Buckinghamshire · England
Bath Re-enamelling for Cryers Hill homes
Full bath re-enamelling and resurfacing in Cryers Hill, carried out at your home and guaranteed for a year.
- Resurfacing from £350
- Several chips and rust patches
- A period or roll-top bath worth keeping
How we price bath re-enamelling
Resurfacing from £350. Each job gets its own fixed quote. These are the things that affect it:
- Unusual colours or finishes
- What kind of damage it is
- Whether old repairs or coatings need taking off
- Whether we combine several jobs
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your photos
The better the pictures, the more accurate the price. Here’s what helps:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- Any details about the material
- Your postcode, so we can check dates
We price from photos so you do not have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and you will get a fixed figure back.
Bath re-enamelling in Cryers Hill, done in place
After re-enamelling, the bath has a smooth, glossy, new-looking surface, without any of the disruption of replacing it. It suits anyone happy with the bathroom apart from the bath. Typical jobs include enamel that’s lost its shine and feels rough and chips and rust in more than one place, on cast iron baths, basins & shower trays and acrylic baths.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Where
- Cryers Hill (HP15)
- Region
- Buckinghamshire
- Warranty
- A year, on every repair
- Quote
- From £350. Free and fixed, from your photos
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Keeping it looking good
A little care keeps the finish looking good. We recommend:
- Leave the bath for the full curing time before using it
- Have chips seen to early
- Rinse off hair dye, oils and bath bombs straight away
- Fix dripping taps quickly
Treat the new finish gently at first: give it the full curing time, then clean it gently. From then on, avoid abrasives and suction mats.
If a previous coating is starting to peel, don’t pick at it. Water gets under it and the damage spreads, so it’s better to have it stripped and redone.
Repair or replace in Cryers Hill?
When the bathroom is fine apart from the bath’s finish, re-enamelling is the least disruptive fix. Tiles, panels and taps stay put. Prices start from £350. Our prices are the same across the UK, with no extra for Cryers Hill. What changes the price is the job itself: the material, the amount of damage and how many items.
What you get with us
- Fixed prices from your photos
- Straight answers about what a repair can do
- Dust sheets down, tidy finish
- One visit for most repairs
Take a look at our pricing or guide to resurfacing and replacement costs.
Covering Cryers Hill
Cryers Hill is about 2 miles north of High Wycombe, in Buckinghamshire. Whether you’re in the middle of Cryers Hill or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Cryers Hill is one of 263 towns and villages in Buckinghamshire where we work. We work right across the region, from Cryers Hill to London (30 miles away).
Jobs in HP15 are booked in the same way as anywhere else. We regularly work on streets such as Four Ashes Road, Cryers Hill Road and Cryers Hill Lane and the roads around them. We also travel to Four Ashes (1 mile south), Widmer End (1 mile east), Great Kingshill (1 mile north), Hughenden Valley (1 mile west) and Spurlands End (1 mile east). Within a short drive, we also cover Aylesbury (11 miles north), Chesham (6 miles north-east), Marlow (6 miles south), Amersham (6 miles east), Beaconsfield (5 miles south-east) and Chalfont St Peter (9 miles south-east).
Landmarks near Cryers Hill
Typical jobs here are in homes near Great Kingshill Church of England Combined School, Sir William Ramsay School and The White Lion pub, among other places. Also close by are Pipers Corner School (0.6 miles north-west) and Church of the Good Shepherd (0.8 miles east). For rail, the closest station is High Wycombe station, roughly 2.4 miles south of the centre. A little further out are Eden (2.5 miles south) and Hospital of St John the Baptist (2.5 miles south). Open spaces near Cryers Hill include Prestwood Local Nature Reserve.
Also near Cryers Hill
What else we do in Cryers Hill
How the visit works
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes most of the day. Before we leave, we explain the curing time and the aftercare.
- First we protect the bathroom and set up ventilation.
- Next we degrease the bath and fix chips and rust spots.
- The surface is prepared and a bonding primer applied.
- We spray on the new enamel finish in several coats.
- Once cured, normally by the day after, the bath is ready.
Preparing for the visit
- Tell us about parking, stairs or access
- Let us know which floor the room is on
- Have a window or extractor fan available
Get a quote
You don’t need a survey visit. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Advice
Can I fix it myself?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and the old filler has to come out before a proper repair.
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Cast iron
Cast iron baths are the classic candidate for re-enamelling. They’re built to last, and only the surface wears, so a new finish makes them look new again.
Honest limits
A few problems are outside what a surface repair can do:
- A metal bath with a through crack
- A bath that is rusted through
- Leaks from fittings rather than the bath
Send us photos and we’ll tell you honestly.
Materials we work on in Cryers Hill
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Cast iron baths
- Acrylic baths
Cryers Hill questions
What information do you need?
Just photos, your postcode and a contact number. On the day, we only need access to the room.
Can you quote from pictures?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
Will there be a smell?
Expect a mild smell while we are working, which fades afterwards.
Will the bath be moved?
No. It’s re-enamelled where it stands, so nothing else is disturbed.
Can a failed resurfacing be redone?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Can tenants book a repair?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do you resurface freestanding baths?
Yes. We can do the inside and outside if you’d like.
Is repairing better than replacing?
Usually, when the rest is in good condition. Repairing avoids the cost and disruption of replacing. We’ll tell you honestly if replacement makes more sense.
Do you need bath re-enamelling in Cryers Hill?
Enamel wears gradually. Years of cleaning, hard water and hot baths dull the surface, starting where water runs and sits.
Signs it’s time to call us include:
- A period or roll-top bath worth keeping
- Enamel that is lost its shine and feels rough
- An outdated colour you’d like to change
- Several chips and rust patches
Comparing quotes
- How the room is protected while they work
- What preparation is included
- How changes to the job are handled
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
