Devon · England

Bath re-enamelling & resurfacing in Dalwood, Devon

Full bath re-enamelling and resurfacing at your home in Dalwood, with a one-year guarantee on every repair.

  • Resurfacing from £350
  • A roll-top that’s seen better days
  • Stains that won’t shift
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath re-enamelling in Dalwood

Common problems we fix in Dalwood

Many baths we resurface have simply been well used, with nothing wrong except the surface. Underneath, a cast iron or steel bath is generally as strong as ever.

Keep an eye out for any of the following:

  • An outdated colour you’d like to change
  • A peeling or bubbling previous coating
  • Enamel that’s lost its shine and feels rough
  • Staining under the taps and around the waste

What to look for in a quote

  • What happens if they find more damage
  • What aftercare is recommended
  • Whether the colour is mixed to match
  • If travel is included in the price

Our hiring checklist

Bath re-enamelling at your home in Dalwood

We clean, repair and prime the bath before spraying the new finish. Most of the work, and most of the durability, is in the preparation, and we take our time over it. We regularly repair basins & shower trays, cast iron baths and Victorian roll-tops, and the jobs we see most are a coating lifting around the plughole and brown or grey marks that don’t clean off.

A one-year guarantee comes as standard, so you’re not left on your own once we have gone.

Area
Dalwood (EX13)
Area hub
Devon
Guarantee
A year, on every repair
Price
From £350. Fixed and free, based on photos
Telephone
0345 017 0787
Updated
23 October 2026
Basin with yellowed glaze resurfaced to a clean white finish

Can I fix it myself?

Kits are cheap and easy to find, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

Landlord and trade work in Dalwood

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Hotels, guest houses and holiday lets cannot afford rooms out of action for long, so most of our work is done in a single visit. We can work around your bookings.

Aftercare tips

It’s all simple stuff:

  • Store bottles off the bath
  • Repair dripping taps early
  • Dry the bath after use to stop limescale
  • Stick to gentle, non-abrasive cleaners

Stick to mild, non-abrasive cleaners, do not use suction bath mats, and do not leave bottles or razors standing on the surface.

Avoid scrubbing a dull bath with abrasive cleaners. It just wears the enamel further and makes resurfacing more work.

Materials and what they mean for the repair

Acrylic

Acrylic baths can be resurfaced too, with a coating system suited to acrylic. The bath needs to be firm and well supported.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

Common questions in Dalwood

Can you do the outside of a roll-top?

Yes, roll-tops are a big part of our work. We resurface the inside, and the outside can be refinished too.

Do I have to be there?

Yes. We need access to the room while we work, at a time that suits you.

Are you a vetted contractor?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

How long does re-enamelling last?

That depends on preparation and how the bath is treated. With good preparation and gentle cleaning it lasts a long time, and it’s guaranteed for a year.

Does the bath have to be removed?

Not at all. We work on the bath in place, with the room masked and ventilated.

Will there be fumes?

Some odour is normal while we spray, so we ventilate the room. It clears as the finish cures.

How do I get a price for bath re-enamelling in Dalwood?

Prices start from £350. The exact price depends on the damage, so we quote from pictures. You’ll get a fixed figure before you book.

What if the damage is worse than the pictures show?

We’ll show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.

What affects the price in Dalwood

Resurfacing from £350. We price every job individually. The main factors are:

  • How hard the colour is to match
  • Doing more than one item at once
  • How much damage there is
  • What kind of damage it is

Set against the cost of replacement, a repair is typically a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you are paying for.

Quotes from your pictures

Before you send photos, a few simple things make all the difference:

  • One picture of the whole bath
  • Daylight if possible, and no flash reflection
  • Any earlier repairs or coatings
  • Any details about the material

Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed quote back. There’s no charge for the quote and you’re under no obligation.

How it works

Once we’re through the door, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes most of the day, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. The bathroom is protected and ventilation set up.
  2. Old sealant is cut out and the bath is deep cleaned.
  3. We repair chips, rust spots and pitting.
  4. We key the bath and apply a bonding primer.
  5. The new finish is sprayed on in several coats and left to cure until the next day.

Getting ready for the visit

  • Mention any earlier repairs or resurfacing
  • Keep pets and children out of the room while we work
  • Mention any parking restrictions or tricky access

Ask for a price

Most clients in Dalwood get their price from photos. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a fixed quote

Read more

Repair or replace in Dalwood?

A replacement often means several trades over several days. Re-enamelling is one technician, normally one day, with the bath back in use the next day. Resurfacing from £350, with every job priced individually. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send photos and you will get a fixed figure.

What you get with us

  • We leave the room as we found it
  • A year’s guarantee on all work
  • Work done at your home or business
  • Everything repaired in place

Read our pricing and guide to resurfacing and replacement costs.

Where we work around Dalwood

Dalwood is about 6 miles east of Honiton, in Devon. Wherever you are in the EX13 postcode area, we come to you. Our technicians cover all 586 towns and villages across Devon.

All of EX13 is covered, from the main roads to the quietest streets. We regularly work on streets such as Dalwood Lane and Newberys. Other places close to Dalwood include Kilmington (2 miles south-east), Shute (2 miles south), Widworthy (2 miles south-west), Wilmington (2 miles west) and Stockland (3 miles north). Further out, we also cover Sidmouth (11 miles south-west), Honiton (6 miles west), Cullompton (15 miles west), Seaton (6 miles south), Cranbrook (15 miles west) and Axminster (3 miles south-east).

Around Dalwood

We visit homes around Church of St Peter. Dalwood’s nearest station is Axminster station, about 3.1 miles south-east. Further afield, we also cover the area around Stockland Great Castle (1.8 miles north-west) and Axminster Hospital (3.3 miles east).

Map of Dalwood © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.