North Yorkshire · England
Bath Re-enamelling in Crowdon
Problem with your bath in Crowdon? We put it right where it is, mix the colour on the day and back it with a one-year guarantee.
- Resurfacing from £350
- A coloured bath you want in white
- Enamel that’s lost its shine and feels rough
Bath re-enamelling at your home in Crowdon
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Our repair technicians work on basins & shower trays, cast iron baths and pressed steel baths, and people most frequently call us about staining under the taps and around the waste and a peeling or bubbling previous coating.
The work is covered for a year after we finish. If anything isn’t right, ring us and we’ll come back.
- Location
- Crowdon (YO13)
- Area hub
- North Yorkshire
- Cover
- 12 months on all our work
- Quotes
- From £350. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Looking after it afterwards
Aftercare is simple:
- Avoid suction-cup mats
- Clean with a soft cloth and mild detergent
- Leave the bath for the full curing time before using it
- A quick wipe after use keeps limescale away
Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.
Worn enamel only gets rougher with time, and any rust spreads underneath. Acting earlier keeps the preparation simpler.
When to call us in Crowdon
The gloss on enamel is thin, and every scrub with an abrasive cleaner takes a little away. After years of use, the surface becomes porous and stains easily.
Typical reasons for a call-out include:
- Thin, worn enamel in places
- A dull, rough surface that won’t come clean
- An old resurfacing that’s failing
- Brown or grey marks that do not clean off
Questions to ask before booking
- The length of the guarantee and what it covers
- What prep work is covered
- What happens if they find more damage
- How soon you can use it again
How we price bath re-enamelling
Resurfacing from £350. There is no area surcharge for Crowdon. What changes the price is:
- How hard the colour is to match
- The material
- The size and number of damaged areas
- How many items we do on one visit
Compared with replacing, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. Your fixed quote shows exactly what’s included.
How to get a fixed quote
Most quotes are done from photos alone. To make it quick:
- The material, if you know it
- Daylight if possible, and no flash reflection
- A clear, close picture of the problem area
- One picture of the entire bath
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.
The process
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a full day, depending on what we find, and we finish by cleaning up and talking you through the result.
- We mask and protect the room and ventilate it.
- The bath is cleaned, degreased and any chips or rust repaired.
- We prepare the surface and apply a bonding primer.
- We spray on the new enamel finish in several coats.
- The bath is left to cure and can normally be used the day after.
Before we arrive
- Clear toiletries, mats and anything else from around the area
- Mention any earlier repairs or resurfacing
- Keep a parking space free if you can
Ask for a price
If you are in Crowdon and want a price, photos are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.
Advice
Landlord and trade work in Crowdon
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
For anyone letting property in or around Crowdon, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
When we would advise against a repair
We would rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Holes rusted through the metal
- A metal bath with a through crack
- Leaking taps or wastes (a plumber’s job)
Not sure? Send pictures and we’ll give you a straight answer.
Surfaces we repair
- Acrylic baths
- Victorian roll-tops
- Pressed steel baths
- Basins & shower trays
- Cast iron baths
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
FAQs for Crowdon
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we’ll reply with the earliest dates.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
What does bath re-enamelling cost?
Prices start from £350. We give a fixed quote from your pictures. Send a close-up of the damage and a wider photo and your postcode.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. Properly prepared and looked after, it lasts well, and it’s guaranteed for a year.
Is it safe with children and pets around?
On the day, the room should be kept clear of pets and children, so the repair isn’t disturbed while it cures.
What if the damage is worse than the pictures show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Can you do the outside of a roll-top?
Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
About Crowdon
Crowdon is about 6 miles north-west of Scarborough, in North Yorkshire. Jobs in Crowdon are booked in like any other job: a fixed quote from photos, and a technician at your door on the day. We work in 626 places across North Yorkshire. You can also see our page for Leeds, about 58 miles away.
Every address in YO13 is covered, from the main roads to the quietest streets. Jobs here include addresses on Downdale Road and Hodgson Hill. If you are just outside Crowdon, we cover Staintondale (1 mile north-west), Cloughton Newlands (1 mile south-east), Lind Head (2 miles south), Cloughton (2 miles south) and Ravenscar (3 miles north). Within a short drive, we also cover Scarborough (6 miles south-east), Whitby (10 miles north-west), Falsgrave (6 miles south), Filey (13 miles south-east), Pickering (15 miles south-west) and Northstead (5 miles south-east).
What’s near Crowdon
Locally, our jobs take us to homes close to St John the Baptist and The Hayburn Wyke Inn and the streets around them. Further afield, we also cover the area around Cross Lane Hospital (5 miles south).
Towns and villages near Crowdon
What else we do in Crowdon
About our accreditations · Every repair comes with a one-year guarantee.
