Essex · England
Bath Re-enamelling for Crow Green homes
Full bath re-enamelling and resurfacing in Crow Green, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Brown or grey marks that do not clean off
- Wear marks under the taps
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. These are the things that affect it:
- How easy the damage is to reach
- How many areas need work
- The material
- How hard the colour is to match
We do not add extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
Most quotes are done from pictures alone. To make it quick:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Any details about the material
- One picture of the entire bath
Send us a picture of the damage and a wider shot of the whole item, with your CM15 postcode, and we will come back with a fixed quote.
Bath re-enamelling at your home in Crow Green
If your bath is sound but looks tired, resurfacing is normally the best value. It avoids removal, plumbing and re-tiling. Common call-outs are for worn patches where water runs and sits and a peeling or bubbling previous coating, across cast iron baths, acrylic baths and Victorian roll-tops.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Where
- Crow Green (CM15)
- Region
- Essex
- Guarantee
- One year on every repair
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Should you replace it?
If the bath is sound, re-enamelling is normally much cheaper than replacing it, once you add removal, plumbing, tiling and decorating to the price of a new bath. It’s also far quicker. Our bath re-enamelling starts from £350. A repair normally costs much less than people expect, particularly next to the cost of replacement. Photos let us give you the exact figure.
Why Crow Green clients choose us
- We leave the room as we found it
- Everything repaired in place
- Straight answers about what a repair can do
- One visit for most repairs
Read our pricing or resurfacing vs replacement cost guide.
Covering Crow Green
Crow Green is about 2 miles north of Brentwood, in Essex. Book a date that suits you, and you will know when to expect us, so you are not left waiting in all day. We cover 644 places in Essex, from the larger towns to small villages. We work right across the region, from Crow Green to London (19 miles away).
Our visits in CM15 work the same way as everywhere else we cover. Other places close to Crow Green include Pilgrims Hatch (1 mile south), Doddinghurst Common (1 mile north-west), Bentley (1 mile west), Kelvedon Hatch (1 mile north-west) and Coxtie Green (1 mile west). Within a short drive, we also cover Chelmsford (10 miles north-east), Basildon (9 miles south-east), Harlow (11 miles north-west), Canvey Island (15 miles south-east), Billericay (6 miles east) and Rayleigh (14 miles east).
Near you in Crow Green
Locally, our jobs take us to homes close to Weald Country Park, Larchwood Primary School and Becket Keys Church of England School. You will also find Black Horse Inn (0.8 miles south-west), Sawyers Hall College (1.5 miles south) and Trinity Church (1 mile south-west). The closest station to Crow Green is Shenfield station, roughly 2.1 miles south-east. Nearby you’ll also find Brentwood Community Hospital (1.9 miles south-east). The countryside around Crow Green includes Thorndon Park.
Your questions about bath re-enamelling in Crow Green
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Can you price it without visiting?
Nearly always. If pictures do not show enough, we’ll ask for another angle.
Is the work guaranteed?
Yes: twelve months. If there’s a problem with the work in that time, we come back and put it right.
Will it make a mess?
No. The work area is masked and covered, and we leave the room clean.
Can you resurface a pink bath in white?
Yes, most people go for white. Mention the colour you want when you send pictures.
It’s been repaired before. Can you still fix it?
Most of the time. Let us know what was used before.
How long is the bath unusable?
Typically a day, then it’s ready to use the following day. A badly pitted bath can need a second day.
What happens next?
We look at the pictures and reply with a fixed price and some dates. If anything’s unclear, we will ask for another photo.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Common problems we fix in Crow Green
A dull surface stains and holds dirt, and scrubbing it wears it down further. That is the point where re-enamelling makes sense.
It’s worth getting a quote if you see:
- An old resurfacing that is failing
- Worn patches where water runs and sits
- Brown or grey marks that do not clean off
- An original cast iron bath that needs restoring
Comparing quotes
- Whether the price is fixed and includes VAT
- Whether they match the colour on site
- When it can be used again
- How changes to the job are handled
Looking after it afterwards
Nothing complicated is needed:
- Fix dripping taps quickly
- Get any chip repaired quickly
- Keep suction mats out of the bath
- Dry the bath after use to stop limescale
Wait for the curing time we give you before the first bath. Then, gentle cleaning with a soft cloth is enough.
On a worn bath, rust spots keep spreading. Resurfacing before they spread keeps it simpler.
Places near Crow Green
What else we do in Crow Green
Should I try a DIY kit first?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is generally the cheaper route.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
How it works
Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a full day in most cases. The room is left tidy.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure until the following day.
Before we arrive
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Keep children and pets away from the room on the day
Getting a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we will send back a fixed quote and some dates.
Read more
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair won’t do:
- An acrylic bath that flexes badly underfoot
- A metal bath with a through crack
- Steel that has corroded right through
Not sure? Send photos and we’ll give you a straight answer before you book.
Materials we repair
- Cast iron baths
- Pressed steel baths
- Basins & shower trays
- Acrylic baths
- Victorian roll-tops
About our accreditations · Every repair comes with a one-year guarantee.
