Surrey · England
Bath re-enamelling & resurfacing in Barford, Surrey
Full bath re-enamelling and resurfacing in Barford, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- An outdated colour you’d like to change
- Lots of chips and rust spots
How we price bath re-enamelling
Resurfacing from £350. Quotes are free and the price is fixed. What we take into account:
- Whether it’s a chip, crack, burn or wear
- How many areas need work
- Whether old repairs or coatings need taking off
- How hard the colour is to match
Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
How to get a fixed price
Photographing the damage takes a minute, and it saves a visit. Try to send:
- Natural light rather than flash
- One picture of the entire bath
- The material, if you know it
- One sharp close-up of the damage
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and you’ll get a fixed figure back.
Bath re-enamelling in Barford, done in place
Most baths are re-enamelled in a day, and you can use the bath the next day. Taps, tiles, panels and plumbing all stay in place. If you’re dealing with an original cast iron bath that needs restoring and enamel that’s lost its shine and feels rough, we can typically put it right, whatever the material.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Area
- Barford (GU10, GU26)
- Region
- Surrey
- Cover
- One year on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Acrylic that moves when you stand in it
- Leaking taps or wastes (a plumber’s job)
- A bath split right through the body
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic baths
- Cast iron baths
- Victorian roll-tops
- Basins & shower trays
- Pressed steel baths
Barford and the surrounding area
Barford is about 4 miles east of Bordon, in Surrey. Wherever you are in the GU10 postcode area, we carry out the work at your property. Barford is one of 395 towns and villages in Surrey where we work. Our jobs stretch from Barford to London (39 miles away).
Our technicians cover all of the GU10 and GU26 postcode area. Streets in the area include Churt Road, Kitts Lane and Hammer Lane, and we cover them all. Close by, we cover Whitmoor Vale (1 mile south-east), Churt (1 mile north), Green Cross (1 mile north-east), Beacon Hill (1 mile east) and Crosswater (1 mile north). Within a short drive, we also cover Guildford (12 miles north-east), Camberley (14 miles north), Farnham (6 miles north), Frimley (13 miles north), Haslemere (4 miles south-east) and Cranleigh (13 miles east).
What’s near Barford
Our customers here include homes close to Crossways Inn, St John's CofE Aided Infant School and The Flashes, among other places. The closest station to Barford is Haslemere station, roughly 3.9 miles south-east. Other landmarks nearby include Chase Community Hospital (3.8 miles south-west). The countryside around Barford includes Gibbet Hill and Upper Lake.
Common problems we fix in Barford
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Resurfacing sorts them out together.
Send us a photo if you notice any of these:
- A bath that stays dull however much you clean it
- Stains that won’t shift
- Thin, worn enamel in places
- Lots of chips and rust spots
Comparing quotes
- Who will actually do the work
- Whether the colour is mixed to match
- If travel is included in the price
- How to look after the finish
FAQs for Barford
Is there any odour?
There can be some smell while we work. It clears as the materials cure.
Do you work in Barford?
Yes. We work across the UK and travel to Barford and the rest of Surrey. Send us photos for a fixed quote, or call 0345 017 0787.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
How long will the bath be out of use?
One day for most baths and can be used the day after. We’ll confirm timings when we quote.
Is there a guarantee?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Are there extra charges for Barford?
Travel is included in the price, with the same prices everywhere we work.
Does the bath have to be removed?
No. We resurface it in place, so nothing else is disturbed.
What happens next?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
What happens on the day
Arrival times are agreed in advance, so you know when to expect us. On site, it takes the best part of a day. The room is left tidy.
- We check the bath and agree the finish with you.
- Taps, tiles and the floor are masked off.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
Preparing for the visit
- Open a window if you can
- Mention if the room is upstairs or in a flat
- Keep pets and children out of the room while we work
Get a quote
Send us pictures of the damage and one of the entire item, with your GU10 postcode, and we’ll come back with a fixed quote.
Related advice
How to look after the repair
After the repair has cured, a few habits help it last:
- Stick to gentle, non-abrasive cleaners
- A quick wipe after use keeps limescale away
- Keep suction mats out of the bath
- Do not leave bottles, razors or sponges standing on the surface
Give the finish its full curing time before using the bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Repair or replace: which is better?
When the bathroom is fine apart from the bath’s finish, resurfacing is the simplest answer. Nothing else is disturbed. Our bath re-enamelling starts from £350. The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
Why us?
- No extra charge for your area
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Fixed prices from your pictures
Read our full price list or bath cost comparison.
Work for landlords and builders
We work for landlords, letting agents and housing providers in Barford as well as householders. A repair between tenants keeps the property empty for less time, and it usually costs far less than a refit.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.
Different materials, different repairs
Acrylic
Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so resurfacing gives them a new life.
Nearby places to Barford
Other services in Barford
About our accreditations · Every repair comes with a one-year guarantee.
