Kent · England
Bath Re-enamelling for Danaway homes
Bath re-enamelling in Danaway without the cost of replacing. Send us photos for a fixed price, then we come to you.
- Resurfacing from £350
- Several chips and rust patches
- A roll-top that is seen better days
What affects the price in Danaway
Resurfacing from £350. Prices are worked out job by job. The main factors are:
- How many items we do on one visit
- How much damage there is
- What the surface is made of
- Access to the area
A repair is priced on what needs doing, not your postcode. You’ll see the full price before booking.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Daylight if possible, and no flash reflection
- One sharp close-up of the damage
- The material, if you know it
- Any earlier repairs or coatings
Email us pictures of the damage and a wider shot of the whole item, and tell us you’re in Danaway, and we will come back with a fixed quote.
About our bath re-enamelling in Danaway
Cast iron, steel, acrylic, roll-top and period baths can all be resurfaced. The finish is sprayed on in several coats over a bonding primer, after the bath has been cleaned, repaired and keyed. Whether it’s lots of chips and rust spots and a coloured bath you want in white, we can generally put it right, on acrylic baths, pressed steel baths and cast iron baths alike.
Peace of mind is built in: our one-year guarantee applies to every job, and we’ll explain exactly what it covers when we quote.
- Where
- Danaway (ME9)
- Region
- Kent
- Guarantee
- One year on every repair
- Quotes
- From £350. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Your questions about bath re-enamelling in Danaway
How long does re-enamelling take?
Usually a day, then it’s ready to use the following day. Deeply pitted baths may need a second day.
Is there a guarantee?
All our work carries our one-year guarantee. Ask us what it covers when you get your quote.
Can tenants book a repair?
Of course. Check with your landlord; we can send the quote to them too.
Can you do the outside of a roll-top?
Yes. We can do the inside and outside if you’d like.
Can you resurface a pink bath in white?
Yes, white is the usual choice. Mention the colour you want when you send pictures.
Can you repair something that is been repaired before?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Can pets and children be at home?
Please keep children and pets out of the room during the visit. Everywhere else in the home is fine.
How durable is a resurfaced bath?
It depends on preparation, use and care. Properly prepared and looked after, it lasts well, and our work is guaranteed for a year.
Aftercare tips
Looking after the surface is easy, and it makes a real difference:
- A dripping tap should be fixed promptly
- Wipe the bath dry after use in hard water areas
- Do not leave bottles, razors or sponges standing on the surface
- Don’t let dyes or oils sit on the finish
Wipe the bath dry after use where you can, especially in hard water areas, and rinse off any bath products.
Leave a peeling coating alone. Water gets under it and the damage spreads, so have it stripped and resurfaced.
Landlord and trade work in Danaway
Landlords, letting agents and housing providers in Danaway use us as well as householders. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
When to call us in Danaway
By the time a bath is a few decades old, it may have a mix of issues: dull areas, chips, rust and staining. Re-enamelling deals with all of them in one go.
The things customers typically mention when they call are:
- Brown or grey marks that do not clean off
- Wear marks under the taps
- An outdated colour you’d like to change
- A roll-top that is seen better days
Comparing quotes
- How long it needs to cure
- What protection goes down before work starts
- What the guarantee covers, and for how long
- If travel is included in the price
Nearby places to Danaway
Other services in Danaway
What your bath is made of matters
Pressed steel
Pressed steel baths take a new finish well, as long as any rust is dealt with first. Rust around the waste is common on steel, so we check it carefully.
Roll-top and period baths
We can resurface a roll-top inside and out, with the outside refinished as well.
Honest limits
In fairness, there are a few things a repair won’t fix:
- Plumbing leaks, which need a plumber
- Anything hidden under an old coating, until we remove it
- A bath split right through the body
If in doubt, send pictures and we’ll say what we think.
What we work on
- Cast iron baths
- Pressed steel baths
- Acrylic baths
- Basins & shower trays
- Victorian roll-tops
Our work in Danaway
Danaway is about 3 miles west of Sittingbourne, in Kent. Anywhere in ME9, a technician comes to you. We cover all 922 towns and villages across Kent. Our nearest city page is London, about 35 miles away.
Our visits in ME9 are booked in the same way as anywhere else. We regularly work on streets such as Westfield Gardens, Oak Close and Wormdale Hill. We also cover the places around Danaway: Oad Street (1 mile south-east), Chestnut Street (1 mile north-east), Newington (1 mile north), Keycol (1 mile north-east) and Bobbing (1 mile north-east). We also work in nearby towns such as Maidstone (8 miles south-west), Sittingbourne (3 miles east), Gravesend (14 miles north-west), Whitstable (15 miles east), Faversham (9 miles east) and Minster (8 miles north-east).
Local landmarks in Danaway
We visit homes around Borden Church of England Primary School, Westlands School and Plough & Harrow pub, among other places. The closest station to Danaway is Newington station, about 1.2 miles north of the centre. Nearby you will also find Court Hall Museum (2.7 miles east) and Bayford Court (3 miles east). The countryside around Danaway includes Detling Hill.
- Local facilities include Sittingbourne and Milton Urban District (2.7 miles east)
How the visit works
We work cleanly and quietly. We protect the area first, then the work takes most of the day. Before we leave, we explain how soon it can be used and how to care for it.
- First we look the bath over and confirm the finish.
- Everything around the bath is masked and covered.
- We degrease the bath, fix any damage and key the surface.
- Primer and finish coats are applied.
- We remove the masking, tidy up and give you the curing time.
How to prepare
- Keep a parking space free if you can
- Tell us about parking, stairs or access
- Move bottles, mats and clutter away from the area
Getting a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Read more
DIY kit or professional repair?
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
A DIY attempt is not a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.
About our accreditations · Every repair comes with a one-year guarantee.
