Powys · Wales

Bath re-enamelling & resurfacing in Cwm Crawnon, Powys

Full bath re-enamelling and resurfacing for homeowners, landlords and businesses in Cwm Crawnon. Send photos for a free, fixed quote.

  • Resurfacing from £350
  • A period or roll-top bath worth keeping
  • Brown or grey marks that don’t clean off
Surface Doctor technician refinishing the outside of a roll-top bath

Bath re-enamelling for Cwm Crawnon homes

Work for landlords and builders

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Bath re-enamelling in Cwm Crawnon without replacing anything

We don’t move the bath, so your taps, tiles and plumbing are left alone. Most baths are done in one visit, with the bath ready to use the following day. We are frequently asked to fix wear marks under the taps and an outdated colour you’d like to change, on Victorian roll-tops, acrylic baths and basins & shower trays.

Every job is backed for twelve months. We return to put right any problem with the work.

Location
Cwm Crawnon (NP8, LD3)
Area hub
Powys
Warranty
A year, on every repair
Quote
From £350. Free, fixed price from pictures
Phone
0345 017 0787
Page updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

How the visit works

We turn up at the time we agreed with you and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. The work itself takes a full day, and we leave the room as we found it.

  1. We sheet, mask and ventilate the room.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. The surface is keyed and primed for the new finish.
  5. Several coats of finish are sprayed on, then it cures.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Avoid using the area for a few hours before we arrive
  • Have somewhere for us to park nearby if possible

Get a quote

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You will get a fixed quote, not an estimate.

Send photos for a quote

Read more

Prices and what affects them

Resurfacing from £350. Every quote is fixed and free. What we look at:

  • Access to the area
  • How many areas need work
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes

Set against the cost of replacement, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.

Send photos for a quote

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • A wider photo showing the whole bath
  • Your postcode, so we can check dates
  • Details of any past repairs
  • Natural light rather than flash

For a price in Cwm Crawnon, pictures are the quickest way: a close-up, a wider shot and your postcode. You’ll get a fixed quote with dates to choose from.

How to care for the repair

It’s all simple stuff:

  • Wash away dyes and oils after use
  • Don’t leave a chip unrepaired
  • Keep suction mats out of the bath
  • Repair dripping taps early

A quick rinse and wipe after use helps, particularly where water is hard, so limescale can’t build up.

Avoid scrubbing a dull bath with abrasive cleaners. It removes more of the surface.

Cwm Crawnon questions

How long does re-enamelling last?

It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.

Can you change the colour of my bath?

Yes. We can resurface a coloured bath in white, and the basin and toilet can be done too.

Can you price it without visiting?

Yes, almost always. Clear photos let us give you a fixed price without visiting.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside.

How do I get a price for bath re-enamelling in Cwm Crawnon?

Resurfacing from £350. Every job gets a fixed price from your pictures. Send a close-up of the damage and a wider photo with your NP8 postcode.

Do you cover the whole of Powys?

Everywhere in the UK, Cwm Crawnon included. Travel is included in the price.

What do you need from me?

Some photos, your postcode and how to reach you. On the day, access to the room.

Will there be fumes?

Yes, while we are applying the finish. Ventilation keeps it down, and it fades as the finish cures.

Where we work around Cwm Crawnon

Cwm Crawnon is about 6 miles north of Badminton, in Powys. From the centre of Cwm Crawnon to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Cwm Crawnon is one of 234 towns and villages in Powys we cover. We work right across the region, from Cwm Crawnon to Birmingham (70 miles away).

We cover every part of NP8 and LD3 and the streets around it. Jobs here include addresses on Forge Road, Castle Road and Duffryn Road. We also cover the places around Cwm Crawnon: Coed-yr-ynys (1 mile north-east), Llangynidr (1 mile south-east), Cyffredyn (1 mile east), Bwlch (1 mile north) and Talybont-on-Usk (3 miles north-west). Further out, we also cover Brecon (8 miles north-west), Llanfaes (9 miles north-west), Crughywel (4 miles east), Talgarth (9 miles north) and Pendre (9 miles north-west).

Near you in Cwm Crawnon

Our customers here include homes close to Coach & Horses Inn and Llangynidr C.P. School and the streets around them. A little further out are Ysbyty’r Tri Chwm Hospital (5.5 miles south) and Llangynidr (under half a mile west). Green spaces nearby include Buckland Hill and Cronfa Talybont.

Map of Cwm Crawnon © OpenStreetMap contributors

Materials and what they mean for the repair

Cast iron

A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.

Pressed steel

Steel baths re-enamel well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Honest limits

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Damage hidden under a previous coating, until it’s stripped back
  • A metal bath with a through crack
  • Leaks from fittings rather than the bath

Send us pictures and we will tell you honestly.

What we work on

  • Basins & shower trays
  • Acrylic baths
  • Pressed steel baths
  • Victorian roll-tops
  • Cast iron baths

Repairing versus replacing in Cwm Crawnon

Replacement only makes sense in a few cases: if the bath is cracked through, if you want a different size or shape, or if you’re refitting the entire room anyway. In most other cases, resurfacing is the better choice. Prices start from £350. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.

What you get with us

  • Free fixed quotes from pictures
  • No extra charge for your area
  • Technicians who travel to you, UK-wide
  • Colour mixed on the day to match

Read our full price list or guide to resurfacing and replacement costs.

Can I fix it myself?

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.

You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.