Somerset · England
Bath Re-enamelling for Minehead homes
Full bath re-enamelling and resurfacing at your home in Minehead, with a one-year guarantee on every repair.
- Resurfacing from £350
- A bath in a colour that no longer suits
- An original cast iron bath that needs restoring
What we’re called out for in Minehead
Frequently the bath has just had decades of use, and only the surface is worn. Underneath, a cast iron or steel bath is usually as strong as ever.
These are the problems we’re asked about most:
- Wear marks under the taps
- Enamel that’s lost its shine and feels rough
- A peeling or bubbling previous coating
- A coloured bath you want in white
What to look for in a quote
- Whether a trained technician does the job
- Is the price fixed, and does it include VAT?
- How long it needs to cure
- What aftercare is recommended
Bath re-enamelling in Minehead without replacing anything
Many of the baths we re-enamel are period roll-tops, which are heavy, hard to move and costly to replace. Doing them in place keeps an original feature. We’re often asked to fix a peeling or bubbling previous coating and a period or roll-top bath worth keeping, across basins & shower trays, cast iron baths and Victorian roll-tops.
We stand behind the work with a one-year guarantee, so you’re covered after the visit.
- Location
- Minehead (TA24)
- County
- Somerset
- Warranty
- 12 months on all our work
- Quotes
- From £350. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Towns and villages near Minehead
Other services in Minehead
What happens on the day
On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. Most visits take most of the day, including clearing up.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- The masking comes off, we tidy up and tell you when it can be used.
Getting ready for the visit
- Let us know which floor the room is on
- Avoid using the area for a few hours before we arrive
- Keep a parking space free if you can
Getting a price
We price from photos so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through.
Related advice
When a repair is not the answer
We won’t take on work that won’t last, so here’s what a repair can’t put right:
- Holes rusted through the metal
- Damage hidden under a previous coating, until it’s stripped back
- Plumbing leaks, which need a plumber
If in doubt, send photos and we will say what we think before booking.
What we work on
- Victorian roll-tops
- Cast iron baths
- Acrylic baths
- Pressed steel baths
- Basins & shower trays
What bath re-enamelling costs
Prices start from £350. Each job gets its own fixed quote. This is what makes a difference:
- How easy the damage is to reach
- Doing more than one item at once
- The material and finish
- Whether old repairs or coatings need taking off
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Getting a price from photos
A couple of clear pictures is all it takes. Try to include:
- Whether it’s been repaired or coated before
- A wider photo showing the whole bath
- The material, if you know it
- Your postcode, so we can check dates
Upload a picture of the damage and one of the whole item, with your TA24 postcode, and we’ll reply with a fixed quote.
DIY kit or professional repair?
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it fails, we can still put it right.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair won’t last.
Where we work around Minehead
Minehead is about 17 miles south-west of Barry, in Somerset. Our repair technicians come to homes and businesses in Minehead, so you don’t need to take anything anywhere. Minehead is one of 640 places in Somerset where we work.
Jobs in TA24 work the same way as everywhere else we cover. From Wellington Square, Market House Lane and Church Road or anywhere nearby, a technician can come to you. Being close to the A39, Minehead is easy for our technicians to reach. We also cover the places around Minehead: Ellicombe (1 mile south-east), Bratton (1 mile west), Dunster (2 miles south-east), Timberscombe (2 miles south) and Carhampton (3 miles south-east). We also work in nearby towns such as Watchet (7 miles east), Wiveliscombe (13 miles south-east), Williton (7 miles east), Nether Stowey (14 miles east), Dulverton (12 miles south) and Porlock (5 miles west). Minehead is among the bigger towns we cover in Somerset.
Local landmarks in Minehead
Our customers here include homes close to Church of St Andrew, Parish Church of St Michael and The Kildare Lodge Inn. Other local landmarks include Minehead First School (under half a mile south-west), Periton Park Court (1.1 miles west) and West Somerset College (0.8 miles south-east). Nearby you will also find Dunster Doll Museum (2 miles south-east) and Dunster Castle (2.1 miles south-east). Open spaces near Minehead include Castle Hill.
Looking after it afterwards
Once the work has cured, treat it gently:
- Stick to gentle, non-abrasive cleaners
- Don’t use the bath until it has fully cured
- Fix dripping taps quickly
- Have chips seen to early
Rinse away dyes, oils and bath bombs straight after use, as they can stain. Fix dripping taps quickly.
Worn enamel only gets rougher with time, and any rust spreads underneath. Resurfacing sooner means less repair work first.
Your questions about bath re-enamelling in Minehead
Is repairing better than replacing?
In most cases, yes. Replacement brings removal, refitting and making good, which a repair avoids. We will be honest if it’s not worth it.
I rent my home. Can I book you?
We can work for tenants, landlords or agents. Just make sure the landlord agrees.
Do you work in Minehead?
Yes. We work across the UK and travel to Minehead and the rest of Somerset. Send us pictures for a fixed quote, or call 0345 017 0787.
Can you make a coloured bath white?
Yes. Coloured baths can be resurfaced in white, and the basin and toilet can be done too.
What if the damage is worse than the photos show?
The price is fixed for what the pictures show. If there is more, we’ll tell you before starting.
How long will the bath be out of use?
Most baths are done in a day, ready the next day. We give you timings with the quote.
How soon can you come?
Your quote comes with available dates. Tell us if you need it done quickly.
What does bath re-enamelling cost?
Prices start from £350. The exact price depends on the damage, so we quote from photos. You’ll get a fixed figure before booking.
Should you replace it?
If you like your bathroom but not your bath’s surface, resurfacing is the simplest answer. Nothing else is disturbed. Prices start from £350. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you’ll get a fixed figure.
Why book with us
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- Most jobs done in one visit
- Same prices wherever you are
Take a look at our full price list and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
