Aberdeenshire · Scotland
Bath Re-enamelling in Crossroads
Local bath re-enamelling for Crossroads: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Resurfacing from £350
- Wear marks under the taps
- A peeling or bubbling previous coating
Bath re-enamelling in Crossroads, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It’s ideal if you like your bathroom but not the state of the bath. Common call-outs are for a bath that stays dull however much you clean it and a peeling or bubbling previous coating, in Victorian roll-tops, pressed steel baths and cast iron baths.
All of our repairs are guaranteed for twelve months. If something goes wrong with the work, we come back.
- Location
- Crossroads (AB31)
- Region
- Aberdeenshire
- Guarantee
- One year on every repair
- Price
- From £350. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Crossroads and nearby
Crossroads is about 14 miles south-west of Aberdeen, in Aberdeenshire. We work in every kind of home, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We cover all 161 towns and villages across Aberdeenshire, from the larger towns to small villages.
We cover every part of the AB31 postcode area and the streets around it. Close by, we cover Crathes (1 mile north), Kirkton of Durris (2 miles north-east), Woodlands (3 miles north-east), Balfour (3 miles north-east) and Banchory (3 miles north-west). Within a short drive, we also cover Westhill (9 miles north-east), Stonehaven (9 miles south-east), Kemnay (14 miles north), Laurencekirk (14 miles south), Kintore (14 miles north) and Aboyne (14 miles west).
Around Crossroads
A little further out are Crathes Castle (1.9 miles north-west) and Glen O'Dee Hospital (4.3 miles west). For a walk, there’s Scolty Hill.
When to call us in Crossroads
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
You may need us if you’ve spotted:
- A coloured bath you want in white
- Lots of chips and rust spots
- Brown or grey marks that don’t clean off
- A peeling or bubbling previous coating
Before booking anyone
- What prep work is covered
- The length of the guarantee and what it covers
- How soon you can use it again
- Whether there are any call-out or travel charges
Work for landlords and builders
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Housing associations and facilities teams use us for planned and reactive repairs. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
How to care for the repair
Simple care helps the repair last. We recommend:
- Wipe the bath dry after use in hard water areas
- Avoid suction-cup mats
- Don’t use the bath until it has fully cured
- Fix dripping taps quickly
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
On a worn bath, rust spots keep spreading and make the job bigger. It’s simpler to resurface before they spread.
How the visit works
On the day itself, there is little for you to do. Let us in and show us the room, and we’ll take it from there. The job generally runs to most of the day, including clearing up.
- The bathroom is protected and ventilation set up.
- We remove the old silicone and deep clean the bath.
- We repair chips, rust spots and pitting.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the day after.
How to prepare
- Let the surface dry out before the visit
- Have a window or extractor fan available
- Clear toiletries, mats and anything else from around the area
Get a quote
To get a price, send two or three pictures using our quote form or call us. We’ll tell you honestly if a repair is the right fix.
Advice
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is generally cheaper.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Your questions about bath re-enamelling in Crossroads
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Can you quote from photos?
In nearly every case. If photos do not show enough, we’ll ask for another angle.
Will the new finish last?
It depends on preparation, use and care. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Are there extra charges for Crossroads?
There is no separate call-out charge. Your fixed quote includes everything.
Do you come to Crossroads?
Yes. We cover the entire UK and come to Crossroads and the rest of Aberdeenshire. Send pictures and we’ll quote, or call 0345 017 0787.
How do I book?
Send photos through the quote form or call 0345 017 0787.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
Is repairing better than replacing?
Normally, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. If replacing would be better, we will say so.
Honest limits
Honesty matters more than a booking, so here’s what a repair can’t fix:
- Steel that has corroded right through
- A bath split right through the body
- An acrylic bath that flexes badly underfoot
If in doubt, send photos and we’ll say what we think before booking.
Materials we repair
- Acrylic baths
- Cast iron baths
- Basins & shower trays
- Pressed steel baths
- Victorian roll-tops
What your bath is made of matters
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
More services for Crossroads
Why repair rather than replace?
A replacement often means several trades over several days. Re-enamelling is one technician, normally one day, with the bath back in use the day after. Our bath re-enamelling starts from £350. There are no surprise extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
What you get with us
- Technicians who travel to you, UK-wide
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- Same prices wherever you are
See our prices page or bath cost comparison.
About our accreditations · Every repair comes with a one-year guarantee.
