kilsyth (5 miles north-west).
What’s near Crosshouse
Our customers here include homes close to Greenfaulds High School and the streets around them. The nearest railway station is Greenfaulds station, about 1 mile north-west. A little further out are Cumbernauld Castle (2.7 miles north) and Antonine Centre (1.8 miles north). The countryside around Crosshouse includes Bar Hill.
Repair or replace in Crosshouse?
Replacing the bath means a plumber, removing a heavy bath, making good the walls and tiles and days without a bathroom. Re-enamelling renews the whole surface without moving it. Prices start from £350. We do not add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why book with us
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
- We leave the room as we found it
- Same prices wherever you are
Read our prices page or resurfacing vs replacement cost guide.
Prices and what affects them
Prices start from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Doing more than one item at once
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
- Where the damage is and how we get to it
Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Getting a price from pictures
Good pictures mean an accurate price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- A wider photo showing the entire bath
- A coin beside the damage so we can judge size
- One sharp close-up of the damage
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
About our accreditations · Every repair comes with a one-year guarantee.
