Surrey · England
Bath Re-enamelling for Crosswater homes
Bath re-enamelling in Crosswater without the cost of replacing. Get a fixed price from your photos, then book a visit.
- Resurfacing from £350
- Chips and rust in more than one place
- Staining under the taps and around the waste
Our work in Crosswater
Crosswater is about 4 miles south of Farnham, in Surrey. Jobs in Crosswater are booked in like any other job: a fixed quote from photos, then a visit to do the work. Our repair technicians cover 395 places across Surrey, from the larger towns to small villages. We work right across the region, from Crosswater to London (38 miles away).
All of GU10 is covered. If you are just outside Crosswater, we cover Churt (1 mile south), Green Cross (1 mile south-east), Frensham (1 mile north-west), Barford (1 mile south) and Rushmoor (1 mile north-east). Larger places within reach include Guildford (11 miles north-east), Woking (15 miles north-east), Camberley (13 miles north), Farnham (4 miles north), Frimley (12 miles north) and Haslemere (5 miles south-east).
Around Crosswater
We visit homes around St John's CofE Aided Infant School, The Flashes and St John the Evangelist and the streets around them. The closest station to Crosswater is Farnham station, about 4.3 miles north of the centre. Well-known places in the area include Farnham Castle (4.9 miles north) and Chase Community Hospital (4.7 miles south-west). The countryside around Crosswater includes Gibbet Hill and Upper Lake.
Bath re-enamelling at your home in Crosswater
After cleaning, repairing and priming, we spray on the new finish. The preparation is what makes it last, and we take our time over it. If you are dealing with an old resurfacing that’s failing and an outdated colour you’d like to change, we can normally put it right.
A one-year guarantee comes as standard.
- Location
- Crosswater (GU10)
- Region
- Surrey
- Warranty
- One year on every repair
- Quote
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we cannot put right
It helps to know what we cannot do too:
- Leaking taps or wastes (a plumber’s job)
- Anything hidden under an old coating, until we remove it
- An acrylic bath that flexes badly underfoot
Not sure? Send pictures and we’ll give you a straight answer.
What we work on
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
FAQs for Crosswater
Someone resurfaced my bath and it’s peeling. Can you help?
Yes. Stripping the old coating adds time, so it’s reflected in the quote.
Is there a smell?
Some odour is normal while we spray, which is why we ventilate the bathroom. It clears as the finish cures.
How long does re-enamelling last?
Look after it and it lasts. Avoid abrasive cleaners and suction mats.
How soon can you come?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Do you resurface freestanding baths?
Yes. We can do the inside and outside.
Do you work in Crosswater?
Yes. We work across the UK and come to Crosswater. Send photos and we’ll quote, or call 0345 017 0787.
It’s been repaired before. Can you still fix it?
Yes, regularly. Removing the old work can add time, and that is in the quote.
Do I need to be at home?
Someone needs to let us in and show us the job. You don’t need to watch us work.
Repair or replace in Crosswater?
If the bath is sound, re-enamelling is generally much cheaper than replacing it, when you count removal, plumbing, tiling and decorating. It’s much quicker too. Prices start from £350. Every job is a little different, so each one is priced on its own. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why Crosswater clients choose us
- Accredited with CHAS, Constructionline and SafeContractor
- We come to you, anywhere in the UK
- No need to remove anything
- Normally one visit, start to finish
Read our prices page or resurfacing vs replacement cost guide.
DIY kit or professional repair?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is usually the cheaper route.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
Looking after it afterwards
To keep it looking its best:
- Dry the bath after use to stop limescale
- Don’t leave bottles, razors or sponges standing on the surface
- Don’t use the bath until it has fully cured
- Avoid suction-cup mats
Wipe the bath dry after use where you can, and rinse away any product left on the surface.
If a previous coating is starting to peel, do not pick at it. Water gets under it and the damage spreads, so have it stripped and resurfaced.
What your bath is made of matters
Acrylic
We resurface acrylic baths as well, using a system that bonds to acrylic. It must be solid and not flex underfoot.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Nearby places to Crosswater
Also in Crosswater
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, then carry out the work, which normally takes most of the day. If we find something your photos didn’t show, we will explain it before carrying on.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray several coats of new enamel finish.
- The bath is left to cure and can normally be used the day after.
Preparing for the visit
- Tell us if there are stairs or a lift
- Let us know about parking or access
- Move bottles, mats and clutter away from the area
How to get a price
A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them over. You’ll get a fixed quote, not an estimate.
Related advice
What affects the price in Crosswater
Resurfacing from £350. Quotes are free and the price is fixed. What we look at:
- Previous DIY repairs that have to come out
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Doing more than one item at once
Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Send pictures for a quote
The better the photos, the more accurate the price. Here’s what helps:
- A wider photo showing the entire bath
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- A clear, close picture of the problem area
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
When to call us in Crosswater
Many baths we resurface have simply been well used, and only the surface is worn. The body of the bath is generally perfectly sound.
The most common problems we are called about are:
- An original cast iron bath that needs restoring
- Thin, worn enamel in places
- A bath that stays dull however much you clean it
- An old resurfacing that’s failing
Before you book anyone
- Who turns up on the day
- Whether they match the colour on site
- What prep work is covered
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
