Devon · England

Bath re-enamelling & resurfacing in Kilmington, Devon

Problem with your bath in Kilmington? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Resurfacing from £350
  • Staining under the taps and around the waste
  • A peeling or bubbling previous coating
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath re-enamelling in Kilmington

What a repair cannot fix

To be straight with you, some problems need a different fix:

  • Anything hidden under an old coating, until we remove it
  • Leaking taps or wastes (a plumber’s job)
  • Holes rusted through the metal

Not sure? Send pictures and we will give you a straight answer before booking.

Materials we repair

  • Basins & shower trays
  • Cast iron baths
  • Pressed steel baths
  • Acrylic baths
  • Victorian roll-tops

About our bath re-enamelling in Kilmington

We clean, repair and prime the bath before spraying the new finish. The preparation is what makes it last, so we do not cut corners on it. We work on cast iron baths, Victorian roll-tops and basins & shower trays, and common reasons people contact us are several chips and rust patches and worn patches where water runs and sits.

The work is covered for a year after we finish. If anything is not right, ring us and we will sort it.

Location
Kilmington (EX13)
Area hub
Devon
Warranty
A year, on every repair
Price
From £350. Fixed and free, based on photos
Call
0345 017 0787
Updated
23 October 2026
Before and after: an old basin refinished to bright white

Repairing versus replacing in Kilmington

A new bath means a plumber, lifting out the old bath, making good the walls and tiles and days without a bathroom. Resurfacing renews the entire surface without moving it. Our bath re-enamelling starts from £350. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.

Why us?

  • Work done at your home or business
  • We will tell you if it’s not worth repairing
  • Colours mixed by hand to suit your surface
  • A fixed quote before you book

Read our full price list and bath cost comparison.

Different materials, different repairs

Roll-top and period baths

Freestanding roll-tops can be done inside and out, with the outside refinished as well.

Pressed steel

Pressed steel baths take a new finish well, once any rust has been treated. Rust around the waste is common on steel, so we check it carefully.

What we are called out for in Kilmington

By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.

Typical reasons for a call-out include:

  • An outdated colour you’d like to change
  • Brown or grey marks that do not clean off
  • A peeling or bubbling previous coating
  • A period or roll-top bath worth keeping

Before you book anyone

  • What protection goes down before work starts
  • What preparation is included
  • A fixed price, and whether VAT is included
  • How soon you can use it again

Choosing a repair company

Covering Kilmington

Kilmington is about 7 miles east of Honiton, in Devon. Customers in Kilmington get the same service as everywhere else we cover: a fixed quote from pictures, and a technician at your door on the day. Kilmington is one of 586 places in Devon where we work.

Jobs in EX13 are booked in the same way as anywhere else. From The Street, Well Mead and The Hill or anywhere nearby, we can come to you. If you’re just outside Kilmington, we cover Shute (1 mile south-west), Whitford (2 miles south), Maidenhayne (2 miles south), Musbury (2 miles south) and Kingsdon (3 miles south). We also work in nearby towns such as Sidmouth (11 miles south-west), Honiton (7 miles west), Seaton (5 miles south), Ottery St Mary (11 miles west), Uffculme (15 miles north-west) and Sidford (10 miles south-west).

Local landmarks in Kilmington

Typical jobs here are in homes near Kilmington Primary School, Axe Valley Academy and Old Inn, among other places. For rail, the closest station is Axminster station, roughly 1.5 miles east of the centre. Well-known places in the area include Axminster Hospital (2 miles east) and Museum of Motoring Memories (3.7 miles south).

Map of Kilmington © OpenStreetMap contributors

Kilmington: your questions answered

What does bath re-enamelling cost?

Prices start from £350. Every job gets a fixed quote based on photos of the damage. Send a close-up and a photo of the whole item and your postcode.

Can you re-enamel a roll-top bath?

Yes. We can do the inside and outside.

How soon can you come?

That depends on our diary for your area. We will offer you dates when we send your quote.

Can you quote from photos?

In nearly every case. We only ask to see it in person if the pictures can’t show what we need.

Are you accredited?

We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.

Do you work for landlords and businesses?

Yes. We work for landlords, agents, builders and businesses as well as homeowners in Kilmington.

What information do you need?

Some photos, your postcode and how to reach you. On the day, we only need access to the room.

Is it messy?

We protect the room with dust sheets and masking first, and tidy up before we leave.

Looking after it afterwards

A little care keeps the finish looking good. Our advice:

  • Dry the bath after use to stop limescale
  • Do not leave a chip unrepaired
  • Avoid suction-cup mats
  • A dripping tap should be fixed promptly

Rinse away dyes, oils and bath bombs straight after use, because they can mark the finish. Fix dripping taps quickly.

Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.

What we do, step by step

It’s a tidy, low-fuss visit. We agree the arrival time in advance, cover and mask the work area, then carry out the work, which generally takes a full day. If we find something your pictures didn’t show, we will explain it before carrying on.

  1. We mask and protect the room and ventilate it.
  2. The bath is cleaned, degreased and any chips or rust repaired.
  3. We key the surface and put on a bonding primer.
  4. We spray several coats of new enamel finish.
  5. The bath is left to cure and can usually be used the next day.

Before we arrive

  • Clear toiletries, mats and anything else from around the area
  • Tell us if there are stairs or a lift
  • Have somewhere for us to park nearby if possible

Ask for a price

Send us a picture of the damage and one of the whole item, and tell us you’re in Kilmington, and we will reply with a fixed price.

Get a fixed price

Read more

Landlord and trade work in Kilmington

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We are used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.

DIY repairs versus a professional job

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.