Devon · England
Bath re-enamelling & resurfacing in Shute, Devon
Fixed-price bath re-enamelling in Shute and the surrounding area, done in a single visit in most cases.
- Resurfacing from £350
- An original cast iron bath that needs restoring
- A dull, rough surface that will not come clean
Bath re-enamelling in Shute without replacing anything
Most baths are re-enamelled in a day. Taps, tiles, panels and plumbing all stay in place. Common call-outs are for brown or grey marks that don’t clean off and enamel that’s lost its shine and feels rough, in acrylic baths, Victorian roll-tops and pressed steel baths.
The work is covered for a year after we finish. Just call us if there is a problem and we will come back.
- Area
- Shute (EX13)
- County
- Devon
- Cover
- A year, on every repair
- Quote
- From £350. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
What affects the price in Shute
Resurfacing from £350. Prices are worked out job by job, from your pictures. The main factors are:
- Doing more than one item at once
- What kind of damage it is
- How many areas need work
- Whether old repairs or coatings need taking off
What it costs depends on the type and amount of damage, what it’s made of and how many items we do on one visit. We give a fixed quote from your photos, so you know the cost before you book.
Getting a price from pictures
Most quotes are done from photos alone. To make it quick:
- A picture taken from further back
- The material, if you know it
- Your postcode, so we can check dates
- Details of any past repairs
Ring 0345 017 0787, or send us pictures through the quote form. With one close-up and one wider picture, we can price the job without visiting.
Also near Shute
Other services in Shute
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
Where we work around Shute
Shute is about 4 miles north of Seaton, in Devon. Jobs in Shute are booked in like any other job: a fixed quote from pictures, then a visit to do the work. Shute is one of 586 towns and villages in Devon where we work.
Postcode districts we cover here: EX13. Other places close to Shute include Kilmington (1 mile north-east), Whitford (1 mile south-east), Maidenhayne (2 miles south-east), Kingsdon (2 miles south) and Musbury (2 miles south-east). Larger places within reach include Sidmouth (10 miles south-west), Honiton (6 miles west), Seaton (4 miles south), Cranbrook (15 miles west), Axminster (3 miles east) and Budleigh Salterton (15 miles south-west).
Near you in Shute
Locally, our jobs take us to homes close to Church of St Michael and Shute Community Primary School, among other places. The nearest railway station is Axminster station, about 2.4 miles east of the centre. A little further out are Axminster Hospital (2.9 miles east) and Colcombe Castle (1.6 miles south).
How it works
There’s not much you need to do on the day. Let us in and show us the room, and we’ll take it from there. The job generally runs to the best part of a day, including clearing up.
- We sheet, mask and ventilate the room.
- Old sealant is cut out and the bath is deep cleaned.
- Chips, rust and pitting are repaired.
- The surface is keyed and primed for the new finish.
- The new finish is sprayed on in several coats and left to cure.
Getting ready for the visit
- Keep a parking space free if you can
- Have a window or extractor fan available
- Tell us about parking, stairs or access
Ask for a price
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. You’ll get a fixed price, not an estimate.
Advice
Repair or replace in Shute?
Replacing a bath normally involves a plumber, a fitter and a tiler. Resurfacing is one technician, normally in a day, and the bath can be used the day after. Our bath re-enamelling starts from £350. Instead of hourly rates, we price the entire job up front. Damage, material and access decide it, and doing several items at once reduces it.
Why choose Surface Doctor in Shute
- Straight answers about what a repair can do
- Repair technicians who travel to you, UK-wide
- No extra charge for your area
- One visit for most repairs
See our full price list or resurfacing vs replacement cost guide.
Honest limits
Some jobs are not right for a repair, for example:
- A cast iron or steel bath that’s cracked right through
- A bath that is rusted through
- Anything hidden under an old coating, until we remove it
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Basins & shower trays
- Cast iron baths
- Victorian roll-tops
- Acrylic baths
- Pressed steel baths
Common problems we fix in Shute
Many baths we resurface have simply been well used. The body of the bath is normally perfectly sound.
Send us a photo if you notice any of these:
- An old resurfacing that is failing
- Worn patches where water runs and sits
- Several chips and rust patches
- Enamel that is lost its shine and feels rough
Before booking anyone
- What prep work is covered
- What the guarantee covers, and for how long
- A fixed price, and whether VAT is included
- When it can be used again
Different materials, different repairs
Roll-top and period baths
We can resurface a roll-top inside and out, and the outside can be refinished too.
Cast iron
Re-enamelling suits cast iron baths perfectly. They’re built to last, and only the surface wears, so a new finish makes them look new again.
DIY repairs versus a professional job
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
We understand the appeal of fixing it yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
FAQs for Shute
Can you fix a peeling bath coating?
In most cases. The old coating comes off before we resurface it. Tell us about it when you ask for a quote.
Is there a smell?
There is some smell while the coating is applied, which is why we ventilate the bathroom. It clears as the finish cures.
Can I add another job to the visit?
Yes. Doing several items on one visit usually costs less than separate visits. Include pictures of each item.
Can you price it without visiting?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
What happens once I’ve sent pictures?
You get a fixed price and available dates. If we need another angle, we’ll ask.
What areas do you cover?
We cover the whole UK, including Shute and the rest of Devon. Just include your postcode and we’ll confirm dates.
Can you redo someone else’s repair?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
About our accreditations · Every repair comes with a one-year guarantee.
