Somerset · England
Bath Re-enamelling for Culverhays homes
Bath re-enamelling across Culverhays and nearby, generally in one visit.
- Resurfacing from £350
- Enamel that is lost its shine and feels rough
- Chips and rust in more than one place
Bath re-enamelling at your home in Culverhays
Resurfacing renews the whole surface of the bath without taking anything out. It’s the answer when the entire bath is tired rather than one spot. If you’re dealing with a peeling or bubbling previous coating and several chips and rust patches, we can generally put it right, whatever the material.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll sort it.
- Where
- Culverhays (TA4)
- Region
- Somerset
- Guarantee
- 12 months on all our work
- Quote
- From £350. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
How to care for the repair
Nothing complicated is needed, just a few sensible habits:
- Leave the bath for the full curing time before using it
- Use washing-up liquid and a soft cloth
- Keep suction mats out of the bath
- Have chips seen to early
Stick to mild, non-abrasive cleaners, don’t use suction bath mats, and don’t leave bottles or razors standing on the surface.
On a worn bath, rust spots keep spreading, and each one adds to the preparation. It’s simpler to resurface before they spread.
How we price bath re-enamelling
Prices start from £350. There are no hourly rates or hidden extras. The price is based on:
- The material and finish
- How hard the colour is to match
- How easy the damage is to reach
- The size and number of damaged areas
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you’ll get a fixed figure.
Send photos for a quote
Most quotes are done from photos alone. To make it quick:
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- A wider photo showing the whole bath
Upload a picture of the damage and one of the entire item, and tell us you are in Culverhays, and we’ll come back with a fixed quote.
Places near Culverhays
What else we do in Culverhays
Do you need bath re-enamelling in Culverhays?
A dull surface stains and holds dirt, and cleaning harder only makes it worse. At that stage, resurfacing is the fix.
Typical reasons for a call-out include:
- Brown or grey marks that don’t clean off
- A roll-top that’s seen better days
- A coating lifting around the plughole
- An outdated colour you’d like to change
Comparing quotes
- How changes to the job are handled
- The length of the guarantee and what it covers
- If travel is included in the price
- When it can be used again
Repairing versus replacing in Culverhays
Getting a cast iron bath out is hard work: they’re heavy, often need breaking up, and a new one is not cheap. Resurfacing in place avoids that entirely. Prices start from £350. We don’t add extras on the day. The price we quote from your pictures is the price you pay, and if the damage turns out to be different, we discuss it before starting.
Why us?
- We’ll tell you if it’s not worth repairing
- Colour mixed on the day to match
- One price list for the entire UK
- Rooms protected and left tidy
See our full price list or resurfacing vs replacement cost guide.
Your questions about bath re-enamelling in Culverhays
Can you fix a peeling bath coating?
Yes, we do this regularly. Stripping the old coating adds time, so it’s reflected in the quote.
What happens once I’ve sent pictures?
We come back with a fixed price, plus dates. There is no obligation to book.
How durable is a resurfaced bath?
That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and our work is guaranteed for a year.
Does re-enamelling smell?
A little, during the work. Ventilation keeps it down, and it fades as the finish cures.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
Can you make a coloured bath white?
Yes, white is the usual choice. Tell us what you’d like when you ask for a quote.
It’s been repaired before. Can you still fix it?
In most cases. We remove the old repair before doing a new one, so let us know about it.
Do I need to be at home?
Yes. The technician needs access to the room for the visit, at a time we agree with you.
About Culverhays
Culverhays is about 10 miles south-east of Minehead, in Somerset. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. We cover all 640 towns and villages in Somerset.
Postcode districts we cover here: TA4. If you’re just outside Culverhays, we cover Newton (1 mile north-west), Kingswood (1 mile south-west), Bicknoller (1 mile north), Stogumber (1 mile south-west) and Vellow (1 mile west). Within a short drive, we also cover Taunton (11 miles south-east), Bridgwater (12 miles east), Minehead (10 miles north-west), Burnham-on-Sea (14 miles north-east), Wellington (11 miles south) and Sydenham (13 miles east).
Landmarks near Culverhays
Around Culverhays, we work in homes near Bicknoller Inn, Church of St George and Stogumber CofE Primary School. A little further out are Bakelite Museum (2.8 miles north-west). For a walk, there is Wills Neck.
Work for landlords and builders
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We work for landlords, letting agents and housing providers in Culverhays as well as householders. A repair between tenants keeps the property empty for less time, and it typically costs far less than a refit.
What a repair can’t fix
Not everything can be repaired, and we will tell you before we start. We cannot fix:
- Leaking taps or wastes (a plumber’s job)
- Acrylic that moves when you stand in it
- A bath that’s rusted through
If in doubt, send photos and we’ll say what we think.
Surfaces we repair
- Pressed steel baths
- Acrylic baths
- Victorian roll-tops
- Cast iron baths
- Basins & shower trays
Repairs by material
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
What happens on the day
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, carry out the work and clear up. Allow most of the day from start to finish. Before we go, we will explain how long to leave it and what to avoid for the first few days.
- We sheet, mask and ventilate the room.
- We remove the old silicone and deep clean the bath.
- Chips, rust and pitting are repaired.
- We key the bath and apply a bonding primer.
- The new finish is sprayed on in several coats and left to cure until the next day.
Getting ready for the visit
- Mention any earlier repairs or resurfacing
- Mention if the room is upstairs or in a flat
- Keep children and pets away from the room on the day
How to get a price
If you are in Culverhays and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
