Staffordshire · England
Bath re-enamelling & resurfacing in Croxall, Staffordshire
Bath re-enamelling in Croxall without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Resurfacing from £350
- A bath in a colour that no longer suits
- Brown or grey marks that do not clean off
Bath re-enamelling in Croxall, done in place
Re-enamelling gives a worn bath a new glossy surface without taking anything out. It’s the answer when the entire bath is tired rather than one spot. We’re often asked to fix brown or grey marks that don’t clean off and an outdated colour you’d like to change, in cast iron baths, acrylic baths and pressed steel baths.
We stand behind the work with a one-year guarantee.
- Location
- Croxall (WS13)
- County
- Staffordshire
- Guarantee
- A year, on every repair
- Quotes
- From £350. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. The body lasts for generations; only the enamel wears, so resurfacing gives them a new life.
Our work in Croxall
Croxall is about 6 miles north-east of Lichfield, in Staffordshire. Whether you’re in the middle of Croxall or on the outskirts, the service is the same: a fixed price, a tidy visit and a guarantee. We work in 512 places in Staffordshire. You can also see our page for Birmingham, about 19 miles away.
Our visits in WS13 are booked in the same way as anywhere else. Other places close to Croxall include Alrewas (2 miles north-west), Barton Green (2 miles north-west), Fradley (3 miles west), Barton-under-Needwood (3 miles north) and Fradley South (3 miles west). Further out, we also cover Burton upon Trent (6 miles north-east), Tamworth (6 miles south), Cannock (13 miles west), Lichfield (6 miles south-west), Rugeley (10 miles west) and Burntwood (10 miles west).
Landmarks near Croxall
Typical jobs here are in homes near Church of St John the Baptist and Mary Howard CofE (VC) Primary School, among other places. The closest station to Croxall is Lichfield Trent Valley station, roughly 4.7 miles south-west of the centre. Nearby you will also find Barton Under Needwood Cottage Hospital (3.1 miles north) and Alrewas and Fradley (2.6 miles west).
FAQs for Croxall
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Does re-enamelling smell?
Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.
Do you work for landlords and businesses?
Yes. We work for landlords, agents, builders and businesses as well as householders across Staffordshire.
Are you a vetted contractor?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. The price only changes if you agree.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Mention it when you send photos.
Can tenants book a repair?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted before the end of a tenancy.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
The process
You do not need to empty the room beforehand. Everything we use comes in the van with us, put protection down and start once you are happy with the plan. It typically takes a full day, and you can get on with other things while we’re there.
- The bathroom is protected and ventilation set up.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Let us know which floor the room is on
- Open a window if you can
- Ensure the area is dry
How to get a price
If you’re in Croxall and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Advice
What bath re-enamelling costs
Resurfacing from £350. A fixed quote means you know the cost before you book. We look at:
- The size and number of damaged areas
- How easy the damage is to reach
- What the surface is made of
- Any earlier repairs that need removing first
We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Quotes from your photos
You can generally get a fixed quote without us visiting. To help us price it:
- Your postcode, so we can check dates
- Good light, ideally daylight, without flash glare
- Something in shot to show the size
- One picture of the entire bath
The quickest way to a price is to send a couple of pictures using our quote form or call us. We’ll say immediately whether it can be repaired.
Work for landlords and builders
Landlords, letting agents and housing providers in Croxall use us as well as householders. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.
We regularly work with letting and managing agents. Send the address, pictures and access details.
Keeping it looking good
Once the work has cured, treat it gently:
- Fix dripping taps quickly
- Keep toiletries on a shelf rather than in the bath
- Get any chip repaired quickly
- Keep suction mats out of the bath
Give the finish its full curing time before using the bath. After that, a soft cloth and washing-up liquid is all it needs.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Honest limits
Before you book, it’s worth knowing the limits:
- Anything hidden under an old coating, until we remove it
- Acrylic that moves when you stand in it
- A cast iron or steel bath that’s cracked right through
If in doubt, send photos and we will say what we think before you book.
What we work on
- Basins & shower trays
- Pressed steel baths
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
What we’re called out for in Croxall
Older baths often have several problems at once: worn patches, chips, rust spots and stains. Re-enamelling deals with all of them in one go.
Signs it’s time to call us include:
- A bath in a colour that no longer suits
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
- Brown or grey marks that don’t clean off
Comparing quotes
- How your room will be protected
- What prep work is covered
- If travel is included in the price
- What happens if the damage is worse than the photos show
Can I fix it myself?
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Towns and villages near Croxall
More services for Croxall
About our accreditations · Every repair comes with a one-year guarantee.
