Swansea · Wales
Bath Re-enamelling in Crymlyn Burrows
Fixed-price bath re-enamelling in Crymlyn Burrows and the surrounding area, typically in one visit.
- Resurfacing from £350
- Staining under the taps and around the waste
- An original cast iron bath that needs restoring
Bath re-enamelling at your home in Crymlyn Burrows
We resurface cast iron, steel and acrylic baths, including roll-tops and period baths. Several coats of finish go on over a bonding primer, after the bath has been cleaned, repaired and keyed. Common call-outs are for lots of chips and rust spots and a bath in a colour that no longer suits, across cast iron baths, acrylic baths and Victorian roll-tops.
Every job is backed for twelve months. If something goes wrong with the work, we come back.
- Location
- Crymlyn Burrows (SA1)
- Region
- Swansea
- Warranty
- 12 months on all our work
- Price
- From £350. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
Crymlyn Burrows questions
Which areas do you work in?
All of Swansea, and the rest of the UK. Travel is included in the price.
Can you do the outside of a roll-top?
Yes, frequently. We resurface the inside, and the outside can be refinished too.
Are you a vetted contractor?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Does someone need to be in?
Yes. We need access to the room while we work, at a time we agree with you.
Do you cover Crymlyn Burrows?
Yes, we do. We send a technician to Crymlyn Burrows for every job, and the price is the same as everywhere else.
Can you resurface a pink bath in white?
Yes. Coloured baths can be resurfaced in white, and we can do the rest of the suite as well.
Can a failed resurfacing be redone?
In most cases. We strip the failing coating and resurface it properly. Tell us about it when you ask for a quote.
Will the price change on the day?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Common problems we fix in Crymlyn Burrows
Often the bath has just had decades of use. The body of the bath is typically perfectly sound.
These are the problems we are asked about most:
- Enamel that is lost its shine and feels rough
- Thin, worn enamel in places
- A period or roll-top bath worth keeping
- Chips and rust in more than one place
Questions to ask before you book
- What happens if they find more damage
- How long it needs to cure
- Whether cleaning and preparation are in the price
- Whether the colour is mixed to match
Crymlyn Burrows and nearby
Crymlyn Burrows is about 2 miles east of Greenhill, in Swansea. We travel to clients in Crymlyn Burrows and nearby villages, so you do not need to take anything anywhere. Crymlyn Burrows is one of 153 towns and villages in Swansea we cover.
Our visits in SA1 work the same way as everywhere else we cover. Whether you live on Fabian Way, Elba Crescent and Baldwin's Crescent or anywhere nearby, we can come to you. If you are just outside Crymlyn Burrows, we cover Jersey Marine (1 mile north-east), Llandarcy (2 miles north-east), Winch Wen (2 miles north), Pentre Dwr (2 miles north) and Coedffranc (2 miles north-east). We also work in nearby towns such as Swansea (3 miles west), Morriston (4 miles north-west), Mount Pleasant (3 miles west), Gorseinon (7 miles north-west), Uplands (3 miles west) and Sandfields (3 miles west).
What’s near Crymlyn Burrows
In Crymlyn Burrows, that means homes near Cefn Hengoed Community School, St Margaret's Chapel and Vale Of Neath Arms, among other places. The closest station to Crymlyn Burrows is Swansea station, about 2.2 miles west. Other landmarks nearby include The Tramshed (2 miles west) and St. David's Shopping Centre (2.3 miles west). Not far away are Pen Crymlyn and Pluck Lake.
What we do, step by step
We work cleanly and quietly, so you can stay at home while we’re there. Protection goes down first, then the job itself takes a full day. At the end we talk you through the curing time and the aftercare.
- The room is masked, protected and ventilated.
- We clean and degrease the bath and repair any chips or rust.
- We key the surface and put on a bonding primer.
- We spray several coats of new enamel finish.
- The bath is left to cure and can usually be used the next day.
How to prepare
- Have somewhere for us to park nearby if possible
- Mention if the room is upstairs or in a flat
- Make sure the area is dry
How to get a price
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll reply with a fixed quote and the earliest dates we have.
Advice
Places near Crymlyn Burrows
Other services in Crymlyn Burrows
Repair or replace: which is better?
A refit takes several trades and several days. Resurfacing is one technician, normally in a day, with the bath ready the following day. Prices start from £350. Rather than charging by the hour, we fix the price before we start. It depends on the damage, the material and access.
Why book with us
- Same prices wherever you are
- Most jobs done in one visit
- Fixed prices from your photos
- Colour-matched on site
See our full price list and resurfacing vs replacement cost guide.
What affects the price in Crymlyn Burrows
Prices start from £350. There is no area surcharge for Crymlyn Burrows. What changes the price is:
- Whether we combine several jobs
- The material and finish
- Any earlier repairs that need removing first
- How many areas need work
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed quote from your photos, so there are no surprises on the day.
How to get a fixed quote
Before you send pictures, a few simple things make all the difference:
- Where you are, by postcode
- A coin or ruler next to the damage for scale
- One sharp close-up of the damage
- Good light, ideally daylight, without flash glare
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
What we cannot put right
It helps to know what we can’t do too:
- Leaks from fittings rather than the bath
- A bath split right through the body
- Holes rusted through the metal
Send us photos and we will tell you honestly.
Surfaces we repair
- Pressed steel baths
- Victorian roll-tops
- Basins & shower trays
- Acrylic baths
- Cast iron baths
Repairs by material
Roll-top and period baths
Freestanding roll-tops can be done inside and out, and the outside can be refinished too.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that’s what we repair.
Work for landlords and builders
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send pictures.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our accreditations · Every repair comes with a one-year guarantee.
